Brother Mfc 790cw User Manual

PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive115
13
Color Enhancement (True2Life®)13
You can turn on the color enhancement 
(True2Life
®) feature to print more vivid 
images. Printing time will be slower.
aPress  Print Setting .
bPress aor b to display  True2Life .
cPress True2Life .
dDo one of the following:
„ If you want to customize the White 
Balance, Sharpness or Color 
Density, press  On, and then go to 
step e.
„ If you do not want to customize, 
press  Off....

Chapter 13
116
Cropping13
If your photo is too long or wide to fit the 
available space on your chosen layout, part 
of the image will automatically be cropped.
The factory setting is  On. If you want to print 
the whole image, turn this setting to  Off.
If you are also using the Borderless setting, 
turn the Borderless to  Off. (See  Borderless 
printing  on page 116.)
aPress Print Setting .
bPress aor b to display  Cropping .
cPress Cropping .
dPress Off (or On).
eIf you do not want to change...

PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive117
13
Setting your changes as the 
new default13
You can save the print settings you use most 
often by setting them as the default settings. 
These settings will stay until you change 
them again.
aPress your new setting.
Repeat this step for each setting you 
want to change.
bAfter changing the last setting, press 
a
or b to choose  Set New Default .
cPress Set New Default .
dPress Yes to confirm.
ePress  Stop/Exit ....

Chapter 13
118
aInsert a CompactFlash®, Memory 
Stick®, Memory Stick Pro™, SD, SDHC, 
xD-Picture Card™ or USB Flash 
memory drive into your machine.
CAUTION 
DO NOT take out the memory card or USB 
Flash memory drive while  Photo Capture 
is blinking to avoid damaging the card, USB 
Flash memory drive or data stored on the 
card.
 
bLoad your document.
cPress ( Scan).
dPress  Scan to Media .
eDo one of the following:
„ To change the quality, press  dor c to 
display  Quality . 
Press  Quality  and...

PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive119
13
How to set a new default13
You can set your own default setting.
aPress (Scan).
bPress  Scan to Media .
cPressdor c to display 
Set New Default .
dPress Set New Default .
ePress Yes to confirm.
fPress  Stop/Exit .
How to reset to the factory 
settings13
You can restore all the settings you have 
changed to the factory settings.
aPress ( Scan).
bPress  Scan to Media .
cPress dor c to choose 
Factory Reset .
dPress...

120
14
Printing photos 
directly from a 
PictBridge camera
14
 
Your Brother machine supports the 
PictBridge standard, allowing you to connect 
to and print photos directly from any 
PictBridge compatible digital camera.
If your camera is using the USB Mass 
Storage standard, you can also print photos 
from a digital camera without PictBridge.(See 
Printing photos directly from a digital camera 
(without PictBridge)  on page 122.)
PictBridge requirements14
To avoid errors, remember the following...

Printing photos from a camera121
14
„When your camera does not have any 
menu selections, this setting is also used.
„ The names and availability of each setting 
depends on the specification of your 
camera.
Please refer to the documentation supplied 
with your camera for more detailed 
information on changing PictBridge settings.
Printing Images14
Note
Remove any memory cards or USB Flash 
memory drive from the machine before 
connecting a digital camera.
 
aMake sure that your camera is turned 
off....

Chapter 14
122
Printing photos 
directly from a digital 
camera (without 
PictBridge)
14
If your camera is using the USB Mass 
Storage standard, you can connect your 
camera in storage mode. This enables you to 
print photos from your camera.
(If you would like to print photos in PictBridge 
mode, see  Printing photos directly from a 
PictBridge camera  on page 120.) 
Note
The name, availability and operation differ 
among digital cameras. Please refer to the 
documentation supplied with your camera...

Printing photos from a camera123
14
Understanding the 
Error Messages
14
Once you are familiar with the types of errors 
that can occur while you are printing from a 
camera, you can easily identify and 
troubleshoot any problems.„ Out of Memory
This message will appear if you are 
working with images that are too large for 
the machines memory.
„ Unusable Device
This message will appear if you connect a 
camera that is not using the USB Mass 
Storage standard. This message will also 
appear if you...

124
15
Printing photos with 
Bluetooth
® wireless 
technology
15
 
Your Brother machine supports  Bluetooth® 
wireless technology for printing photos.
Bluetooth
® wireless technology enables short 
range wireless communication between your 
machine and  Bluetooth
® wireless technology 
enabled devices for printing photos.
The requirements for using 
Bluetooth
® wireless 
technology15
To avoid errors, remember the following 
points:
„ The image file extension must be .JPG or 
.VNT (other image file...