Boxlight Raven Users Manual

xUser’s Manual
Control Panel
L
LE
ED
D
1.  POWER (Power LED indicator)
2. LAMP (Lamp LED indicator)
B Bu
ut
tt
to
on
n
1.
2. MENU\ENTER
3. KEYSTONE (v/u)
4. AUTO (t)
5.  Four direction buttons
6. SOURCE (s)
Interface Connector
1.U US
SB
B 
 c
co
on
nn
ne
ec
ct
to
or
r:
:
This connector is used for engineering purpose.
2. A AU
UD
DI
IO
O 
 i
in
np
pu
ut
t 
 c
co
on
nn
ne
ec
ct
to
or
r:
:
Connect an audio output from video equipment to this jack.
3. C CO
OM
MP
PU
UT
TE
ER
R 
 I
IN
N 
 (
(D
D-
-S
SU
UB
B)
)...

xUser’s Manual
Remote Control Components
1. Power button
2.  Four direction buttons
3. Menu button
4. Enter button
5. Keystone v/ubuttons
6. Volume v/ubuttons
7. Source button
8. Mute button
9. Blank button
10. 4:3/16:9 button
11. Auto button 

xUser’s Manual
Installation 
Connecting the Projector
A. Connecting to a Console
1. AC Power Cord
2. VGA Cable to Component Video Adapter
3. Component Video Adadpter to Console
15-pin VGA
Component Video  
to 15-pin VGA
Optional Component  
Video Adapter 

xUser’s Manual
B. Connecting to a Computer
1. AC Power Cord
2. VGA Cable (D-SUB to D-SUB) 

xUser’s Manual
C. Connecting to a Video Source
Connecting with S-Video Cable
1. AC Power Cord
2. S-Video Cable
3. Audio Cable 

xUser’s Manual
d. Connecting with Composite Video Cable
1. AC Power Cord
2. Composite Video Cable
3. Audio Cable 

xUser’s Manual
E. Connecting with HDTV Cable
1. AC Power Cord
2. D-SUB to HDTV Cable
3. Audio Cable
wWhen connecting cable, power cords of both a projector and external 
equipment should be disconnected from AC outlet.
Video Source(example)
Video Cassette RecorderVideo Disc Player
Component Video
output equipment
(such as DVD player or
high-definition TV source) 

xUser’s Manual
Powering On/Off the Projector
Powering On the Projector:
1.  Remove the projector lens cap.
2. Complete the AC power cord and peripheral signal cable(s) connections.
3. Press the button on the Projector Control Panel or the Power button on the Remote Control to 
turn on the power.
4.  Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects your source.
xIf the ”Searching for source” message appears on the screen, ensure that the appropriate signal 
cable(s)...

xUser’s Manual
Adjusting the Projected Image
Adjusting the Projector Height
To raise the projector:
1. Lift up the rear side of the projector, and press the foot adjuster buttons on the two sides.
2. Raise the projector to the desired display height, and then release the buttons to lock the foot 
adjusters into position.
To lower the projector:
1. Lift up the rear side of the projector, and press the foot adjuster buttons on the two sides.
2.  Lower the projector, and then release the buttons to lock the...

xUser’s Manual
Adjusting the Projector Zoom and Focus
1.  Adjust the image size by rotating the zoom ring.
Rotate to the right to reduce the image.
Rotate to the left to enlarge the image.
2.  Focus the image by rotating the focus ring.
A still image is recommended for focusing.
Adjusting Projection Image Size
Refer to the graphic and table below to determine the screen size and projection distance.