Brother DCP 8025D User Manual

NETWORK SCANNING (WINDOWS® 98/98SE/ME/2000 PROFESSIONAL AND XP ONLY) 12 - 2
Right-click Scanner Device icon and select properties to view 
the Network Scanner Properties dialog box.
2Click the Network Setting tab in the dialog box and select a 
method to specify the DCP as a Network scanner for your PC.
<
 

12 - 3   NETWORK SCANNING (WINDOWS® 98/98SE/ME/2000 PROFESSIONAL AND XP ONLY)
Specify your DCP by address
Enter the actual IP address of the DCP in the IP Address field.
Click Apply and then OK.
Specify your DCP by Name
Enter the DCP Node name in the Node Name field.
Click Apply and then OK.
Search from a list of available device
Click Browse and select the appropriate device you want to use.
Click OK.
Click Apply and then OK.
 

NETWORK SCANNING (WINDOWS® 98/98SE/ME/2000 PROFESSIONAL AND XP ONLY) 12 - 4
3Click the Scan To Button tab in the dialog box and enter your 
PC Name in the Display Name field. The DCPs LCD displays 
the Name you enter. Default setting is your PC Name. You can 
enter a name if you like.
4You can avoid receiving unwanted documents by setting a 
4-digit PIN Number. Enter your PIN Number in the PIN Number 
and Retype PIN Number field. To send data to a PC protected 
by a PIN Number, the LCD prompts to enter...

12 - 5   NETWORK SCANNING (WINDOWS® 98/98SE/ME/2000 PROFESSIONAL AND XP ONLY)
Using the Scan key
Scan to E-mail (PC)
When you select Scan to E-mail (PC) your original will be scanned 
and sent directly to the PC you designated on your network. The 
Brother SmartUI will activate the default E-mail application on the 
designated PC for addressing to the recipient. You can scan a black 
and white or color original and it will be sent with the E-mail from the 
PC as an attachment. 
You can change the 
Scan...

NETWORK SCANNING (WINDOWS® 98/98SE/ME/2000 PROFESSIONAL AND XP ONLY) 12 - 6
Scan to Image
When you select Scan to Image your original will be scanned and 
sent directly to the PC you designated on your network. The Brother 
SmartUI will activate the default graphics application on the 
designated PC. You can change the 
Scan configuration. (For 
Windows® 98/Me/2000: See Scan to Image
 on page 9-14.) (For 
Windows® XP: See Hardware Section: Changing the Scan to button 
configuration on page 10-5 to...

12 - 7   NETWORK SCANNING (WINDOWS® 98/98SE/ME/2000 PROFESSIONAL AND XP ONLY)
Scan to OCR
When you select Scan to OCR your original will be scanned and sent 
directly to the PC you designated on your network. The Brother 
SmartUI will activate ScanSoft
® TextBridge® and convert your 
original into text for viewing and editing from a word processing 
application on the designated PC. You can change the 
Scan 
configuration.
(For Windows
® 98/Me/2000: See Scan to OCR (Word Processor) on 
page 9-12 to...

NETWORK SCANNING (WINDOWS® 98/98SE/ME/2000 PROFESSIONAL AND XP ONLY) 12 - 8
Scan to File
When you select Scan to File you can scan a black and white or color 
original and send it directly to a PC you designate on your network. 
The file will be saved in the folder and file format that you have 
configured in the Brother SmartUI on the designated PC. You can 
change the 
Scan configuration.
(For Windows
® 98/Me/2000: See Scan to File on page 9-8 to 9-9.) 
(For Windows® XP: See Hardware Section: Changing...

13 - 1   IMPORTANT INFORMATION
13
Federal Communications Commission (FCC) 
Declaration of Conformity (USA only)
declares, that the products
Product Name: DCP-8020, DCP-8025D
comply with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful 
interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits...

IMPORTANT INFORMATION   13 - 2
WARNING
■This DCP has been certified to comply with FCC standards, 
which are applied to the USA only. A grounded plug should 
be plugged into a grounded AC outlet after checking the 
rating of the local power supply for the DCP to operate 
properly and safely.
■For protection against the risk of electrical shock, always 
disconnect all cables from the wall outlet before servicing, 
modifying or installing the equipment.
Important
Changes or modifications not expressly...

13 - 3   IMPORTANT INFORMATION
Industry Canada Compliance Statement 
(Canada only) 
This Class B digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de la classe B est conforme à la norme 
NMB-003 du Canada.
For your safety
To ensure safe operation the three-pin plug supplied must be 
inserted only into a standard three-pin power point which is 
effectively grounded through the standard wiring.
The fact that the equipment operates satisfactorily does not imply 
that the power is...