Home > Brother > Printer > Brother Print Server Nc 4100h User Guide

Brother Print Server Nc 4100h User Guide

Here you can view all the pages of manual Brother Print Server Nc 4100h User Guide. The Brother manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 161

APPENDIX
APPENDIX-3
B
Appendix B
      Using Services
General
A service is a resource that can be accessed by computers that wish to print to the
Brother print server. The Brother print server provides the following predefined
services (do a SHOW SERVICE command in the Brother print server remote console
to see a list of available services):
Service Definition
BINARY_P1 TCP/IP binary and LAT service
TEXT_P1 TCP/IP text service (adds carriage return after
each line feed).
POSTSCRIPT_P1 PostScript service...

Page 162

APPENDIX
C
The firmware on th e print server is stored in flash memory . This means that you can 

Page 163

APPENDIX
APPENDIX-5
Reloading firmware using BRAdmin
The BRAdmin utility can be used to easily re-program your Brother print server.
1.
 Start the BRAdmin software.
2.
 Highlight the appropriate print server. Then press select the Control menu
and choose Load Firmware. You can select more than one print server by
pressing CTRL+ or SHIFT+ on each additional print server.
There are three possible ways of sending the new software version to the print server.
For which ever method you select, you must enter...

Page 164

APPENDIX
APPENDIX-6
Reloading process
The Data LED on the printer front panel will blink during the firmware file loading
process and then Alarm LED will turn on and the Ready LED will blink during the
programming process, and the printer will restart automatically after the
programming has completed. DONT TURN OFF THE PRINTER DURING THESE
PROCESSES.
If the Data LED does not stop blinking after about two minutes, or Alarm and the
other LED blink periodically, check to make sure that you correctly entered...

Page 165

APPENDIX
APPENDIX-7
Reloading using the FTP Protocol
from a command prompt
By specifying the print server PASSWORD AS THE USERNAME when logging on,
it becomes possible to upgrade the firmware of the print server or printer (if
supported). The following example assumes that the print server password is
“cambridge”
D:\>ftp
ftp> open 220.0.250.200
Connected to 220.0.250.200.
220 FTP print service:V-1.05/Use the network password for
the ID if updating.
User (220.0.250.200:(none)): cambridge
230 User...

Page 166

APPENDIX
APPENDIX-8
Reloading using the FTP Protocol
from a Web Browser
Please visit the Brother WWW server at www.brother.com for more information on
upgrading the print server using a web browser. 

Page 167

INDEX
Index-1
INDEX
A
AIX1-3
AIX 4.01-8
AppleTalk7-1, 7-3, 13-3, 13-17
ARP1-2, 12-1, 12-6
B
Banyan VINES10-1, 13-21
Berkeley UNIX1-1
BINARY_P11-1, 1-4, Appendix-3
BINDERY6-2
BIP5-1
BOOTP1-2, 12-9
BRAdmin12-4
BR-Script  PPD installer7-2
Brother LPR port3-4
Brother NetBIOS Port Monitor4-2, 4-4
Brother Peer to Peer Print3-4
Browser11-2
C
CFGTCP1-11
Chooser7-1
D
DEC1-11
DEC LAT9-1
DECprint9-10
Desktop Printer7-4
DHCP1-2, 3-1, 4-1, 12-1, 12-6
DLC8-1, 8-2
DLC/LLC13-18
DNS11-2
DOMAIN4-2
DOS4-1, 9-7
E
E-mail5-2...

Page 168

INDEX
Index-2 Microsoft Internet Explorer2-1
Microsoft Internet Print Services2-1, 3-1
Microsoft TCP/IP printing2-1
MIME5-2
N
NDPS6-2, 6-3
NDS6-2
NET USE4-8
NetBIOS2-6, 4-1, 4-8, 13-12
Netware GETAppendix-5
NetWare 36-2, 6-5
NetWare 46-2, 6-5
NetWare 56-2, 6-3
network neighborhood4-1
Novell13-3
Novell Distributed Print Services6-3
Novell NetWare13-15
NT 4.02-1
NWADMIN6-2
O
OS/22-9
OS/2 Warp4-8
OS/2 Warp Server2-1, 2-9
OS/4001-11
P
password1-1, 2-1, 3-1, 4-1, 5-1
PATHWORKS9-7, 9-8, 9-9
PCONSOLE6-5...
Start reading Brother Print Server Nc 4100h User Guide

Related Manuals for Brother Print Server Nc 4100h User Guide

All Brother manuals