Brother DCP 8025D User Manual

USING THE WINDOWS®-BASED BROTHER SMARTUI CONTROL CENTER (FOR WINDOWS® XP) 10 - 26
Select the number of Pages Per Sheet from the Scaling selections. 
As an example to configure the section Copy button to copy two 
pages to one you must select 2 in 1.
You must configure each of the copy buttons before they can be 
used.
 

10 - 27   USING THE WINDOWS®-BASED BROTHER SMARTUI CONTROL CENTER (FOR WINDOWS® XP)
Custom: User-defined buttons
There are up to three Custom buttons on the Brother SmartUI 
Control Center. (NOTE: The number of Custom buttons depends on 
which Brother model you purchased.) You can set your own 
preferences and configuration to fit your required application.
To configure a Custom Button right click on the button and then click 
Configuration. The configuration window will appear. You have four 
function...

USING THE WINDOWS®-BASED BROTHER SMARTUI CONTROL CENTER (FOR WINDOWS® XP) 10 - 28
2. Select Configuration for the Scan Type.
To configure the scan operation click on the Configuration Tab. 
Depending upon which Scan Type button you selected you will see 
a different Configuration Tab list of settings.
Application:
Select the destination application program from the pull down list.
Click on Link Preferences to set the Send to options. You can select 
the application from the scroll menu on the left.
 

10 - 29   USING THE WINDOWS®-BASED BROTHER SMARTUI CONTROL CENTER (FOR WINDOWS® XP)
File:
Select the file format from the Format pull down list. You can either 
send the file to the default PaperPort directory or select your own 
destination directory by selecting Other Folder. Use the Browse 
button to select the destination directory.
 

USING THE WINDOWS®-BASED BROTHER SMARTUI CONTROL CENTER (FOR WINDOWS® XP) 10 - 30
OCR:
Select the destination word processing application program from the 
pull down list.
Click on Link Preferences and select the destination Application from 
the scroll menu on the left. Select the File Type from the File Type 
pull down list. You can also choose another OCR application from 
the OCR pull down list if another is installed on you system. 
ScanSoft
® TextBridge® is installed as part of the PaperPort 8.0...

10 - 31   USING THE WINDOWS®-BASED BROTHER SMARTUI CONTROL CENTER (FOR WINDOWS® XP)
E-mail:
Select the destination E-mail application program from the pull down 
list.
Click on the Link Preferences button to configure the Send To 
E-mail options. You can select the File type and Quick Send E-mail 
address list.
 

USING THE WINDOWS®-BASED BROTHER SMARTUI CONTROL CENTER (FOR WINDOWS® XP) 10 - 32
3. Select Scan Settings.
You can select the scanner settings from each of the Scan Type 
options for the Custom buttons. You have the option to select Color 
Mode, Resolution, Paper Size and Brightness and Contrast settings.
 

11 - 1   USING YOUR DCP WITH A MACINTOSH®
11
mb 
Setting up your USB-equipped Apple® 
Macintosh
® 
The features supported by the DCP will depend on the operating 
system you are using. The chart below shows which features are 
supported.
*1 For Mac OS X 10.2 users, please upgrade to Mac OS X 10.2.1 or 
greater. (For the latest information for Mac OS X, please visit at: 
http://solutions.brother.com)
Using your DCP with a 
Macintosh
®
Before you can connect the DCP to your Macintosh®, you must 
buy a USB...

USING YOUR DCP WITH A MACINTOSH®   11 - 2
Using the Brother printer driver with 
your Apple
® Macintosh® (OS 8.6 - 9.2)
To select a Printer:
1Open the Chooser from the Apple menu.
2Click the Brother Laser icon. On the right side of the Chooser 
window, click the printer you want to print to. Close the 
Chooser.
To print a document:
1From the application software such as Presto! PageManager®, 
click File menu and select Page Setup. You can change the 
settings for Paper Size, Orientation, and Scaling, and...

11 - 3   USING YOUR DCP WITH A MACINTOSH®
2From application software such as Presto! PageManager®, click 
File menu and select Print. Click Print to start printing.
 If you want to change Copies, Pages, Resolution, Paper Source 
and Media Type, select your settings before clicking Print.
Device Options allows you to select Duplex.
Automatic Duplex is only available with the DCP-8025D.