Brother Super Galaxie 2 Manual

							Please visit us at http://solutions.brother.com where you can get 
product support and answers to frequently asked questions (FAQs).
Operation Manual
Embroidery and Sewing Machine
Product Code: 882-W04/W05 
						

							Trademarks
FlashFX® is a registered trademark of Datalight, Inc.
FlashFX® Copyright 1998-2007 Datalight, Inc.
U.S.Patent Office 5,860,082/6,260,156
FlashFX
® Pro™ is a trademark of Datalight, Inc.
Datalight® is a registered trademark of Datalight, Inc.
Copyright 1989-2007 Datalight, Inc., All Rights Reserved
Video powered by Mobiclip™ encoding and playback technology. 
IMPORTANT:
READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.
By downloading, copying, installing or using the software you agree to this license. If you do not agree 
to this license, do not download, install, copy or use the software.
Intel License Agreement For Open Source Computer Vision Library
Copyright © 2000, Intel Corporation, all rights reserved. Third  party copyrights are property of their respective owners.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the 
following conditions are met:
 Redistribution’s of source code must retain the above copyright notice, this list of conditions and the following 
disclaimer.
 Redistribution’s in binary form must reproduce the above copyright notice, this list of conditions and the  following disclaimer in the documentation and/or other materials provided with the distribution.
 The name of Intel Corporation may not be used to endorse or promote products derived from this software  without specific prior written permission.
This software is provided by the copyright holders and contributors “as is” and any express or implied warranties, 
including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are 
disclaimed. In no event shall Intel or contributors be liable for any direct, indirect, incidental, special, exemplary, 
or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, 
data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict 
liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if 
advised of the possibility of such damage.
All information provided related to future Intel products and plans is preliminary and subject to change at any time, without n otice.
Secure Digital (SD) Card is a registered trademark or a trademark of SD Card Association.
CompactFlash is a registered trademark or a trademark of Sandisk Corporation.
Memory Stick is a registered trademark or a trademark of Sony Corporation.
SmartMedia is a registered trademark or a trademark of Toshiba Corporation.
MultiMediaCard (MMC) is a registered trademark or a trademark of Infineon Technologies AG.
xD-Picture Card is a registered trademark or a trademark of Fuji Photo Film Co. Ltd.
IBM is a registered trademark or a trademark of International Business Machines Corporation.
Microsoft, Windows and Windows Vista are registered trademarks or trademarks of Microsoft Corporation.
“Adobe” and “Adobe Reader” are either registered trademarks or trademarks of Adobe Systems Incorporated in the 
United States and/or other countries.
Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary prog rams.
All other brands and product names  mentioned in this manual are registered trademarks of their respective companies. However, t he 
explanations for markings such as ® and ™ are not clearly described within the text. 
						

							INTRODUCTION
1
INTRODUCTION
Thank you for purchasing this embroidery and sewing machine. Before using this machine, carefully read 
the “IMPORTANT SAFETY INSTRUCTIONS”, and then study this manual for the correct operation of the 
various functions.
In addition, after you have finished reading this manual, store it where it can quickly be accessed for 
future reference.
 
