Boxlight Seattle Series User Manual

							Seattle Series
151 NE State Hwy 300, Ste ABelfair, WA 98528360.464.2119
www.boxlight.com
User Manual 
						

							About the Owner’s Manual
Features
Please read the owner’s manual thoroughly to ensure correct usage of the projector and its 
features.
After reading, store the owner’s manual in a safe place for future reference.
1. Dress up Design
2.  Designed for tough environment
3.  Side change lamp
4.	 Side	change	filter
5.  Quick off
6.  Advanced Anti-theft features
7.    Five auto features (Auto Search, Auto Sync, Auto Ceiling, Auto Keystone and Auto 
Filter Alert)
8.    Seven display modes (Natural, Cinema, Daylight, Green board, White Board, Black 
Board and User)
9.  Built-in 8W speaker
10.  Logo capture
11.  Image freeze function
12.  Digital zoom adjustment
The content of this manual is subject to change without  previous notice\
.
All rights reserved.
Issue of edition 1002.05_01
Projector 
						

							1
Contents
About Owner’s Manual
Contents ........................................................................\
.............................................1
Contents of Your Box  ........................................................................\
.................... 3-A
Safety Instructions  ........................................................................\
............................4
Safety Labels...........................................................\
...................................................5
Part Names  ........................................................................\
........................................6
Projector ........................................................................\
.......................................... 6
Control Panel  ........................................................................\
.................................. 7
Rear  ........................................................................\
................................................. 8
Setting Up  ........................................................................\
..........................................9
Arrangement  ........................................................................\
.................................... 9
Power ON / OFF  ........................................................................\
............................ 10
Setting Up The Projector  ........................................................................\
............... 11
Ceiling Mounted Installation Guide  ...................................................................... 12
Adjusting The Projector’s Elevation  ..................................................................... 13
How To Connect  ........................................................................\
............................ 14
Remote Control  ........................................................................\
...............................16
Remote Control (Optional)  ........................................................................\
............19
Menu Operation  ........................................................................\
..............................23
How To Operate On-Screen Display  ...................................................................... 23
MENU (PC Mode) ........................................................................\
...........................24
Picture Menu (PC Mode)  ........................................................................\
................ 24
Audio Menu (PC Mode)  ........................................................................\
................. 25
Setting Menu (PC Mode)  ........................................................................\
................ 26
MENU (Video Mode) ........................................................................\
......................27
Picture Menu (Video Mode)  ........................................................................\
............ 27
Audio Menu (Video Mode)  ........................................................................\
............. 28
Setting Menu (Video Mode)  ........................................................................\
............ 29 
						

							2
Contents
MENU ........................................................................\
..............................................30
Advanced Menu  ........................................................................\
............................. 30
Presentation Menu  ........................................................................\
......................... 33
Security Menu  ........................................................................\
................................ 35
PIN Key In Operation  ........................................................................\
.................... 38
Network Control Software Application  ................................................................39
Before Use  ........................................................................\
........................................40
Before To Use Network Control Software  ............................................................ 40
Projector Auto Search.  ........................................................................\
................... 41
Modify the Projector Setting  ........................................................................\
......... 44
Registering And Configuring the Projector  ..........................................................45
Delete  ........................................................................\
............................................. 45
Projector Setting  ........................................................................\
............................ 46
System Setting / Monitor / Default Setting / Auto Detect Optimal Setting  ........... 48
Link  ........................................................................\
................................................ 49
Control Panel Window Introduction  .....................................................................50
Power Control / Input Source / Function Key  ........................................................ 50
Function Key / Projector Status  ........................................................................\
...... 51
Network Control Window Introduction  .................................................................. 52
Maintenance Of Projector  ........................................................................\
..............53
Air Filter / Replacing the Air Filter  ........................................................................\
 53
Lamp / Replacing New Lamp  ........................................................................\
......... 54
Other Care / Cleaning the Lens  ........................................................................\
...... 56
Troubleshooting  ........................................................................\
...............................57
Indicator ........................................................................\
.......................................... 57
Error For Machine Defects  ........................................................................\
............. 58
List of Supported Monitor Displays  ....................................................................... 60
Appendix
Interactive Function Operation(Optional) 
						

							Safety InstructionsContents of Your Box
-        VOL        +
INPUT
ES C
MENU
AutoK
Stil l Blan
k
Check-list of your accessories
Please make sure that following items are included in the box, 
along with the main.
If any items missing, contact your dealer.
1. Projector
6. Remote control 2. Computer cable
3. Power cord 4.  Quick Start Guide
5.   Owner’s Manual CD
3-A 
						

