Brother Super Galaxie 2 Manual

USING THE MEMORY FUNCTION
Character/Decorative Stitches
179
4
bInsert the USB media into the primary (top) 
USB port on the machine.
aPrimary (top) USB port for media
b USB media
cPress .
* Press   to return to the original screen without 
saving.
→ The “Saving” screen is displayed. When the pattern 
is saved, the display returns to the original screen 
automatically.
Saving Stitch Patterns in the 
Computer
Using the included USB cable, the machine can 
be connected to your computer, and the stitch...

USING THE MEMORY FUNCTION
180
cPress .
dPress .
* Press   to return to the original screen without saving.
→ The stitch pattern will be temporarily saved to 
“Removable Disk” under “Computer (My 
computer)”.
eSelect the stitch pattern’s .pmx file and 
copy the file to the computer.
Retrieving Stitch Patterns from 
the Machine’s Memory
aPress .
→The pocket selection screen appears.
Note
 Do not turn off the machine while the “Sav-
ing” screen is showing. You may lose the 
data.  

USING THE MEMORY FUNCTION
Character/Decorative Stitches
181
4
bChoose a stitch pattern to retrieve.
* If the entire saved stitch pattern is not displayed, press the thumbnail.
* Press   to return to the original screen without  saving.
a Saved stitch patterns
cPress . 
* Press   to delete the stitch pattern.
→The selected stitch pattern is retrieved and the 
sewing screen will be displayed. 
Recalling from USB Media
You can recall a specific stitch pattern from either 
direct USB media or a folder in the...

USING THE MEMORY FUNCTION
182
cPress   when there is a subfolder to 
sort two or more stitch patterns to USB 
media, the stitch pattern in the subfolder is 
displayed.
* Press   to return to the original screen without recalling.
a Folder name
b Stitch patterns in a folder show only the first pattern 
of any combined patterns.
c Path
→ The path shows the current folder at the top of the 
list.
Stitch patterns and a subfolder within a folder are 
displayed.
* Press   to return to the previous folder.
*...

USING THE MEMORY FUNCTION
Character/Decorative Stitches
183
4
cMove/copy the pattern data to “Removable 
Disk”.
→Stitch pattern data in “Removable Disk” is written to 
the machine.
dPress .
→The stitch patterns in the computer are displayed on 
the selection screen.
ePress the key of the stitch pattern you want 
to recall.
* Press   to return to the original screen without 
recalling.
fPress . 
* Press   to delete the stitch pattern. The pattern will be deleted from the “Removable 
Disk” folder in your...

USING THE MEMORY FUNCTION
184 

Chapter 5
Embroidery
BEFORE EMBROIDERING ..................................... 186
Embroidery Step by Step .........................................................186
Attaching Embroidery Foot “W” .............................................187
Attaching the Embroidery Unit ...............................................188
■About the Embroidery Unit ............................................................. 188
■ Removing the Embroidery Unit ..........................................................

BEFORE EMBROIDERING
186
BEFORE EMBROIDERING
Embroidery Step by Step 
Follow the steps below to prepare the machine for embroidery. 
Step 3
Step 1, 2 Step 7 Step 5 Step 4 Step 6, 8
Step 9
Step #AimActionPage
1 Presser foot attachment Attach embroidery foot “W”. 187
2 Checking the needle Use needle 75/11 for embroidery. * 69
3 Embroidery unit attachment Attach the embroidery unit.  188
4 Bobbin thread setup For the bobbin thread, wind embroidery bobbin thread and set it in place.  48
5 Fabric preparation...

BEFORE EMBROIDERING
Embroidery
187
5
Attaching Embroidery Foot “W” 
Press  →   →    → 
  →    in this order to display a 
video example of attaching embroidery foot “W” 
(see page 46). Follow the steps explained below to 
complete the operation.
aPress the “Needle Position” button to raise 
the needle. 
bPress .
→ The entire screen becomes white, and all keys and 
operation buttons are locked.
cRaise the presser foot lever.
dPush the black button on the presser foot 
holder and remove the presser foot....

BEFORE EMBROIDERING
188
gHold the embroidery foot in place with 
your right hand, and then use the included 
screwdriver to securely tighten the presser 
foot holder screw.
hPress   to unlock all keys and 
buttons.
→All keys and operation buttons are unlocked, and 
the previous screen is displayed.
Attaching the Embroidery Unit
Press   →   →    → 
  →    in this order to display a 
video example of attaching the embroidery unit 
(see page 46). Follow the steps explained below to 
complete the operation....