Brother MFC 8460N User Manual

Section V
AppendixesV
Safety and Legal88
Options99
Troubleshooting and routine maintenance102
Menu and Features140
Specifications159
Glossary171
 

88
A
Choosing a locationA
Place your machine on a flat, stable surface that is free of vibration and shocks. Put the machine 
near a telephone wall jack and a standard, grounded AC power outlet. Choose a location where 
the temperature remains between 50° F and 90.5° F (10° C and 32.5° C) and the humidity is 
between 20% to 80% (without condensation).
CAUTION 
Avoid placing your machine in a high-traffic area.
  
Do not place the machine near heaters, air conditioners, refrigerators, water, chemicals or...

Safety and Legal
89
To use the machine safelyA
Please keep these instructions for later reference and read them before attempting any 
maintenance.
WARNING
There are high voltage electrodes inside the 
machine. Before you clean the inside of the 
machine, make sure you have unplugged the 
telephone line cord first and then the power cord 
from the AC power outlet.
 
Do not handle the plug with wet hands. Doing this 
might cause an electrical shock.
Always make sure the plug is fully inserted.
 
After you...

90
To prevent injuries, be careful not to put your 
hands on the edge of the machine under the 
document cover.
 
To prevent injuries, be careful not to put your 
fingers in the area shown in the illustrations.
 
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner 
dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the 
toner dust with a dry, lint-free cloth and dispose of it according to local regulations.
When you move the...

Safety and Legal
91
CAUTION 
Lightning and power surges can damage this product! We recommend that you use a quality 
surge protection device on the AC power line and on the telephone line, or unplug the cords 
during a lightning storm.
 
WARNING 
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always be followed to 
reduce the risk of fire, electric shock and injury to people, including the following:
1 Do not use this product near water, for example,...

92
Important InformationA
Standard telephone and FCC NoticesA
These notices are in effect on models sold and used in the United States only.
When programming emergency numbers or making test calls to emergency numbers:
„Remain on the line and briefly explain to the dispatcher the reason for the call before hanging 
up.
„Perform these activities in the off-peak hours, such as early morning or late evening.
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the 
ACTA. On...

Safety and Legal
93
If your home has specially wired alarm equipment connected to the telephone line, ensure the 
installation of this equipment does not disable your alarm equipment. If you have questions about 
what will disable alarm equipment, call your telephone company or a qualified installer.
If you are not able to solve a problem with your machine, call Brother Customer Service. (See 
Brother numbers on page i.)
WARNING 
For protection against the risk of electrical shock, always disconnect all...

94
Federal Communications Commission (FCC) 
Declaration of Conformity (USA only)
declares, that the products
Product Name: MFC-8460N, MFC-8660DN, MFC-8670DN, MFC-8860DN, MFC-8870DW
comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the...

Safety and Legal
95
Industry Canada Compliance Statement (Canada only) A
This Class B digital apparatus complies with Canadian ICES–003. 
Cet appareil numérique de la classe B est conforme à la norme NMB–003 du Canada.
Disconnect deviceA
This product must be installed near an electrical jack that is easily accessible. In case of 
emergencies, you must disconnect the power cord from the electrical jack to shut off power 
completely.
LAN connection A
CAUTION 
Do not connect this product to a LAN connection...

96
FDA regulationsA
U.S. Food and Drug Administration (FDA) has implemented regulations for laser products 
manufactured on and after August 2, 1976. Compliance is mandatory for products marketed in the 
United States. The following label on the back of the machine indicates compliance with the FDA 
regulations and must be attached to laser products marketed in the United States.
WARNING 
Use of controls, adjustments or performance of procedures other than those specified in this 
manual may result in...