Brother DCP 7030 User Manual

Safety and legal
35
A
Important informationA
Safety precautionsA
Please read these instructions before attempting any maintenance, and keep them for later 
reference. When using your equipment, follow basic safety precautions to reduce the risk of fire, 
electric shock or personal injury.
„DO NOT use this product near water, or in a damp environment.
„Avoid using this product during an electrical storm. There may be a remote risk of electric 
shock from lightning.
„We DO NOT advise using an extension...

36
WARNING 
Before cleaning the inside of the machine, unplug 
the power cord from the electrical socket.
 
DO NOT handle the plug with wet hands. Doing 
this might cause an electrical shock.
 
Always make sure the plug is fully inserted.
After you have just used the machine, some 
internal parts of the machine will be extremely hot. 
When you open the front or back cover of the 
machine, DO NOT touch the shaded parts shown 
in the illustrations.
 
To prevent injuries, be careful not to put your 
hands...

Safety and legal
37
A
 
Note
 
IEC60825-1+A2:2001 SpecificationA
This machine is a Class 1 laser product as defined in IEC60825-1+A2:2001 specifications. The 
label shown below is attached in countries where required.
Laser Diode AA
Wave length: 780 - 800 nm
Output: 10 mW max.
Laser Class: Class 3BIf moving your machine, use the handholds provided. First making sure to disconnect any 
cables.
DO NOT use any flammable substances, spray or 
organic solvent/liquids containing alcohol/ammonia 
to clean the...

38
WARNING 
Use of controls, adjustments or performance of procedures other than those specified in this 
manual may result in hazardous radiation exposure.
 
Disconnect deviceA
This product must be installed near an electrical socket that is easily accessible. In case of 
emergencies, you must disconnect the power cord from the electrical socket to shut off power 
completely.
Radio interferenceA
This product complies with EN55022 (CISPR Publication 22)/Class B. When connecting the 
machine to a...

Safety and legal
39
A
International ENERGY STAR® Compliance StatementA
The purpose of the International ENERGY STAR® Program is to promote the development and 
popularization of energy-efficient office equipment.
As an ENERGY STAR
® Partner, Brother Industries, Ltd. has determined that this product meets 
the ENERGY STAR
® guidelines for energy efficiency.
 
Important Safety InstructionsA
1 Read all of these instructions.
2 Save them for later reference.
3 Follow all warnings and instructions marked on...

40
11 DO NOT place anything on top of the power cord including this machine. DO NOT allow the 
power cord to be stepped on.
12 If an extension cord is used with this product, make sure that the total ampere ratings on the 
products plugged into the extension cord do not exceed the extension cord ampere rating.
13 DO NOT place anything in front of the machine that will block printed pages. DO NOT place 
anything in the path of printed pages.
14 DO NOT touch a document during printing.
15 Never push...

Safety and legal
41
A
Legal limitations for copyingA
It is an offence to make reproductions of certain items or documents with the intent to commit 
fraud. This memorandum is intended to be a guide rather than a complete list. we suggest you 
check with relevant legal authorities if in doubt about a particular item or document.
The following are examples of documents which should not be copied:
„Money
„Bonds or other certificates of debt
„Certificates of Deposit
„Armed Forces Service or Draft papers...

42
TrademarksA
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
Multi-Function Link is a registered trademark of Brother International Corporation.
Windows Vista is either a registered trademark or  a trademark of Microsoft Corporation in the 
United States and other countries.
Microsoft, Windows and Windows Server are register ed trademarks of Microsoft Corporation in 
the United States and/or other countries....

43
B
B
TroubleshootingB
If you think there is a problem with your machine, check the chart below and follow the 
troubleshooting tips.
Most problems can be easily resolved by yourself. If you need additional help, the Brother Solutions 
Center offers the latest FAQs and troubleshooting tips. Visit us at http://solutions.brother.com/
.
If you are having difficulty with your machineB
Check the chart below and follow the troubleshooting tips.
Troubleshooting and routine 
maintenance
B
Copy quality...

44
The machine prints unexpectedly 
or it prints garbage.„Pull out the paper tray and wait until the machine stops printing. Then turn off 
the machine’s power switch and disconnect from the power for several 
minutes. 
„Check the settings in your application to make sure it is set up to work with 
your machine.
The machine prints the first couple 
of pages correctly, then some 
pages have text missing.„Check the settings in your application to make sure that it is set up to work with 
your machine....