Brother DCP 7030 User Manual

Loading paper and documents
15
2
Labels2
The machine will print on most types of labels 
designed for use with a laser machine. Labels 
should have an adhesive that is acrylic-based 
since this material is more stable at the high 
temperatures in the fuser unit. Adhesives 
should not come in contact with any part of 
the machine, because the label stock may 
stick to the drum unit or rollers and cause 
jams and print quality problems. No adhesive 
should be exposed between the labels. 
Labels should be...

Chapter 2
16
„Documents must be from 148 to 
215.9 mm wide and from 148 to 355.6 mm 
long, and of a standard weight 80 g/m
2.
aFold out the ADF document output 
support flap (1) and the ADF support 
flap (2).
 
bFan the pages well.
cPlace your document, face up top edge 
first, in the ADF until you feel it touch the 
feed roller. 
dAdjust the paper guides (1) to fit the 
width of your document.
 
Using the scanner glass2
You can use the scanner glass to copy or 
scan pages of a book or one page at a...

17
3
3
Paper settings3
Paper type3
Set up the machine for the type of paper you 
are using. This will give you the best print 
quality.
aPress Menu.
bPress a or b to choose 1.General Setup.
Press OK.
cPress a or b to choose 1.Paper Type.
Press OK.
dPress a or b to choose Plain, Plain 
(Thick), Thick, Thicker, 
Transparency or Recycled Paper.
PressOK.
ePress Stop/Exit.
Paper size3
You can use seven sizes of paper for printing 
copies: A4, Letter,  Executive, A5, A6, B5 and 
B6. 
When you change the size...

Chapter 3
18
Ecology features3
Toner Save3
You can save toner using this feature. When 
you set Toner Save to On, print appears 
lighter. The default setting is Off.
aPress Menu.
bPress a or b to choose 1.General Setup.
Press OK.
cPress a or b to choose 4.Ecology.
Press OK.
dPress a or b to choose 1.Toner Save.
Press OK.
ePress a or b to choose On or Off.
PressOK.
fPress Stop/Exit.
Note
We do not recommend Toner Save for 
printing Photo or Greyscale images.
 
Sleep time3
Setting the sleep time reduces...

General setup
19
3
LCD contrast3
You can change the contrast to make the 
LCD look lighter or darker.
aPress Menu.
bPress a or b to choose 1.General Setup.
Press OK.
cPress a or b to choose 5.LCD Contrast.
Press OK.
dPress a to make the LCD darker. Or, 
press b to make the LCD lighter.
PressOK.
ePress Stop/Exit.
User Settings List3
You can print a list of the settings you 
programmed.
aPress Menu.
bPress a or b to choose 1.General Setup.
Press OK.
cPress a or b to choose 6.User Settings.
Press OK.
dPress...

Chapter 3
20
 

Section II
CopyII
Making copies22
 

22
4
How to copy4
Entering copy mode4
 
1 Stack/Sort1
2 Copy ratio and copy layout
3 Contrast
4Quality
5 Number of copies
1Sort is only available for the DCP-7040.
Making a single copy4
aLoad your document.
bPress Start.
Making multiple copies4
aLoad your document.
bDo one of the following:
„Press Number of Copies to enter 
the number of copies (up to 99).
„Press or hold a or b to increase or 
decrease the number of copies.
cPress Start.
Note
To sort your copies, see Sorting copies 
using the ADF...

Making copies
23
4
Copy options 
(temporary settings)
4
When you want to quickly change the copy 
settings temporarily for the next copy, use the 
temporary Copy keys. You can use different 
combinations.
 
The machine returns to its default settings 
one minute after copying.
Enlarging or reducing the 
image copied4
You can choose the following enlargement or 
reduction ratios:
* The factory setting is shown in Bold with an 
asterisk.(DCP-7040 only) When set to Auto, the 
machine calculates the...

Chapter 4
24
Adjusting contrast4
Contrast4
Adjust the contrast to help an image look 
sharper and more vivid.
To temporarily change the contrast setting, 
follow the steps below:
aLoad your document.
bEnter the number of copies you want.
cPress Contrast.
dPress a or b to increase or decrease the 
contrast.
PressOK.
ePress Start.
 
To change the default setting follow the steps 
below:
aPress Menu.
bPress a or b to choose 2.Copy.
Press OK.
cPress a or b to choose 2.Contrast.
Press OK.
dPress a or b to...