							Safety InstructionsContents of Your Box
Optional
 Remote control 
 Remote control 
  USB Cable (1.5M) 
 Soft Bag
POWER
LASER
MOUSE-LAUTO BLANKMOUSE-R
MUTE
MENU
INPUTLASER
INDICA TOR
3-B 
						

							4
Safety Instructions
The projector is designed and tested to meet the latest standards for sa\
fety of information technology 
equipment. However, to ensure safe use of this product, it is important that you follow th\
e 
instructions mentioned in this manual and marked on the product.
 WARNING / CAUTION
1. If a problem occurs
-  If smoke or trange odors arise, continued use 
could	result	in	fire	or	electrical	shock.
-  If there is no image or sound, or the sound 
is distorted in the projector. In some cases, 
immediately remove the power cable from the 
power outlet. After making sure that the unit has 
stopped, contact your dealer for repairs. 
Never attempt to repair by yourself because this 
is dangerous.
2.  Do....
-  Place the projector in a stable horizontal 
position.
-  Put the projector in a cool place, and ensure that 
there	is	sufficient	ventilation.
-  To consult with your dealer before a special 
installation such as suspending from a ceiling.
3.  Do not....
-  Do not place the projector on an unstable, 
slanted or vibrating surface such as a wobbly or 
inclined stand.
-  Do not cover the projector's vents. Keep a space 
of 20 cm or more between the projector and 
other objects such as walls.
-Do not place the projector on metallic goods.
-  Do not place the projector on carpet, cushions 
or bedding. Do not place the projector in direct 
sunlight or near hot objects such as heaters.
-  Do not place anything near the projector lens or 
vents, or on top of the projector.
-  Do not place anything that may be sucked into 
or stick to the vents beside of the projector.
-  Do not use this projector if there is no image or 
sound, or if the sound is distorted.
-  Do not place this projector in a container 
containing liquid. 4.   
While connecting, make sure that the shape 
of	the	cable’s	connector	fits	the	port	to	
connect with. Be sure to tighten the screws 
on connectors with screws.
5.    Do not disassemble or modify the projector 
and accessories.
6.    Be careful not to damage the cables, and do 
not use damaged cables.
7.    Use appropriate accessories or otherwise 
designed cables. Ask your dealer about non-
accessory cables that may have other lengths.
8.    Make sure that devices are connected to the 
correct ports. An incorrect connection may 
result in malfunction or damage to the device 
and the projector.
9.    Do not look through the lens when the lamp 
is on.
Do not look through the lens when the lamp is 
on. The powerful light could adversely affect 
vision. Use special caution in households where 
children are present.
10.      A strong light is emitted when the projector’
s power on. Do not look into the lens of the 
projector or look inside of the projector.
Do not place the projector upon either side 
to project an image.
NO SIDEWARD
Do not point the projector down to 
project an image.
NO DOWNWARD 
						

							5
Safety Labels
Safety labels are used on or within the projector to 
alert you to items or areas requiring your attention. 
WARNING LABELEMI LABEL
LAMP DOOR WARNING LABEL 
						

							6
Part Names
1
2
37
8
4
5
6
7
8
Projector
1 Control panel
Operating system.
12 Lens cover
Attach when not using to protect the lens 
from becoming dirty or damaged.
3 Filter cover
Prevents dust and other foreign particles 
from being drawn into projector.
Remove	the	filter	cover	to	clean	the	air	
filter.
14 Focus ring
Use the focus ring to focus the projector 
image.
Rotate the focus ring until the image is 
clear.
15 Zoom ring
Use the zoom ring to adjust the size of the 
projected image.
Rotate the zoom ring until the image is the 
desired size.
16 Lamp door
The lamp unit is inside.
17 Foot adjust button
Lock / unlock the adjustable foot.
18 Front adjustable foot
Extend and retract to adjust the projection 
angle.
Front IR 
receiver
Outlet ventilation 
						

							7
Part Names
Control Panel
9
1010
11
1312 14
151617LAMP INDICATOR POWER INDICATOR
9 
KEYSTONE
Adjust the vertical keystone with menu-up, 
menu-down.
110 VOLUME + / -
Sound louder or lower.
11 INPUT
Select input source:
112 MENU
Display or hide the OSD main menu page.
113 BLANK
Blank the projected image. The time of 
Blank mode can be set in 15 minutes, 30 
minutes or 60 minutes. The projector will 
shut down automatically after passing each 
set time.
114 AUTO
Automatically adjust the setting to match 
the current input.
115  (POWER)
Power On / Off.
116 LAMP INDICATOR
Indicates a status in the internal projector 
temperature, lamp door properly closed or 
cooling down.
117 POWER INDICATOR
Light	on	or	flash	to	indicate	the	operating	
status of the projector.