Boxlight Seattle Series User Manual

48
Registering And Configuring The Projector
System Setting
Monitor
ItemDescription
Lamp TimerLamp timer from projector.
Air Filter Alert Air Filter Timer from projector.
System Status/
Tempeture Level System Status and Tempeture. Level from projector in Power On 
status.
Input Source Input Source from projector in Power On status.
< Table 2 >
Default Setting
Item Description
Lamp Timer Alert (Hr.)Default Setting Includes 1000/1500/2000 Hours.
When Lamp Timer reach alert target, window will show lamp...

49
Registering And Configuring The Projector
Link
		Select the registered projector in monitor window. Click mouse right key and select 
" Link " to show up the control panel table and the projector connected \
status.
< Graph 12 > : The control panel table 

50
Control Panel Window Introduction
		Power Control
Icon Name
Power on
Power off
		
Input Source
Icon Name
Video
S-Video
Y,Pb,Pr
DVI-I
RGB 1
Change Input Source
		Function Key
Icon Name
Icon Name
UpFreeze
DownBlank
LeftKeystone Correction +
RightKeystone Correction -
MenuIncrease Brightness
Auto SyncDecrease Brightness
MuteHigher Contrast 

51
Control Panel Window Introduction
	Function Key
Icon Name
Lower Contrast
Zoom In
Zoom Out
Volume Up
Volume Down
	
Projector Status
Icon Name
System Status
Input Source Status
Lamp Timer
Air Filter Timer   

52
Control Panel Window Introduction
	Network Control Window introduction
Icon
Name Description
Scan allCapture the all registered projectors’ information one 
time only.
Start Auto ScanAccording to the system setting, get the projector 
information automatically.
Stop Auto Capture Stop scanning the projector information.
Auto SearchSearch the projector in the same network to register and 
modify the setting.
Open Project File
Open	project	file	which	was	saved.
Save Project File Save the registered...

53
Maintenance of Projector
Air Filter
When	a	warning	message	appears	to	remind	you	to	clean	the	air	filter,	please	replace	a	
new	one	as	soon	as	possible.	Please	check	and	clean	the	air	filter	periodically.
Replacing the Air Filter
When	the	use	time	reaches	the	filter	counter	time,	the	projector	will	display	a	message	
that	indicates	to	replace	a	new	filter.	If	there	is	no	spare	air	filter	available,	please	contact	
your dealer.
 
Turn	off	the	projector,	and	unplug	the	power	cord.	Allow	the	projector	to...

54
Maintenance of Projector
Lamp
1.  If you want to replace new lamp, but the projector was just turned off, please let the 
projector cool down and unplug power cord at least 60 minutes.
2.   If the projector is mounted in the ceiling, contact your dealer to repla\
ce the lamp.
Replacing New Lamp
1. Remove the lamp door.
2.  Loosen 2 screws of the lamp holder. Take the handle on the top of the lamp, pull out 
the lamp straight off the projector.
3.	Insert	new	lamp,	lock	the	lamp	door	firmly	with	2...

55
Maintenance of Projector
 WARNING
The projector uses a high-pressure mercury lamp.
The	explosion	of	lamp	with	a	loud	bang	or	burn	out	could	possibly	cause	injury	or	a	fire.
When	the	bulb	burts,	it	is	possible	for	shards	of	glass	to	fly	into	the	lamp	housing;	and	
for gas containing mercury to escapefrom the projector’s vent holes.
If the lamp has broken, do not check the inside of the projector. Please ventilate the room 
immediately.
Do not touch or bring your face close to the broken pieces since it...

56
Maintenance of Projector
Other Care
Cleaning The Lens
If the lens is dirty and dusty, display quality maybe decreased. Before cleaning the lens, 
please make sure that the projector is cool down adequately.
After the projector has cooled down adequately, lightly wipe the lens with the available 
lens-cleaning cloth.
Do not touch the lens directly with your hand.
Additional
- In order to ensure the safe use of your projector, please contact your dealer to inspect 
about once a year.
-  Before...

57
Troubleshooting
Indicator
The power and lamp indicators show the status of the projector. Before requesting repair, 
check the projector status using the chart below. If the problem cannot be resolved, 
contact your dealer.
In normal status~~~
POWER LAMPCONDITIONSDESCRIPTION
Blinking In 
Green Off
Stand by mode Projector is ready to be turned 
on.
Lighting In 
Green Off
On mode Projector is on and operating.
Lighting In 
Green Blinking In 
Red 
( Slow ) Cool down mode Projector is in cool down mode...