IMPORTANT SAFETY INSTRUCTIONS
Please read these safety instructions before attempting to use the machine.
DANGER- To reduce the risk of electric shock
1Always unplug the machine from the electrical outlet immediately after using, when cleaning, when making any 
user servicing adjustments mentioned in this manual, or if you are leaving the machine unattended. 
WARNING- To reduce the risk of burns, fire, electric shock, or injury to persons.
2Always  unplug the machine from the electrical outlet when removing covers, or when making any adjustments 
mentioned in the instruction manual.
 To unplug the machine, switch the machine to the symbol “O” position to turn it off, then grasp the plug and pull  it out of the electrical outlet. Do not  pull on the cord.
 Plug the machine directly into the electrical outlet. Do not use an extension cord.
 Always  unplug your machine if the power is cut.
3Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped 
or damaged, or water is spilled on the unit. Return the machine to the nearest authorized dealer for examination, 
repair, electrical or mechanical adjustment.
 While the machine is stored or in use if you notice anything unusual, such as an odor, heat, discoloration or  deformation, stop using the machine immediately and unplug the power cord.
 When transporting the sewing machine, be sure to carry it by its handle. Lifting the sewing machine by any other  part may damage the machine or result in the machine falling, which could cause injuries.
 When lifting the sewing machine, be careful not to make any sudden or careless movements, otherwise you may  injure your back or knees.
4Always  keep your work area clear:
 Never  operate the machine with any air openings blocked. Keep ventilation openings of the sewing machine 
and foot control free from the build up of lint, dust, and loose cloth.
 Do not  store objects on the foot controller. 
 Do not  use extension cords. Plug the machine directly into the electrical outlet.
 Never  drop or insert  any object into any opening.
 Do not  operate where aerosol (spray) products are being used or where oxygen is being administered. 
 Do not  use the machine near a heat source, such as a stove or iron; otherwise, the machine, power cord or 
garment being sewn may ignite, resulting in fire or an electric shock.
 Do not  place this sewing machine on an unstable surface, such as an unsteady or slanted table, otherwise the 
sewing machine may fall, resulting in injuries. 
						

							IMPORTANT SAFETY INSTRUCTIONS
2
5Special care is required when sewing:
• Always  pay close attention to the needle. Do not use bent or damaged needles.
 Keep fingers away from  all moving parts. Special care is required around the machine needle.
 Switch the sewing machine to the symbol “O” position to turn it off when making any adjustments in the needle  area.
 Do not  use a damaged or incorrect needle plate, as it could cause the needle to break.
 Do not  push or pull the fabric when sewing, and follow careful instruction when free motion stitching so that 
you do not deflect the needle and cause it to break.
6This machine is  not a toy:
 Your close attention is necessary when the machine is used by or near children.
 The plastic bag that this sewing machine was supplied in should be kept out of the reach of children or disposed  of. Never allow children to play with the bag due to the danger of suffocation.
 Do not use outdoors.
7For a longer service life:
 When storing this machine, avoid direct sunlight and high humidity locations. Do not use or store the machine  near a space heater, iron, halogen lamp, or other hot objects.
 Use only neutral soaps or detergents to clean the case. Benzene, thinner, and scouring powders can damage the  case and machine, and should never be used.
 Always consult the operation manual when replacing or installing any assemblies, the presser feet, needle, or  other parts to assure correct installation.
8For repair or adjustment:
 If the light unit is damaged, it must be replaced by an authorized dealer.
 In the event a malfunction occurs or adjustment is required, first follow the troubleshooting table in the back of  the operation manual to inspect and adjust the machine yourself. If the problem persists, please consult your 
local authorized Brother dealer.
Use this machine only for its intended use as described in the manual.
Use accessories recommended by the manufacturer as contained in this manual.
Use only the interface cable (USB cable) included with this machine.
Use only the USB mouse included with this machine.
Use only the pen tablet included with this machine.
The contents of this manual and specifications of this product are subject to change without notice.
For additional product information and updates, visit our website at www.brother.com
SAVE THESE INSTRUCTIONS
This machine is intended for household use.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or 
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or 
instruction concerning use of the appliance by a person responsible for their safety. Children should be 
supervised to ensure that they do not play with the appliance. 
						

							IMPORTANT SAFETY INSTRUCTIONS
3
FOR USERS IN THE UK, EIRE, MALTAAND CYPRUS ONLY
IMPORTANT
 In the event of replacing the plug fuse, use a fuse approved by ASTA to BS 1362, i.e. carrying the   mark, 
rating as marked on plug.
 Always replace the fuse cover. Never use plugs with the fuse cover omitted.
 If the available electrical outlet is not suitable for the plug supplied with this equipment, you should contact your  authorized dealer to obtain the correct lead. 
Federal Communications Commission (FCC) 
Declaration of Conformity (For USA Only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this 
device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, 
the user is encouraged to try to correct the interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
 The included interface cable should be used in order to ensure compliance with the limits for a Class B digital  device.
 Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user’s authority to  operate the equipment.
Responsible Party: Brother International Corporation
100 Somerset Corporate Boulevard
Bridgewater, NJ 08807-0911 USA
TEL : (908) 704-1700
declares that the product
Product Name:
Model Number: Brother Sewing Machine
NV6700D 
						

