Brother Ql570 Owners Manual

Appendix
For Mac31
Introduction
Creating Labels
2Click .
3Delete [Applications]-[P-touch Editor 5.0] folder.
P-touch Editor has been uninstalled. 
Uninstalling the Printer Driver
1Turn off the Brother QL-570.
2Double-click the drive where Mac OS® X is installed, and double-click [Applications]-
[Utilities]-[Printer Setup Utility].
The [Printer List] dialog box appears.
3Choose QL-570, and click  (Delete).
4Close the [Printer List] dialog box.
The printer driver has been uninstalled.
Before you delete the...

Appendix
For Mac32
Introduction
Creating Labels
LED lamp on the QL-570 indicates the current operating condition.
LED Lamp
LampCondition
Not lighting
Power is OFF.
Green lamp is lighting
Power is ON.
Orange lamp is lighting
The roll cover is opening. Close the roll cover properly.
Orange lamp is flashing
Cooling
(Waiting for temperature of print head to lower)
Red lamp is flashingIndicates one of the following errors.
• Label sensor error
(End of DK Roll or label jam)
• Incorrect DK Roll installed
•...

Appendix
Print head maintenance33
Introduction
Creating Labels
Maintenance of the machine must be done as needed. However, some environments require that maintenance 
must be done more frequently (e.g. in dusty conditions). 
Print head maintenance
The DK Roll (thermal recording paper type) used with the machine is designed to clean the print head 
automatically. When the DK Roll passes the print head during printing and label feeding, the print head is 
cleaned. If the print head is not cleaned enough,...

Appendix
Label outlet maintenance34
Introduction
Creating Labels
4Remove the backing paper   and insert the edge   of cleaning sheet into the printing 
unit until the area pointed with arrow in the diagram below.
5Close the DK Roll compartment cover and press the ON/OFF button ( ) to turn the 
Brother QL-570 on.
6Press the Feed button for more than one second.
The roller spins by 4 (10 cm).
The adhesive face of cleaning sheet removes the stain or 
dust on the roller.
Label outlet maintenance
When the...

Appendix
Potential types of problems35
Introduction
Creating Labels
If the problems occur while using this machine, the following may help you to solve the problems.
Potential types of problems
Troubleshooting
ProblemSolution
• The QL-570 does not print, or a printing error is 
received. • Is the USB cable loose? 
Check that the USB cable is connected correctly.
• Is the DK Roll installed correctly?  If not, remove the DK  Rolls and reinstall.
• Is there enough roll remaining?  Check that there is enough...

Appendix
Product Specifications36
Introduction
Creating Labels
Product Specifications
Operating Environment
*1 The computer should meet Microsoft®’s recommendations for the OS installed. 
*2 Required available space when installing the software with all of the options.
Specifications
ItemsSpecifications
Display LED lamp (green, red, orange)
Printing
Printing method Direct thermal printing via thermal head
Printing speedMax. 4.3 inch (110 mm)/sec, Max. 68 labels/min. 
(Standard Address Labels)
Print head...