Boxlight Seattle Series User Manual

							28
MENU (Video Mode)
Audio Menu
Step:
1.	Use	the	▲	/▼	buttons	to	
select an item.
2.	 Use	the	◄	/	►	buttons	
to select an item or 
adjust the value.
Item Selection Description
VOLUME 00/40 Adjust the volume.
MUTE OFF/ON Mute the volume OFF / ON. 
						

							29
MENU (Video Mode)
Setting Menu
Step:
1.	Use	the	▲	/▼buttons	to	
select an item.
2.	 Use	the	◄	/	►	buttons	
to select an item or 
adjust the value.
Item Selection Description
AUTO KEYSTONE OFF/ON Automatically Correct keystone distortion in image.
KEYSTONE V -70/+70 Correct vertical keystone distortion in image manually.
AUTO SEARCH OFF/ON Search signal source manually or automatically. 
						

							30
MENU
Advanced Menu
Step:
1.	Use	the	▲	/▼buttons	
to select an item.
2.	 Use	the	◄	/	►	buttons	
to select an item or 
adjust the value.
Item Selection Description
ZOOM / PAN EXECUTE Execute digital zoom and pan function.
FREEZE OFF/ON Freeze the current image on the screen.
BLANK OFF/ON Hide the image, display a black screen.
BLANK POWER OFF 15/30/60 
Minute
Set power off time after blank.
RESET EXECUTE Reset all menu function to their factory default values.
RESIZE  4:3,16:9, 1:1
LANGUAGE ENGLISH Select the language that the menu and on screen massage is 
display in
English繁體中文
简体中文
日本語
한국어
Nederlands
Français
Deutsch
Italiano
SuomiPolski PortuguêsРусский
Español
Svenska
Українська
ไทย
SELECT SOURCE EXECUTE Select the input source from:
RGB 1       RGB 2 
S-Video
Video
DVI-I
Y,Pb,Pr
The search is started from the current port. Then when an 
input is found, the projector will stop searching and display 
the image.
LOGO SETTING EXECUTE Customize the start-up logo. 
						

							31
MENU
Advanced Menu
LOGO SETTING
This function allows you 
to customize the start-up 
logo.
IMPORTANT:
To implement Logo 
setting function, please 
enter PIN code first. 
Without inputting the PIN 
code, you cannot modify 
Logo setting function. 
Item SelectionDescription
LOGO MODEDEFAULT
USER
OFF Select	Mode(	►	cursor	button)
The factory logo.
The image you captured.
The blank image. You can select color with background 
function.
LOGO
CAPTURE EXECUTE Start to capture the image.(PC mode only)
BACKGROUND BLACK
BLUE
WHITESet background color.
LOGO SIZE ORIGINAL
FULL Display the captured image in original size and put in the 
center of the screen.
Expend the image to full screen. 
						

							32
MENU
NOTE	 ►To	capture	an	image	is	available	only	in	computer	mode.
	 ►The	area	that	can	be	captured	is	512	x	384	dots.
Advanced Menu
Logo Capture
How to use this function?
		 Select Logo Capture item in the logo 
setting	menu,	and	press	►	button.
		 You can see the red frame to select 
captured area.
		 Use 4 direction buttons to adjust the 
position of the frame.
		 Press “MENU” to start capturing and 
display a dialog. 
Image

Logo Capture In Progress. 
						

							33
MENU
Presentation Menu
Step:
1.	Use	the	▲	/▼buttons	
to select an item.
2.	 Use	the	◄	/	►	buttons	
to select an item or 
adjust the value.
Item Selection Description
AUTO CEILING OFF / ONAutomatically invert the image when the projector is turned 
upside down, i.e. when the projector is mounted on the 
ceiling.
FRONT EXECUTE Normal projection mode.
CEILING EXECUTE Mirror the image vertically, only for the projector mounted 
upside down.
REAR EXECUTEMirror the image horizontally, only for projecting onto rear 
projection screen.
CEILING AND 
REAR EXECUTEMirror the image horizontally and vertically. Projecting onto 
a rear projection screen while projector is upside down.
LAMP MODE NORMAL / 
ECONOMICSwitch lamp mode between normal or ECO mode.
LAMP Show lamp use time.
RESET LAMP 
TIMER EXECUTEAfter changing a new lamp, execute this function to reset 
the lamp timer. 
						

