Brother Mfc 8600 12ppm 600dpi Multifunction Laser Fax Printe Owners Manual

ON-SCREEN PROGRAMMING3 - 3
1. Fax Functions (CONTINUED)
2. SETUP RECEIVE
Function Description Factory Set Page
1. RING DELAYNumber of rings before machine 04 5-2
answers in FAX or FAX/TEL mode.
2. F/T RING TIMESets the time for Òdouble ringÓ in 20 SEC 5-2
FAX/TEL mode.
3. EASY RECEIVEReceive fax messages without O N 5-3
pressing the Start key.
4. REMOTE CODEEnter code to activate or deactivate ON (
51, #51) 5-7
machine from a remote location.
5. REDUCTIONReduces size of image. AUTO 5-4
If cassette #2 is...

ON-SCREEN PROGRAMMING3 - 4
6.  SET AUTO DIAL
Function Description Factory Set Page
1. ONE-TOUCH DIALDial numbers stored in memory Ñ 7-1
by pressing only one key.
2. SPEED-DIALDial numbers stored in memory Ñ 7-2
by pressing only three keys.
3. SETUP GROUPSSet up a Group number for Ñ 7-3
broadcasting.
5. INTERRUPT
Function Description Factory Set Page
Interrupting a pollingSend a fax now, even if you have Ñ 6-13
or transmit jobthe machine set to send a fax later,
or if you have it set for Polling.
4....

ON-SCREEN PROGRAMMING3 - 5
1. Fax Functions (CONTINUED)
0. MISCELLANEOUS
Function Description Factory Set Page
1. DISTINCTIVEUse with telephone companyÕs O F F 5-12
distinctive ringing service to
register the ring pattern on the
machine.
2. CALLER IDView or print a list of the last 30 Ñ 5-13, 14
Caller IDs stored in memory.
3. COPY CONTRASTYou can make copies darker or Ñ 11-1
lighter.
4. DRUM LIFEYou can check the percentage of Ñ 17-27
drum life that remains available.
8.  REMOTE FAX OPT
Function...

ON-SCREEN PROGRAMMING3 - 6
Function Description Factory Set Page
1. QUALITYSelect Normal or High print HIGH See MFC
quality. Software
Manual 1-3
2. VIDEO TYPESelect Moving or Still video MOVING See MFC
signal. Software
Manual 1-3
3. PRINT SIZESelect the size for printed video 5.75 x 4.25 See MFC
capture frames. Software
Manual 1-3
3. Video Functions (For MFC 8600 and MFC 8700 Only)
2. RESET PRINTER
Function Description Factory Set Page
1. FACTORY SETYou can restore the printer back Ñ 14-8
to the factory...

INITIAL SETUP4 - 1
4 4
Getting Started
Setting Dialing Mode (Tone/Pulse)
Your machine comes set to accommodate tone (multi-frequency) dialing
service. If you have pulse (rotary) dialing service, you need to change the
dialing mode.
1For the FAX, press  Function, 1, 1.
For the MFC, press 
Function, 1, 1, 1.
2Use  or  to select dialing modeDIALING:TONE?
SELECT  & SETand press Set.
DIALING:PULSE?
SELECT  & SET
3Press Stop to exit.
Setting Date and Time
Your machine displays the date and time, and prints it...

INITIAL SETUP4 - 2
Setting Station ID
You can store your name, fax number, and telephone number to be printed
on all fax pages you send. See Composing Electronic Cover Page, page 6-5.
1For the FAX, press Function, 1, 3.
For the MFC, press 
Function, 1, 1, 3.
2Enter your fax number (up to 20FAX:ENTER & SET digits) and press Set.
You must enter a fax number
to proceed.
3Enter your telephone number (upTEL:
ENTER & SET
to 20 digits)  and press Set.
If your telephone number and fax
number are the same, enter...

INITIAL SETUP4 - 3
Inserting spaces
If you want to enter a blank space, press  once between numbers and
twice between characters.
Making corrections
If you entered a letter incorrectly and want to change it, press  to move
the cursor after the last correct letter. Then press 
Clear; all letters  above
and to the right of the cursor are deleted.  Re-enter the correct text and/or
digits.  Also, you can back up and type over incorrect letters.
Repeating letters
If you need to enter a character assigned to...

INITIAL SETUP4 - 4
Setting Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The default setting is
LOW. When the beeper is set to LOW or HIGH, the machine beeps every
time you press a key or make an error, and at the end of fax sending or
receiving.
1For the FAX, press Function, 1, 4.
For the MFC, press 
Function, 1, 1, 4.
2Press  or  to select your setting and press Set.
3Press Stop to exit.
Choosing the Handset Volume
Before you begin to use the machine, you must decide if you need to set
the...

INITIAL SETUP4 - 5
Setting Volume  Amplify
Please carefully read ÒChoosing the Handset Volume,Ó page 4-4 before
you do the following steps:
1For the FAX, press Function, 1, 7.
For the MFC, press 
Function, 1, 1, 7.
2If none of the users areVOL AMPLIFY:ON?
SELECT  & SET
hearing-impaired, press  or 
to select VOL AMPLIFY:OFF?
and press 
Set, then go to Step 4
ÑORÑ
If some or all of the users
are hearing-impaired, select
VOL AMPLIFY:ON? and press 
Set.
3If all the users are hearing-impaired,PERMANENT?...

INITIAL SETUP4 - 6
Sleep Mode
Setting the Sleep Mode reduces power consumption while the machine is
idle.  You can choose how long the machine is idle (from 00 to 99
minutes) before it drops into sleep mode.  The timer automatically resets
when the machine receives a fax or PC data, or makes a copy. The default
setting is 0 minutes.
1For the FAX, press Function, 1, 5.
For the MFC, press 
Function, 1, 1, 5.
2Use the Dial pad to enter the amount of time the machine is idle before it
drops into sleep mode...