Brother Dcp 7020 User Manual

Making copies3 - 4
3
Changing the temporary copy settings
Use the Options  key to quickly set the following copy settings temporarily for the next copy.
Note
The factory settings are shown in Bold.
After you choose your settings by pressing  Set, the LCD shows Set temporarily.
Press  Start if you have finished choosing settings.
Press  Menu Selections Options Page
Quality Auto
Text
Photo3-5
Stack/SortStack
Sort3-5
Page LayoutOff(1 in 1)
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
Poster(3 x 3)3-5
Select...

Chapter 3
3 - 5
Quality
You can select the copy quality. The default 
setting is 
Auto.
1Load your document.
2Press  Options  and   or   to select 
Quality.
Press  Set.
3Press   or   to select the copy 
quality you want (
Auto, Text or 
Photo).
Press  Set.
4Press  Start.
Sorting copies using the ADF 
You can sort multiple copies. Pages will be 
stacked in the order  (1 2 3),  (1 2 3) 
and so on.
1Load your document.
2Press  Number of Copies  repeatedly 
until the number you want appears 
(up to 99)....

Making copies3 - 6
3
If you are using the scanner glass:
6After the DCP scans the page, 
the LCD shows: 
Press   to scan the next page.
7Put the next document on the scanner 
glass.
Press Set.
Repeat Steps 6 and 7 for each page of 
the layout.
8After all the pages of the document have 
been scanned, press   to end.
Place document face up in the ADF in the 
direction shown below. 2 in 1 (P)
4 in 1 (P) Place document face down on the scanner 
glass in the direction shown below.
2 in 1 (P)
4 in 1 (P)
Next...

Chapter 3
3 - 7
Making a poster (Page Layout)
You can create a poster. When you use the 
Poster feature your DCP divides your 
document into sections, then enlarges the 
sections so you can assemble them into a 
poster. If you want to print a poster, use the 
scanner glass.
Note
■Please make sure paper size is set to 
Letter, Legal or A4.
■For Poster copies, you cannot make more 
than one copy or use the Enlarge/Reduce 
feature.
1Load your document.
2Press  Options  and   or   to select 
Page Layout....

Making copies3 - 8
3
Adjusting contrast
You can change the contrast to help an image 
look sharper and more vivid.
1Press Menu and  or  to select 
2.Copy.
Press  Set.
2Press   or   to select 2.Contrast.
Press  Set.
3Press   to increase the contrast.
—OR —
Press   to decrease the contrast.
Press  Set.
4Press  Stop/Exit .
Out of Memory 
message
If the memory becomes full while you are 
making copies, the LCD message will guide 
you through the next step.
If the 
Out of Memory message appears 
when you are...

4 - 1
4
The User’s Guide on the CD-ROM includes the Software User’s Guide for features available when 
connected to a computer (for example, Printing and Scanning). The availability of the features 
listed below varies by model:
■Using the machine as a Printer (See Chapter 1 in the Software User’s Guide on the CD-ROM.)
■How to Scan (See Chapter 2 in the Software User’s Guide on the CD-ROM.)
■Using ControlCenter2.0 (See Chapter 3 in the Software User’s Guide on the CD-ROM.)
■Using Remote Setup (See...

5 - 1
5
5
Federal Communications 
Commission (FCC) 
Declaration of Conformity 
(USA only)
Responsible Party:
Brother International Corporation
100 Somerset Corporate Boulevard
Bridgewater, NJ 08807-0911 USA
TEL: (908) 704-1700
declares, that the products
Product Name: Laser DCP, DCP-7020
comply with Part 15 of the FCC Rules. Operation 
is subject to the following two conditions: (1) This 
device may not cause harmful interference, and 
(2) this device must accept any interference 
received, including...

Chapter 5
5 - 2
Industry Canada Compliance 
Statement (Canada only) 
This Class B digital apparatus complies with 
Canadian ICES-003. 
Cet appareil numérique de la classe B est 
conforme à la norme NMB-003 du Canada.
Disconnect device
This product must be installed near an AC power 
outlet that is easily accessible. In case of 
emergency, you must disconnect the power cord 
from the AC power outlet to shut off the power 
completely.
Laser safety
This equipment is certified as a Class 1 laser 
product...

Important information5 - 3
5
Important safety instructions
1Read all of these instructions.
2Save them for later reference.
3Follow all warnings and instructions marked 
on the product.
4Unplug this product from the wall outlet 
before cleaning inside of the DCP. Do not 
use liquid or aerosol cleaners. Use a damp 
cloth for cleaning.
5Do not use this product near water.
6Do not place this product on an unstable 
cart, stand, or table. The product may fall, 
causing serious damage to the product.
7Slots...

Chapter 5
5 - 4
FUnplug this product from the AC power outlet 
and refer servicing to Authorized Service 
Personnel under the following conditions: 
 When the power cord is damaged or  frayed.
 If liquid has been spilled into the product.
 If the product has been exposed to rain or  water.
 If the product does not operate normally  when the operating instructions are 
followed. Adjust only those controls that 
are covered by the operating instructions. 
Improper adjustment of other controls may...