Brother Dcp 560cn User Manual

							
Section III
Direct Photo PrintingIII
Printing photos from a memory card or 
USB Flash memory drive
34
Printing photos from a camera50
 
						

							34
5
PhotoCapture Center™ 
Operations
5
Printing from a memory card 
or USB Flash memory drive 
without a PC5
Even if your machine is not connected to your 
computer, you can print photos directly from 
digital camera media or a USB Flash memory 
drive. (See Print Imageson page 37.)
Scanning to a memory card or 
USB Flash memory drive 
without a PC5
You can scan documents and save them 
directly to a memory card or USB Flash 
memory drive. (See Scan to a memory card 
or USB Flash memory driveon page 48.) 
Using PhotoCapture Center™ 
from your computer5
You can access a memory card or USB Flash 
memory drive that is inserted in the front of 
the machine from your PC.
(See PhotoCapture Center™ for Windows
® 
or Remote Setup & PhotoCapture Center™ 
for Macintosh
® in the Software Users Guide 
on the CD-ROM.)
Using a memory card or USB 
Flash memory drive5
Your Brother machine has media drives 
(slots) for use with popular digital camera 
media: CompactFlash
®, Memory Stick®, 
Memory Stick Pro™, SecureDigital™, 
MultiMediaCard™, xD-Picture Card™ and 
USB Flash memory drives.
„miniSD™ can be used with a miniSD™ 
adapter.
„Memory Stick Duo™ can be used with a 
Memory Stick Duo™ adapter.
„Memory Stick Pro Duo™ can be used with 
a Memory Stick Pro Duo™ adapter.
„Adapters are not included with the 
machine. Contact a third party supplier for 
adapters.
The PhotoCapture Center™ feature lets you 
print digital photos from your digital camera at 
high resolution to get photo quality printing.
Printing photos from a memory 
card or USB Flash memory drive
5
  
CompactFlash®Memory Stick®
Memory Stick Pro™
  
SecureDigital™
MultiMediaCard™xD-Picture Card™
 
USB Flash memory 
drive
22 mm or less
11 mm or less
 
						

							Printing photos from a memory card or USB Flash memory drive
35
5 Memory cards or a USB Flash 
memory drive folder structure5
Your machine is designed to be compatible 
with modern digital camera image files and 
memory cards; however, please read the 
points below to avoid errors:
„The image file extension must be .JPG 
(Other image file extensions like .JPEG, 
.TIF, .GIF and so on will not be 
recognized).
„PhotoCapture Center™ printing must be 
performed separately from PhotoCapture 
Center™ operations using the PC. 
(Simultaneous operation is not available.)
„IBM Microdrive™ is not compatible with 
the machine.
„The machine can read up to 999 files on a 
memory card or USB Flash memory drive.
„CompactFlash
® Type II is not supported.
„This product supports xD-Picture Card™ 
Type M / Type H.
„The DPOF file on the memory cards must 
be in a valid format. 
(See DPOF printingon page 43.)Please be aware of the following:
„When printing the INDEX or IMAGE, the 
PhotoCapture Center™ will print all the 
valid images, even if one or more images 
have been corrupted. The corrupted 
image will not be printed.
„(memory card users)
Your machine is designed to read memory 
cards that have been formatted by a digital 
camera.
When a digital camera formats a memory 
card it creates a special folder into which it 
copies image data. If you need to modify 
the image data stored on a memory card 
with your PC, we recommend that you do 
not modify the folder structure created by 
the digital camera. When saving new or 
modified image files to the memory card 
we also recommend you use the same 
folder your digital camera uses. If the data 
is not saved to the same folder, the 
machine may not be able to read the file or 
print the image.
„(USB Flash memory drive users)
This machine supports USB Flash 
memory drives that has been formatted by 
Windows
®.
 
						

							Chapter 5
36
Getting started5
Firmly put a memory card or USB Flash 
memory drive into the correct slot.
 
1 USB Flash memory drive
2 CompactFlash
®
3 SecureDigital™, MultiMediaCard™
4 Memory Stick
®, Memory Stick Pro™
5 xD-Picture Card™
CAUTION 
The USB direct interface supports only a 
USB Flash memory drive, a PictBridge 
compatible camera, or a digital camera that 
uses the USB mass storage standard. Any 
other USB devices are not supported.
 
PhotoCapture key indications:
 
„PhotoCapture light is on, the memory  
card or USB Flash memory drive is 
properly inserted.
„PhotoCapture light is off, the memory  
card or USB Flash memory drive is not 
properly inserted.
„PhotoCapture light is blinking, the 
memory  card or USB Flash memory drive 
is being read or written to.
CAUTION 
DO NOT unplug the power cord or remove 
the memory card or USB Flash memory 
drive from the media drive (slot) or USB 
direct interface while the machine is 
reading or writing to the memory card or 
USB Flash memory drive (the 
PhotoCapture key is blinking). You will 
lose your data or damage the card.
 
