Brother DCP 7065DN User Manual

How to scan to a computer
27
6
Scanning using a 
scanner driver
6
For more information, see Scanning a 
document using the TWAIN driver or 
Scanning a document using the WIA driver in 
the Software Users Guide.
aStart a scanning application and click 
the Scan button.
bAdjust the settings such as Resolution, 
Brightness and Scan Type in the 
Scanner Setup dialog box.
cClick Start or Scan to begin scanning.
 

28
A
Replacing the consumable itemsA
The machine will indicate when it is time to replace the consumable items. (See Replacing the 
toner cartridge on page 29 and Replacing the drum unit on page 35.) To avoid any inconvenience, 
you may want to buy spare consumable items before the machine stops printing.
Note
• Go to http://www.brother.com/original/index.html for instructions on how to return your used 
consumable items to the Brother collection program. If you choose not to return your used...

Routine maintenance
29
A
Replacing the toner cartridgeA
Order No. For the Order No. of toner 
cartridges, see Replacing the consumable 
items on page 28.
The Standard toner cartridge can print 
approximately 1,200 pages
1. The High Yield 
toner cartridge can print approximately 2,600 
pages
1. Actual page count will vary 
depending on your average type of 
document. When a toner cartridge is running 
low, the LCD shows Toner Low.
The toner cartridge that comes supplied with 
the machine is a Starter...

30
Note
To force the machine to continue printing 
after the LCD shows Replace Toner, 
set the machine to Continue mode (Press 
Menu, press a or b to choose 1.General 
Setup and press OK, press a or b to 
choose 4.Replace Toner, and press 
OK, press a or b to choose Continue and 
press OK). The machine will continue 
printing until the LCD shows Toner 
Ended. (For details about the Toner 
settings, see Toner Settings in Chapter 1 
of the Advanced Users Guide.)
 
Toner EndedA
 
Toner Ended
 
The machine...

Routine maintenance
31
A
cTake out the drum unit and toner 
cartridge assembly.
 
dPush down the green lock lever and take 
the toner cartridge out of the drum unit.
 
WARNING 
DO NOT put a toner cartridge into a fire. It 
could explode, resulting in injuries.
 
 
DO NOT use cleaning materials that 
contain ammonia, alcohol, any type of 
spray or any type of flammable substance 
to clean the inside or outside of the 
machine. Doing this may cause a fire or 
electrical shock. 
See To use the product...

32
 
 
Note
• Be sure to seal up the toner cartridge 
tightly in a suitable bag so that toner 
powder does not spill out of the cartridge.
• Go to http://www.brother.com/original/
index.html for instructions on how to return 
your used consumable items to the 
Brother collection program. If you choose 
not to return your used consumable, 
please discard the used consumable 
according to local regulations, keeping it 
separate from domestic waste. If you have 
questions, call your local waste disposal...

Routine maintenance
33
A
gPut the new toner cartridge firmly into 
the drum unit until you hear it lock into 
place. If you put it in properly, the green 
lock lever will lift automatically.
 
hClean the primary corona wire inside the 
drum unit by gently sliding the green tab 
from left to right and right to left several 
times.
 
Note
Be sure to return the tab to the home 
position (a) (1). If you do not, printed 
pages may have a vertical stripe.
 
iPut the drum unit and toner cartridge 
assembly back...

34
Note
After replacing the toner cartridge, DO 
NOT turn off the machines power switch 
or open the front cover until the LCD 
returns to Ready mode.
 
Cleaning the corona wireA
If you have print quality problems, clean the 
corona wire as follows:
aOpen the front cover and leave the 
machine turned on for 10 minutes to 
cool down.
 
WARNING 
HOT SURFACE
After you have just used the machine, some 
internal parts of the machine will be 
extremely hot. When you open the front or 
back cover (back output...

Routine maintenance
35
A
 
To prevent damage to the machine caused 
by static electricity, DO NOT touch the 
electrodes shown in the illustration.
 
 
cClean the corona wire inside the drum 
unit by gently sliding the green tab from 
left to right and right to left several times.
 
Note
Be sure to return the tab to the home 
position (a) (1). If you do not, printed 
pages may have a vertical stripe.
 
dPut the drum unit and toner cartridge 
assembly back into the machine. Close 
the front cover....

36
• Printing with a non-Brother drum unit may 
reduce not only the print quality but also 
the quality and life of the machine itself. 
Warranty coverage does not apply to 
problems caused by the use of a non-
Brother drum unit.
 
Drum ErrorA
 
Drum Error
 
The corona wire has become dirty. Clean the 
corona wire in the drum unit. (See Cleaning 
the corona wire on page 34.)
If you cleaned the corona wire and Drum 
Error was not cleared, replace the drum unit 
with a new one.
Replace DrumA
 
Replace...