Boxlight Raven Users Manual
Here you can view all the pages of manual Boxlight Raven Users Manual. The Boxlight manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 2
xUser’s Manual FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that...
Page 3
xUser’s Manual Safety Instructions Read all of these instructions before you operate your projector and save for future reference. 1.Check that the operating voltage of your unit is identical with the voltage of your local power supply. 2.Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by the qualified personnel before operating it further. 3. Do not attempt to service this product yourself, as opening or removing covers may damage the components inside and...
Page 4
xUser’s Manual 13.For ventilation reasons, the fan continues to operate after the projector has been powered off. Please do not unplug the power cord until the fan stops. 14.The projector is equipped with ventilation holes (intake) and ventilation holes (exhaust). Do not block or place anything near these slots, or internal heat build-up may occur, causing picture degradation or damage to the projector. 15.When you replace the projector lamp, never touch the new bulb with your bare hands. The invisible...
Page 5
xUser’s Manual Notes on AC Power Cord AC Power Cord must meet requirement of country where you use a projector. Confirm an AC plug type with graphics below and proper AC Power Cord must be used. If supplied AC Power Cord does not match your AC outlet, contact your sales dealer. This projector is equipped with a grounding type AC line plug. Make sure that your outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We highly recommend using a video source device also...
Page 6
xUser’s Manual CONTENTS Product Introduction ........................................................................................................................ 6 Projector Feature .............................................................................................................................. 6 Package Contents ............................................................................................................................ 7 Getting to Know the Projector...
Page 7
xUser’s Manual Product Introduction Projector Features The projector integrates high-performance optical engine projection and a user-friendly design to deliver high reliability and ease of use. The projector offers the following features: xSingle chip 0.55" Texas Instruments DLP™ technology xSVGA (800 x 600 pixels) xCompact size, light weight for portability x1.2x manual zoom lens xAuto image re-sizing (Auto-Sync.) to 800 x 600 full screen with scaling compression compatibility for VGA, SVGA, XGA*...
Page 8
xUser’s Manual Package Contents When you unpack the projector, make sure you have all these components: wSave the original shipping carton and packing material; they will come in handy if you ever to ship your unit. For maximum protection, repack your unit as it was originally packed at the factory. wAccessories and components may vary by retailer and region. P Pr ro oj je ec ct to or r w wi it th h L Le en ns s C Ca ap p A AC C P Po ow we er r C Co or rd d 2 20 0' ' C Co om...
Page 9
xUser’s Manual Getting to Know the Projector Projector Components Front View 1. Lens cap 6. Focus ring 2. Lens cap strap 7. Control panel 3. Lens 8. Speaker 4. Ventilation holes (intake) 9. Front IR remote control sensor 5. Zoom ring 10. Ventilation holes (exhaust)
Page 10
xUser’s Manual Rear View Bottom View 1. Lamp cover 1. Interface 2. Rear IR remote control sensor 3. Security Lock Receptacle 4. AC power socket 5. Venilation holes (intake) 6. Foot adjuster 7. Foot adjuster button