							34
MENU
NOTE
►		The	replacement	warning	message	is	set	to	appear	after	about	2000	hours	of	lamp	use	in	order	to maintain the initial brightness. When replacement message appears, replace the lamp with a 
new one as soon as possible, even if the lamp is still workable.
Presentation Menu
Reset Lamp Timer
The lamp timer is the time counted after the last resetting. The usage time of the lamp 
is	shown	in	the	PRESENTATION	Menu.	Pressing	the	RESET	button	or	the	►	button	
displays a dialog.
To	reset	the	lamp	time,	select	the	RESET	using	the	►	button. 
						

							35
MENU
Security Menu
Step:
1.	Use	the	▲	/▼buttons	to	
select an item.
2.	 Use	the	◄	/	►	buttons	
to select an item or adjust 
the value.
Item Selection Description
PIN LOCK 
PROTECTIONOFF
ON 1
ON 2OFF: Turn off PIN lock protection.
ON 1: 
  After plugging in AC power, you need to key in PIN 
code	at	the	first	time	of	use.	If	the	 AC	power	stays	
unplugged, you do not need to key in PIN code next 
time when you use the projector.
ON 2:    You need to key in PIN code every time when you 
turn on the projector.
 CAUTION:
Once the PIN code had been set, the projector cannot be 
used unless you enter the correct PIN code.
 
MODIFY PIN EXECUTE 1. Press “ MENU ” on the projector or remote control.
2.		
Use	the	►	button	to	select	the	MODIFY 	PIN	item	of	the	
SECURITY category.
3.		 Press 	the 	► 	button 	to 	change 	PIN 	LOCK 	PROTECTION 	
mode.
4. Please enter the original PIN code.
    (a)   If the PIN is correct, system will allow you to change 
a new PIN code.
    (b)   If the PIN is incorrect, a “ Code Error ” message will appear.
5.	Please 	enter 	a 	new 	PIN 	code. 	And 	then 	enter 	again 	to 	confirm.
NOTE:
(1)    To change the PIN lock protection state, you must 
enter	the	PIN	code	first.
(2)	Please	enter:	0000	for	first-time	use.
(3)    To avoid unnecessary trouble, if you activate the [PIN 
Lock Protection], it is highly recommended that you 
write down the PIN code and store it in a safe place. 
						

							36
MENU
Security Menu
Step:
1.	Use	the	▲	/▼buttons	to	
select an item.
2.	 Use	the	◄	/	►	buttons	to	
select an item or adjust the 
value.
Item Selection Description
FILTER TIMERShow	the	filter	use	hour.
RESET FILTER
TIMER EXECUTE
Reset	the	filter	timer	after	cleaning	/	changing	filter.
FILTER COUNTER 500 hours
800 hours
1000 hoursSelect (500 / 800 / 1000 hours) depending on the 
environment.(default : 500 hours). Please see as below.
MAC ADDR. If purchasing LAN control module, "MAC ADDR." will be 
shown in "Security" Menu. 
MAC address stands for unique Media Access Control 
address of LAN control module and displays with six 
groups of two hexadecimal digits.
CLOSED CAPTION OFF(Default)
C.C1
C.C2
C.C3
C.C4
T1
T2
T3
T4The Closed Caption function intimates the sound effects, 
dialogue, and narration in the content of the television 
program or video source.
Caption (C.C1~C.C4) : Display closed caption Text 
(T1~T4) : Display text data, which is for additional 
information such as news reports or a TV program guide.
NOTE : 
  This function is available only in video / S-Video 
source.
LAN MODULE OFF
ONIf purchasing LAN control module, "LAN MODULE" will 
be shown in "Security" Menu.
Select ON/OFF to turn on/off LAN control feature. 
						

							37
MENU
NOTE
►	Please	reset	the	Filter	time	only	when	you	replace	the	filter.
Auto Filter Alert
Auto	Filter	Alert	is	in	SECURITY 	category	to	show	the	air	filter	use	time	and	alert	user	
to	change	filter.	Pressing	►	cursor	button	will	display	a	dialog.	 When	the	operating	time	
reaches	the	set	time,	a	warning	message	will	appear	on	the	screen	to	remind	user	of	filter	
cleaning / replacing.
Filter Replace...
Filter has been used for more than 500 hours.