							IMPORTANT SAFETY INSTRUCTIONS
4
WARNING LABEL
The following warning label is on the included side cutter. Be sure to observe the precaution.
Label location
 CAUTION
• When using the side cutter, sew between low and mid-speed and do not touch the knives or operation lever of the side cutter while sewing to avoid equipment damage or injury.
a Guide plate (lower knife)
b Upper knife
c Operation lever 
						

							IMPORTANT SAFETY INSTRUCTIONS
5 
						

							6
OUTSTANDING FEATURES
Display the Fabric While 
Aligning the Embroidering 
Position
The fabric hooped in the embroidery frame can be 
displayed on the LCD so that the embroidery 
position can be easily aligned.
This feature allows you to easily combine patterns 
while checking the final image.
See “Display the Fabric While Aligning the 
Embroidering Position” on page 211.
Change the Pattern Size While 
Maintaining the Desired Thread 
Density (Stitch Recalculator)
In the embroidery edit screen, the size of the 
pattern can be changed while the desired thread 
density is maintained.
With this function, the pattern will be enlarged or 
reduced at a larger ratio than with normal pattern 
resizing.
See “Changing the Pattern Size While Maintaining 
the Desired Thread Density (Stitch Recalculator)” 
on page 270.
Expand Your Creativity With 
Bobbin Work
Example with decorative stitches
You can create bobbin work, which gives a three-
dimensional appearance to the surface of the 
fabric, by winding the bobbin with heavy weight 
thread or ribbon too thick to be fed through the 
sewing machine needle and sewing on the wrong 
side of the fabric.
Bobbin work is sewn using the special bobbin case 
(gray) included with this machine.
See “How to Create Bobbin Work” on page 307. 
						

							7
Find New Color Schemes With 
the Color Shuffling Function
With the color shuffling function, the machine 
suggests new color schemes for the embroidery 
pattern that you have selected. After you select the 
desired effect from one of the four available color 
schemes (“RANDOM”, “VIVID”, “GRADIENT” 
and “SOFT”) the sample for the selected effect is 
displayed.
See “Find New Color Schemes With the Color 
Shuffling Function” on page 283.
Create Patterns With My Custom 
Design
Any image that you draw in the LCD screen area 
of your machine can immediately become an 
embroidery pattern. Specify colors and sewing 
settings as you desire.
Compose embroidery from children’s drawings or 
of your signature to add to your original artwork. 
This is a function that everyone will enjoy using.
The included pen tablet makes this function even 
easier to use.
Refer to the instruction manual (PDF format) stored 
in the My Custom Design CD.
Easily Perform My Custom 
Design Operations With the 
Included Pen Tablet
The included pen tablet can be used to perform 
My Custom Design operations effectively, along 
with normal screen operations. Since the range of 
operation with the pen tablet is wider than the 
machine’s LCD screen, you can easily perform 
intricate procedures.
See “Using the Pen Tablet” on page 23 and “Using 
the Pen Tablet” on page 34. 
						

							8
WHAT YOU CAN DO WITH THIS MACHINE
Getting Ready
To learn the operation of the principal parts and the 
screens
Sewing Basics
To learn how to prepare for sewing and basic sewing 
operations
Chapter 1
Page 25
Chapter 2
Page 71
Utility Stitches
Pre-programmed with more than 100 frequently used 
stitches
Character/Decorative 
Stitches
The variety of stitches widen your creativity
Chapter 3
Page 89
Chapter 4
Page 155
Embroidery
Maximum 30 cm × 20 cm (approx. 12 × 8 inches) for 
large embroidery designs
Embroidery Edit
Designs can be combined, rotated or enlarged
Chapter 5
Page 185
Chapter 6
Page 263
How to Create Bobbin 
Wo r k
To learn how to create bobbin work
My Custom Stitch
Create original decorative stitches
Chapter 7
Page 307
Chapter 8
Page 325
Appendix
Caring for your machine and dealing with errors and 
malfunctions
Chapter 9
Page 337