Boxlight Projectowrite User Manual

							
-54- 
Interactive  Projector             
1/21/2008  
						

							
-55- 
Blank on 
If the projector is left in Blank mode for more than 15 minutes, the 
projector will automatically shut off the lamp and enter cool-down mode. 
Reset all 
1.After you select [reset all] on the OSD men u, the following 
confirmation message will appear on the screen. 
2.Press reset button on the remote control or the button on the keypad to 
reset the OSD Menu values. Press the ESC button or ignore the 
message to exit the Reset All function without changing any settings. 
4.ADVANCE 
Zoom/pan execute Execute digital zoom and pan function 
Still on/off Freezes the current image on the screen. 
Blank on/off Hide the image, displays a blank, black screen*(see below) 
Reset all execute Resets all OSD Menu function to their factory default 
values*( see below) 
Resize 4:3/16:9 Select the image size 
Language English Select the language that the OSD Menu and on screen 
massage are display in English / Chinese(s) / Chinese(t) / 
Italian / Spanish / French / German / Korean / Polish 
Select source execute Select the input source from: 
Computer 1 / Computer2 (RGB or YPbPr) / Video / S-Video 
Interactive  Projector             
1/21/2008  
						

							
-56- 
Interactive  Projector             
5.PRESENTATION 
Auto ceiling off/on Automatically inverts the image when the projector 
is turned upside down i.e. when the projector is 
mounted on the ceiling 
Front execute Normal projection mode 
Ceiling execute Inverts the image vertically, used when the 
projector is mounted upside down 
Rear execute Inverts the image horizontally, used when 
projecting onto a rear projection screen 
Ceiling and 
Rear
execute Inverts the image horizontally and vertically, used 
when the projector is mounted upside down and 
projecting onto a rear projection screen 
Auto Brightness off/on  Auto detects brightness; it turns to economic mode 
automatically when the brightness is low.  
Lamp mode 
(some model doesn’t have this mode) 
normal
economic
Economic mode reduces the lamp brightness 
economic to extend lamp life and quiet the 
projector 
Lamp    Show Lamp timer 
Reset lamp timer 
(optional)
execute After changing a new lamp,execute this function 
for reset the Lamp timer.(see below) 
1/21/2008  
						

							
-57- 

Reset Lamp Timer 
1.After you select［Reset Lamp Timer］on the OSD menu, the following confirmation 
message will appear on the screen. 
2.You choose［Yes］, It will reset the lamp time back to ［0］.
*The replacement warning message is set to appear after about 2000 hours of lamp 
use in order to maintain the initial brightness and quality of the projected images. 
When the lamp replacement message appears, replace the lamp with a new one as 
soon as possible, even if it is still working. 
Interactive  Projector             
1/21/2008  
						

							
-58- 
1. PICTURE 
Brightness 000/100 Adjusts the overall image brightness 
Contrast  000/100 Adjusts the difference between light and dark 
areas of the image 
sharpness 000/002 Adjusts the image sharpness 
Color 000/100 Adjusts the image color 
Tint  000/100 Adjusts the image tint 
Display mode  Adjusts the color temperature of the image 
 Powerful 
Video
Presentation
Natural
Cinema
User
Enhance brightness 
Keep the soft tender color  
For computer presentation use 
Nature color  
Enhance contrast mode for Cinema mode 
adjustments of each RGB color 
 User Red 
User Green
User Blue 
000/100
000/100
000/100
Interactive  Projector             
Video Mode
1/21/2008  
						

							
-59- 
2. AUDIO 
Volume 000/040 Adjusts the volume 
Mute off/on Mutes the volume off/on 
Interactive  Projector             
1/21/2008  
						

							
-60- 
3.SETTING 
Auto keystone execute Automatically Corrects keystone distortion in image 
i.e. press once to do once 
Keystone V -80/+80 Corrects vertical keystone distortion in image 
Auto search off/on Search signal source automatically. 
Interactive  Projector             
1/21/2008  
						

							
-61- 
Interactive  Projector             
1/21/2008  
						

							
-62- 
Blank on 
If the projector is left in Blank mode for more than 15 minutes, the 
projector will automatically shut off the lamp and enter cool-down mode. 
Reset all 
1.After you select [reset all] on the OSD men u, the following 
confirmation message will appear on the screen.  
    
    
2.Press reset button on the remote control or the button on the 
keypad to reset the OSD Menu values. Press the ESC button or ignore 
the message to exit the Reset All function without changing any 
settings. 
Interactive  Projector             
4.ADVANCE 
Zoom/pan execute Execute digital zoom and pan function 
Still on/off Freezes the current image on the screen. 
Blank on/off Hide the image, displays a blank, black screen*(see below) 
Reset all execute Resets all OSD Menu function to their factory default 
values*( see below) 
Resize 4:3/16:9 Select the image size 
Language English Select the language that the OSD Menu and on screen 
massage are display in English / Chinese(s) / Chinese(t) / 
Italian / Spanish / French / German / Korean / Polish 
Select source execute Select the input source from: 
Computer 1 / Computer2 (RGB or YPbPr) / Video / S-Video 
1/21/2008  
						

							
-63- 
Interactive  Projector             
5.PRESENTATION 
Auto ceiling off/on Automatically inverts the image when the projector 
is turned upside down i.e. when the projector is 
mounted on the ceiling 
Front execute Normal projection mode 
Ceiling execute Inverts the image vertically, used when the 
projector is mounted upside down 
Rear execute Inverts the image horizontally, used when 
projecting onto a rear projection screen 
Ceiling and 
Rear
execute Inverts the image horizontally and vertically, used 
when the projector is mounted upside down and 
projecting onto a rear projection screen 
Auto Brightness off/on  Auto detects brightness; it turns to economic mode 
automatically when the brightness is low.  
Lamp mode 
(some model doesn’t have this mode) 
normal
economic
Economic mode reduces the lamp brightness 
economic to extend lamp life and quiet the 
projector 
Lamp    Show Lamp timer 
Reset lamp timer 
(optional)
execute After changing a new lamp,execute this function 
for reset the Lamp timer.(see below) 
1/21/2008