Brother HL 6050D User Manual

2 - 11   DRIVER AND SOFTWARE
Device Settings tab 
Select the options you have installed.
 

DRIVER AND SOFTWARE   2 - 12
Layout tab
You can change the layout setting by selecting the settings for Orientation, Print on Both Sides 
(Duplex), Page Order and Page Per Sheet.
If you are using Windows NT® 4.0, Windows® 2000 or XP, you can access the Layout tab by 
clicking Printing Preferences... in the General tab of the Brother HL-6050D/DN BR-Script3 
Properties screen.
 

2 - 13   DRIVER AND SOFTWARE
Paper / Quality tab
Select the Paper Source.
 

DRIVER AND SOFTWARE   2 - 14
Advanced options
1Select the Paper Size and Copy Count.
2Set the Print Quality, Scaling and TrueType Font settings.
3You can change settings by selecting the setting in the Printer Features list:
■Media Type
■HRC
■Toner Save
■Sleep Time
■BR-Script Level
HRC
This option allows you to change the HRC setting on your Brother HL-6050 series printer. HRC is a 
special function that offers improved print quality of characters and graphics that conventional laser 
printers cannot...

2 - 15   DRIVER AND SOFTWARE
Toner Save
You can save running costs by turning on the  Toner Save, which reduces the print density.
Sleep Time
When the printer does not receive data for a certain period of time (timeout), it enters sleep mode. Sleep 
mode acts as though the printer was turned off. The default timeout is 30 minutes. When  Intelligent 
Sleep Mode  is selected, it is automatically adjusted to the most suitable time-out setting depending on 
the frequency of your printer use. While the...

DRIVER AND SOFTWARE   2 - 16
For Macintosh® 
This printer supports Mac OS® 8.6 to 9.2 and Mac OS® X 10.1, 10.2 or greater.
You can download the latest driver by accessing the Brother Solutions Center at 
http://solutions.brother.com
Page setup
You can set the Paper size, Orientation and Scale.
Layout
Set the Layout, Pages per Sheet and other settings.
The screens in this section are from Mac OS® X 10.1
The screens on your Macintosh
® will vary depending on your operating system.
 

2 - 17   DRIVER AND SOFTWARE
Specific settings
You can change settings by selecting the setting in the Printer Features list:
■Media Type
■Resolution
■HRC
■Toner Save
■Sleep Time
Resolution
You can change the resolution as follows:
■300 dpi
■600 dpi
■1200 dpi
HRC
This option allows you to change the HRC setting on your Brother HL-6050 series printer. HRC is a 
special function that offers improved print quality of characters and graphics that conventional laser 
printers cannot attain with resolutions of...

DRIVER AND SOFTWARE   2 - 18
Sleep Time
When the printer does not receive data for a certain period of time (timeout), it enters sleep mode. Sleep 
mode acts as though the printer was turned off. The default timeout is 30 minutes. When  Intelligent 
Sleep Mode  is selected, it is automatically adjusted to the most suitable time-out setting depending on 
the frequency of your printer use. While the printer is in sleep mode, the light on the display is off, but 
the printer can still receive data from the...

2 - 19   DRIVER AND SOFTWARE
Software (Windows® users)
Software for Networks
BRAdmin Professional
The BRAdmin Professional is a utility for managing your Brother network enabled printers that are 
running under Windows® 95/98/Me, Windows NT® 4.0 and Windows® 2000/XP. 
It allows you to easily configure and check the status of your printer on the network.
Driver Deployment Wizard
This installer includes the Windows® PCL printer driver (standard printer driver) and Brother network port 
driver (LPR and...

DRIVER AND SOFTWARE   2 - 20
Automatic emulation selection
This printer has an automatic emulation selection feature. When the printer receives data from the 
computer, it automatically chooses the emulation mode. The default factory setting is ON.
The printer can choose from the following combinations:
Automatic interface selection
This printer has an automatic interface selection feature. When the printer receives data from the 
computer, it automatically selects the IEEE 1284 Parallel or the USB...