Brother DCP 7057R User Manual

Control panel setup 
26
5
IP Address5
This field displays the current IP address of the machine. If you have chosen a Boot Method of Static, 
enter the IP address that you wish to assign to the machine (check with your network administrator for the IP 
address to use). If you have chosen a method other than Static, the machine will attempt to determine its 
IP address using the DHCP or BOOTP protocols. The default IP address of your machine will probably be 
incompatible with the IP address numbering...

Control panel setup 
27
5
Secondary WINS Server IP Address5
This field specifies the IP address of the secondary WINS server. It is used as a backup to the Primary WINS 
server address. If the Primary server is unavailable, the machine still can register itself with a secondary 
server. If set to a non-zero value, the machine will contact this server to register its name with the Windows
® 
Internet Name Service. If you have a primary WINS server, but no secondary WINS server, simply leave this 
field...

Control panel setup 
28
5
Status (For DCP-7065DN, MFC-7360N, MFC-7460DN and MFC-7860DN)/
Wired Status (For HL-2280DW, DCP-7070DW and MFC-7860DW)5
This field displays the current wired network status.
Setup Wizard (wireless network only)5
The Setup Wizard guides you through the wireless network configuration. (For more information, see the 
Quick Setup Guide or Using the Setup Wizard from the control panel on page 16.)
WPS or AOSS™ (wireless network only)5
If your WLAN access point/router supports either...

Control panel setup 
29
5
MAC Address5
The MAC address is a unique number assigned for the machine’s network interface. You can check your 
machine’s MAC address from the control panel.
Set to Default (For HL-2280DW, DCP-7070DW and MFC-7860DW)5
The Set to Default allows you to reset each wired or wireless settings to the factory default. If you want 
to reset both wired and wireless settings, see Reset the network settings to the factory default on page 36.
Wired Enable (For HL-2280DW, DCP-7070DW and...

Control panel setup 
30
5
 5
SMTP Port
This field displays the SMTP port number (for outgoing E-mails) on your network.
 5
Auth. for SMTP
You can specify the security method for E-mail notification. (For details on the security methods for E-mail 
notification, see Sending an E-mail securely on page 66.)
 5
POP3 Server
This field displays the node name or IP address of the POP3 server (incoming E-mail server) used by the 
Brother machine. This address is necessary for the Internet fax features to...

Control panel setup 
31
5
 5
Header
This selection allows the contents of the mail header to be printed when the received message is printed.
 5
Del Error Mail
When set to On, the machine automatically deletes error mails that the machine cannot receive from the POP 
server.
 5
Notification
The notification feature allows a confirmation of receipt message to be transmitted to the sending station 
when the Internet Fax has been received.
This feature only works on Internet Fax machines that support the...

Control panel setup 
32
5
 5
Relay Domain
You can register the Domain Names (Max. 10) that are allowed to request a Relay Broadcast.
 5
Relay Report
A Relay Broadcast Report can be printed at the machine that will act as a Relay Station for all Relay 
Broadcasts.
Its primary function is to print reports of any relayed broadcasts that have been sent through the machine. 
Please note: In order to use this function, you must assign the relay domain in the “Trusted Domains” section 
of the Relay function...

Control panel setup 
33
5 Fax to Server (For MFC-7460DN, MFC-7860DN and MFC-7860DW: available as a 
download)5
The Fax to Server feature allows the machine to scan a document and send it over the network to a separate 
fax server. The document will then be sent from the server as fax data to the destination fax number over 
standard phone lines. When the Fax to Server feature is set to On all automatic fax transmissions from the 
machine will be sent to the fax server for fax transmission. You can...

Control panel setup 
34
5
hPress a or b to choose Suffix.
Press OK.
iEnter the suffix using the dial pad.
jPress OK.
kPress Stop/Exit.
Note
You can enter the prefix and suffix address using up to a total of 40 characters.
 
How to operate Fax to Server5
aPlace the document in the ADF or on the scanner glass.
bEnter the fax number.
cPress Start.
dThe machine will send the message over a TCP/IP network to the fax server.
 

Control panel setup 
35
5
Time Zone5
This field displays your country time zone. The time shown is the time difference between your country and 
Greenwich Mean Time. For example, the Time Zone for Eastern Time in the USA and Canada is UTC-05:00.
aPress Menu.
bPress a or b to choose Initial Setup.
Press OK.
cPress a or b to choose Date&Time.
Press OK.
dPress a or b to choose Time Zone.
Press OK.
ePress a or b to choose your time zone.
Press OK.
fPress Stop/Exit.
Windows® Time Zone setting5
You can see the...