The machine can only read one device at a 
time so do not put more than one device in 
the slot.
12345
 
						

							Printing photos from a memory card or USB Flash memory drive
37
5
Entering PhotoCapture mode5
After you insert the memory card or USB 
Flash memory drive, press the 
(PhotoCapture) key to illuminate it in 
green and display the PhotoCapture options 
on the LCD.
The LCD shows:
 
Press a or b to scroll through the 
PhotoCapture key options.
„View Photo(s) (See page 37.)
„Print Index (See page 37.)
„Print Photos (See page 38.)
„Photo Effects (See page 39.)
„Search by Date (See page 41.)
„Print All Photos (See page 42.)
„Slide show (See page 42.)
„Trimming (See page 43.)
Note
If your digital camera supports DPOF 
printing, see DPOF printingon page 43.
 
When the option you want is highlighted, 
press OK.
Print Images5
View Photo(s)5
You can preview your photos on the LCD 
before you print them. If your photos are large 
files there may be a delay before each photo 
is displayed on the LCD.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press (PhotoCapture). 
bPress a or b to choose 
View Photo(s).
Press OK.
cPress d or c to choose your photo.
dPress + or - repeatedly to enter the 
number of copies you want.
eRepeat stepc and stepd until you 
have chosen all the photos.
fAfter you have chosen all the photos, do 
one of the following: 
„Press OK and change the print 
settings. (See page 44.) 
„If you do not want to change any 
settings, press Colour Start to print.
Print Index (Thumbnails)5
The PhotoCapture Center™ assigns 
numbers for images (such as No.1, No.2, 
No.3, and so on).
 
Print Index
Print Photos
Photo Effects View Photo(s)
PHOTO
OKSelect & Press
 
						

							Chapter 5
38
The PhotoCapture Center™ uses these 
numbers to identify each picture. You can 
print a thumbnail page (Index page with 5 
images per line). This will show all the 
pictures on the memory card or USB Flash 
memory drive.
Note
Only file names that are 8 characters or 
less will be printed correctly on the index 
sheet.
 
aMake sure you have put the memory 
card or USB Flash memory drive in the 
correct slot.
Press (PhotoCapture). 
bPress a or b to choose Print Index.
Press OK.
cPress a or b to choose the paper 
settings, Paper Type or Paper Size.
Do one of the following.
„If you chose Paper Type, press OK 
and press a or b to choose the type 
of paper you are using, 
Plain Paper, Inkjet Paper, 
Brother Photo or Other Photo. 
Press OK.
„If you chose Paper Size, press OK 
and press a or b to choose the paper 
size you are using, Letter or A4.
Press OK.
„If you do not want to change the 
paper settings, go to d
dPress Colour Start to print.
Print Photos5
Before you can print an individual image, you 
have to know the image number.
aMake sure you have put a memory card or 
USB Flash memory drive in the correct slot.
Press (PhotoCapture). 
bPrint the Index. (See Print Index 
(Thumbnails)on page 37.)
cPress a or b to choose Print Photos.
Press OK.
dPress a repeatedly to choose the image 
number that you want to print from the 
Index page (Thumbnails).
If you want to choose a two digit number, 
press 
c to move the cursor to the next digit.
(For example, enter 1, c, 6 to print image 
No.16.)
Press OK.
Note
Press b to decrease the image number.
 
eRepeat stepd until you have entered all 
the image numbers that you want to print. 
(For example, enter 
1, OK, 3, OK, 6, OK 
to print images No.1, No.3 and No.6.)
Note
You can enter up to 12 characters 
(including commas) for the image 
numbers you want to print.
 
fAfter you have chosen all the image 
numbers, press OK again.
gPress + or - repeatedly to enter the 
number of copies you want.
hDo one of the following:
„Change the print settings. 
(See page 44.)
„If you do not want to change any 
settings, press Colour Start to print.
 
 
						

							Printing photos from a memory card or USB Flash memory drive
39
5
Photo Effects5
You can edit and add effects to your photos 
and view them on the LCD before printing.
Note
•After adding each effect, you can enlarge 
the view of the image by pressing 
Ink Management. To go back to the original 
size, press 
Ink Management again.
• The Photo Effects feature is supported by 
technology from Reallusion, Inc.
 
Auto Correct5
Auto Correct is available for most photos. The 
machine decides the suitable effect for your 
photo.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press (PhotoCapture). 
bPress a or b to choose Photo Effects.
Press OK.
cPress d or c to choose your photo.
Press OK.
dPress a or b to choose Auto Correct.
Press OK.
ePress + or - repeatedly to enter the 
number of copies you want.
Press OK.
fDo one of the following.
„Press OK and change the print 
settings. (See page 44.)
„If you do not want to change any 
settings, press Colour Start to print.
Note
If Remove Red-Eye appears on the LCD, 
press 
a to remove red-eye from your photo.
 
Enhance Skin-Tone5
Enhance Skin-Tone is best used for adjusting 
portrait photographs. It detects human skin 
colour in your photos and adjusts the image.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press (PhotoCapture). 
bPress a or b to choose Photo Effects.
Press OK.
cPress d or c to choose your photo.
Press OK.
dPress a or b to choose 
Enhance Skin-Tone.
Press OK.
eDo one of the following.
„Press OK if you do not want to 
change any settings.
„Press a or b to adjust the effect level 
manually. Press OK when you have 
finished.
fPress + or - repeatedly to enter the 
number of copies you want.
gDo one of the following.
„Press OK and change the print 
settings. (See page 44.)
„If you do not want to change any 
settings, press Colour Start to print.
 
