Brother Mfc 8600 12ppm 600dpi Multifunction Laser Fax Printe Owners Manual

17 - 27TROUBLESHOOTING AND ROUTINE MAINTENANCE
Follow these steps to replace the drum unit:
1Open the front cover.
2Remove the old drum unit.                   
Place the drum unit on a drop
cloth or disposable
paper to avoid scattering toner.
3Hold down the lock lever on the          
Lock
Lever
right and pull the toner cartridge
out of the drum unit assembly.
(See Replacing the Toner
Cartridge, page 17-23.)
Discard the used drum unit according to local regulations.  If you are not
sure of them, call...

17 - 28TROUBLESHOOTING AND ROUTINE MAINTENANCE 

18 - 1USING BROTHER MACHINE WITH YOUR APPLE IMAC
18 18
For USB equipped Apple New Power
Macintosh G3 or iMac with Mac OS 8.5/8.6
This chapter is for the MFC 8300. If you have a MFC 8600 or MFC 8700,
please see the Multi-Function Center Software Manual.
The connection, installation and operation instructions are available on
the bundled CD-ROM for your USB equipped Apple Macintosh or iMac
with Mac OS 8.5/8.6.
1Set up your MFC and make sure that it is working properly.
2Unplug the MFCÕs AC power cord and...

18 - 2USING BROTHER MACHINE WITH YOUR APPLE IMAC
6Click Install MFC Print Driver to begin the installation and follow the
instructions on the screen.
7After you have installed the Driver, click View On-Line Documentation
for operation instructions.
Restart your Macintosh/iMac so it recognizes the new drivers. 

SPECIFICATIONSS - 1
Specifications
Product Description
Six performance modes are available for the 6in1 model MFC8600 and
MFC 8700: Fax, Printer, Copier, Scanner, PC Fax and Video Capture.
The MFC 8300 is a 3in1 model:  Fax, Printer, Copier.
The FAX 4750 and FAX 5750 are a plain paper fax models.
Fax Specifications
Coding SystemMH/MR/MMR/JBIG: FAX 5750 and
MFC 8700
MH/MR/MMR: FAX 4750,
MFC 8300 and
MFC 8600
Modem Speed33600-2400 bps;
Automatic Fallback: FAX 5750
14400-2400 bps;
Automatic Fallback: FAX...

SPECIFICATIONSS - 2
Printer Specifications
EmulationBrother Printing System for Windows¨ and emulation mode
of HP LaserJet IIP (PCL level 4, only for MFC models)
Printer DriverWindows
¨ 3.1x, Windows¨ 95/98 and Windows NT¨
Workstation Version 4.0 driver supporting Brother Native
Compression mode and bi-directional capability
InterfaceBi-directional parallel (IEEE-1284);
USB (Universal Serial Bus)
Interface Using Windows
¨ 98 Only:
(MFC 8300, MFC 8600 and MFC 8700 only)
Memory Capacity4 MB:  FAX 4750, FAX...

SPECIFICATIONSS - 3
Electrical and Environment
Temperature(Allowable) 50 - 90.5° F (10 - 32.5° C)
(Storage) 32 - 104° F (0 - 40° C)
Warm-UpMax. 45 seconds at 73.4° F (23° C)
First Print15 seconds (using Letter size paper in paper cassette)
Power Source120V AC 50/60Hz (U.S.A, Canadian Version Only)
Power ConsumptionOperating (Copying); 850 W or less (25° C)
Sleep Mode: 9 W or less
Stand by: 30 W or less (25° C)
NoiseOperating: 50 dB A or less
Stand by: 39 dB A or less
HumidityOperating: 20 to 80% (without...

SPECIFICATIONSS - 4
Parallel Interface Specifications
Interface Connector Printer Side: Amphenol FCN-685J036-L/X or equivalent
A shielded cable should be used.
Pin Assignment
Pin No. Signal Direction Pin No. Signal Direction
1 DATA STROBEInput 19 0V(S.G.) -
2 DATA 1 Input 20 0V(S.G.) -
3 DTAT 2 Input 21 0V(S.G.) -
4 DATA 3 Input 22 0V(S.G.) -
5 DATA 4 Input 23 0V(S.G.) -
6 DATA 5 Input 24 0V(S.G.) -
7 DATA 6 Input 25 0V(S.G.) -
8 DATA 7 Input 26 0V(S.G.) -
9 DATA 8 Input 27 0V(S.G.) -
10 ACKNLGOutput 28...

SPECIFICATIONSS - 5
Symbol Sets/Character Sets
*HP mode
¥ ISO14 JIS ASCII ¥ Roman 8
¥ ISO57 Chinese ¥ ISO Latin 1
¥ ISO11 Swedish (ECMA-94)
¥ HP Spanish ¥ ISO60 Norwegian 1
¥ ISO17 Spanish ¥ ISO61 Norwegian 2
¥ ISO10 Swedish ¥ ISO4 UK
¥ ISO16 Portuguese ¥ ISO25 French
¥ ISO84 Portuguese ¥ ISO69 French
¥ ISO85 Spanish ¥ HP German
¥ PC-8 ¥ ISO21 German
¥ PC-8 D/N ¥ ISO15 Italian
¥ PC-8 Turkish ¥ ISO6 ASCII
¥ PC-850 ¥ Legal
¥ PC-852 ¥ ISO2 IRV
¥ PC-860 ¥ PC-863
¥ PC-865
If you want to know which characters...

SPECIFICATIONSS - 6
The following table shows characters available only in the corresponding
character set. The numbers at the top of the table are code values with
which characters are to be replaced in the Roman 8 character set. For
other characters, see character set of Roman 8.