Brother Super Galaxie 2 Manual

ERROR MESSAGES
349
Appendix
9
This message appears when 
there are not enough colors in 
the custom thread table, to 
display the color scheme you 
have selected to display.
In this case, set more colors 
in the custom thread table 
(See page 278), or select 
less colors in the color 
shuffling function. (See 
page 283.)
This message appears when 
there are not enough colors in 
the thread table, to display 
the color scheme effect you 
have selected.
In this case, select another 
effect or the custom...

ERROR MESSAGES
350
This message is displayed 
when the “Reverse/
Reinforcement Stitch” button 
is pushed while the 
embroidery unit is attached.
This message is displayed 
when the foot controller is 
pressed while the embroidery 
unit is attached and machine 
is set up for embroidering.
This message is displayed 
when the patterns you are 
editing take up too much 
memory, or if you are editing 
too many patterns for the 
memory. 
This message is displayed 
when a key on the LCD 
display is touched...

ERROR MESSAGES
351
Appendix
9
This message is displayed 
when the machine is in 
embroidery edit mode, and 
you try to use an editing 
function when the pattern is 
not completely within the red 
outline. 
This message is displayed 
when you try to save a 
copyright protected pattern to 
USB media/Computer. 
According to copyright laws, 
patterns that are illegal to 
reproduce or edit cannot be 
saved to USB media or 
computer. If this message 
displays, save the pattern in 
the machine’s memory. 
This...

ERROR MESSAGES
352
This message is displayed 
when the machine failed to 
recognize the embroidery 
positioning mark.
- Confirm that the embroidery positioning mark is in the 
selected area. If problem 
persists, see page 215 to 
reposition mark.
- Machine failed to recognize 
printed positioning mark. 
Set “Page Scaling” to “None 
(100%)”, and try printing the 
embroidery positioning 
mark again. (see page 226)
This message is displayed 
when the machine has 
recognized the embroidery 
position mark....

ERROR MESSAGES
353
Appendix
9
This message is displayed 
when the machine is 
retrieving a previously saved 
pattern while in embroidery 
edit mode. 
This message is displayed 
when, after selecting a 
pattern, , , or   is 
pressed and the pattern is 
about to be deleted. 
This message is displayed 
when the bobbin is being 
wound, and the motor locks 
because the thread is 
tangled, etc. 
This message is displayed 
when there is a possibility 
that the data for the selected 
pattern is corrupted.
This...

ERROR MESSAGES
354
This message is displayed 
when you attempt to select a 
pattern after the USB media 
in which the pattern is saved 
has been changed.
This message is displayed 
when an error occurs with the 
USB media.
This message is displayed 
while the USB media is 
transmitting.
This message is displayed 
when the memory is full and a 
pattern must be deleted.
This message is displayed 
when a button, such as the 
“Start/Stop” button, is pushed 
while the presser foot is 
raised.This message is...

ERROR MESSAGES
355
Appendix
9
■Alarm Sounds 
If the operation was performed incorrectly, an alarm 
sounds to indicate that an error occurred. If the 
operation was performed correctly, the machine 
beeps to confirm the operation.
 
This message appears if the 
file format is incompatible 
with this machine. Check the 
list of compatible file formats. 
(see page 40.)
This message is displayed 
when the image is deleted.
This message is displayed 
when you press 
 in the screen 
other than the Utility...

SPECIFICATIONS
356
SPECIFICATIONS
* Please be aware that some specifications may change without notice.
ItemSpecification
Sewing Machine 
(Box 1 of 3) Dimensions of machine
Approx. 61.5 cm (W) × 33.2 cm (H)  × 27.0 cm (D) (approx. 
24-7/32 inches (W)  × 13-5/64 inches (H)  × 10-5/8 inches (D))
Dimensions of box Approx. 68.5 cm (W) × 47.0 cm (H)  × 39.0 cm (D) (approx. 
26-31/32 inches (W)  × 18-1/2 inches (H)  × 15-11/32 inches 
(D))
Weight of machine Approx. 15 kg (approx. 33 lb)
Weight of box (for...

UPGRADING YOUR MACHINE’S SOFTWARE
357
Appendix
9
UPGRADING YOUR MACHINE’S SOFTWARE
You can use USB media or a computer to upgrade software for your sewing machine.
When an upgrade program is available on “ http://solutions.brother.com ”, please download the files 
following the instructions on the website and steps below.
Upgrade Procedure Using USB 
Media
aWhile pressing the “Automatic Threading” 
button, turn the main power to ON.
→The following screen will appear on the LCD.
bPress .
cInsert the USB...

UPGRADING YOUR MACHINE’S SOFTWARE
358
eRemove the USB media, and turn the 
machine off and on again.
Upgrade Procedure Using 
Computer
aWhile pressing the “Automatic Threading” 
button, turn the main power to ON.
→The following screen will appear on the LCD.
bPress .
cPlug the USB cable connector into the 
corresponding USB ports for the computer 
and for the machine.
→“Removable Disk” will appear in “Computer (My 
computer)”.
dCopy the upgrade file to “Removable Disk”.
→The following message will...