						

							Chapter 5
40
Enhance Scenery5
Enhance Scenery is best used for adjusting  
landscape photographs. It highlights green 
and blue areas in your photo, so that the 
landscape looks more sharp and vivid.
aMake sure you have put the memory 
card or USB Flash memory drive in the 
correct slot.
Press (PhotoCapture). 
bPress a or b to choose Photo Effects.
Press OK.
cPress d or c to choose your photo.
Press OK.
dPress a or b to choose  
Enhance Scenery.
Press OK.
eDo one of the following.
„Press OK if you do not want to 
change any settings.
„Press a or b to adjust the effect level 
manually. Press OK when you have 
finished.
fPress + or - repeatedly to enter the 
number of copies you want.
gDo one of the following.
„Press OK and change the print 
settings. (See page 44.)
„If you do not want to change any 
settings, press Colour Start to print.
Remove Red-Eye5
The machine detects eyes in your photos and 
will remove red-eye from your photo.
Note
There are some cases when red-eye may 
not be removed.
• When the face is too small.
• When the face is turning too far up, 
down, left or right.
 
aMake sure you have put a memory card or 
USB Flash memory drive in the correct slot.
Press (PhotoCapture). 
bPress a or b to choose  Photo Effects.
Press OK.
cPress d or c to choose your photo.
Press OK.
dPress a or b to choose  Remove Red-Eye.
Press OK.
„
When Remove Red-Eye is successful, 
the photo after effect is shown. The 
adjusted part is shown in a red frame.
„When Remove Red-Eye is unsuccessful, 
Unable to Detect. is shown.
Note
Press a to try Remove Red-Eye again.
•
When Remove Red-Eye is successful, 
the photo after effect is shown. The 
adjusted part is shown in a red frame.
•When Remove Red-Eye is unsuccessful, 
Unable to Detect. is shown.
 
ePress + or - repeatedly to enter the 
number of copies you want.
fDo one of the following.
„Press OK and change the print 
settings. (See page 44.)
„If you do not want to change any 
settings, press Colour Start to print.
 
						

							Printing photos from a memory card or USB Flash memory drive
41
5
Monochrome5
You can convert your photo to monochrome.
aMake sure you have put a memory card or 
USB Flash memory drive in the correct slot.
Press (PhotoCapture). 
bPress a or b to choose  Photo Effects.
Press OK.
cPress d or c to choose your photo.
Press OK.
dPress a or b to choose  Monochrome.
Press OK.
ePress + or - repeatedly to enter the 
number of copies you want.
fDo one of the following.
„Press OK and change the print 
settings. (See page 44.)
„If you do not want to change any 
settings, press Colour Start to print.
Sepia5
You can convert the colour of your photo to 
sepia.
aMake sure you have put a memory card or 
USB Flash memory drive in the correct slot.
Press (PhotoCapture). 
bPress a or b to choose Photo Effects.
Press OK.
cPress d or c to choose your photo.
Press OK.
dPress a or b to choose Sepia.
Press OK.
ePress + or - repeatedly to enter the 
number of copies you want.
fDo one of the following.
„Press OK and change the print 
settings. (See page 44.)
„If you do not want to change any 
settings, press Colour Start to print.
Search by Date5
You can find your photos based on date.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press (PhotoCapture). 
bPress a or b to choose 
Search by Date.
Press OK.
cPress a or b to choose the date that you 
want to search from.
Press OK.
dPress d or c to choose your photo.
Note
You can view photos with other dates by 
pressing d or c continuously. Press d to 
view an older photo and c to view a newer 
photo.
 
ePress + or - repeatedly to enter the 
number of copies you want.
fRepeat stepd and stepe until you 
have chosen all your photos.
gAfter you have chosen all your photos, 
do one of the following: 
„Press OK and change the print 
settings. (See page 44.) 
„If you do not want to change any 
settings, press Colour Start to print.
 
						

							Chapter 5
42
Print All Photos5
You can print all the photos on your memory 
card. 
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press (PhotoCapture). 
bPress a or b to choose 
Print All Photos.
Press OK.
cPress + or - repeatedly to enter the 
number of copies you want.
dDo one of the following: 
„Change the print settings. (See 
page 44.) 
„If you do not want to change any 
settings, press Colour Start to print.
Slide show5
You can view all your photos on the LCD 
using Slide show. You can also choose a 
photo during the operation.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press (PhotoCapture). 
bPress a or b to choose Slide show.
Press OK.
cPress Stop/Exit to finish Slide show.
Printing a photo during a Slide show5
aPress OK to stop at one image while 
Slide show is operating.
b Press + or - repeatedly to enter the 
number of copies you want.
cDo one of the following: 
„Press OK and change the print 
settings. (See page 44.) 
„If you do not want to change any 
settings, press Colour Start to print.