Brother Mfc 8600 12ppm 600dpi Multifunction Laser Fax Printe Owners Manual

12 - 3SETUP BROTHER MACHINE WITH PC
Connecting Brother Machine to PC
with a USB Cable
(For Using Windows¨ 98 Only)
A USB cable is not included with your MFC 8300.  Before you can set up
the USB interface, please purchase a standard USB cable.  Or, to set up
the parallel interface instead, please see ÒConnecting Brother Machine to
PC with Bundled Parallel CableÓ on page 12-9.
1After you have set up the MFC and checked that it is working properly,
make sure the MFC is turned on and the PC is turned off....

12 - 4SETUP BROTHER MACHINE WITH PC
4Select [Recommended]
and click Next.
Installing Brother Printer Driver Using USB Cable
1Insert the Printer driver CD-ROM.
2Select Specify a location
and remove the other
check marks, then click
Browse to locate the file.
3Double-click on the CD
icon and click on the
Win98usb folder, then
click OK. 

12 - 5SETUP BROTHER MACHINE WITH PC
4Click Next.
5Select [Recommended]
and click Next.
6Confirm the choice is
Brother MFL Pro
Printer II and click
Next. 

12 - 6SETUP BROTHER MACHINE WITH PC
7Select BRUSB:   USB
Printer Port and click
Next.
8Type Brother MFL Pro
Printer II as the name of
printer and click Next.
9Select Ye s
[Recommended] and click
Finish. 

12 - 7SETUP BROTHER MACHINE WITH PC
10After completing the test
print, click Ye s.
11Click Finish. This
completes the installation
of the Printer and its USB
driver. 

12 - 8SETUP BROTHER MACHINE WITH PC
Manually Installing True Type Fonts
For the MFC 8300, you must install the True Type Fonts manually,
following the steps bellow. For the MFC 8600 and MFC 8700, you can
install the True Type Fonts during the initial Windows
¨ Printer Driver
installation, or manually at a later time.
True Type Fonts are the fonts that are used in the Windows
¨ operating
systems. If you install the Brother True Type Fonts, more types of fonts
will be available for Windows
¨ applications....

12 - 9SETUP BROTHER MACHINE WITH PC
Connecting Brother Machine to PC
With Bundled Parallel Cable
You must connect the Brother machine to your PC with the included
bi-directional IEEE-1284 compliant parallel cable.
1Make sure to unplug the machineÕs power cord from the electrical outlet
before connecting the parallel interface cable.
Also, make sure the PC is turned off and unplugged from the electrical
power before you connect the interface cable.
2Connect the parallel interface cable to the parallel...

12 - 10SETUP BROTHER MACHINE WITH PC
Installing Brother Printer Driver
(For Parallel Interface)
(For Windows¨ 95/98 and Windows NT¨ Workstation
Version 4.0 Only)
1Insert the Brother CD-ROM into your CD-ROM drive.
2Enter the command for your version of Windows¨, if needed.
After you insert the Brother CD-ROM, you must type the appropriate
command for your version of Windows
¨:
If you are using Windows
¨ 95/98 or Windows NT¨ Workstation Version
4.0, the Software Installation program appears automatically...

12 - 11SETUP BROTHER MACHINE WITH PC
A window appears listing the options:
       
For each application you install, click on that name in the Software
Installation window and follow the instructions on the screen. The last
step will be to restart Windows
¨ and access the Software Installation
window again to install the next application.
3Click on ÒInstall MFC Printer DriverÓ and follow the prompts on the
screen. 

12 - 12SETUP BROTHER MACHINE WITH PC