Boxlight Pro5000sl Projector User Manual

11
Setting up
Using the Hiding-Styled Handle
Refer to the picture operation direction to 
pull the handle.
 
NOTE ►This handle is designed to carry the projector for short distance only.
►Please do not have added on other goods to use together, it can damage 
the projector.
Hiding-Styled Handle 

12
Putting batteries
Remote control
Please set the batteries to the remote control before using it. If the remote control starts
to malfunction, try to replace the batteries. If you will not use the remote control for long 
period, remove the batteries from the remote control and store them in a safe place. 
1.Remove the battery cover.
    Slide back and remove the battery cover in the 
    direction of the arrow.
2.Insert the batteries.
    Align and insert the two AAA batteries according 
    to their...

13
Remote control
Using as a simple PC mouse & keyboard
The enclosed remote control works as a 
simple mouse and keyboard of the PC, 
when the projectors USB port connects 
with the PCs mouse port via a mouse 
cable.(SEE P4) 
CAUTION ►Improper use of the simple mouse & keyboard function could 
damage your equipment. While using this function, please connect this 
product only to a PC. 
About the remote control signal
1.The remote control works with the 
     projector’s remote sensor. This...

14
Turning on the power
Power on/off
Turning off the power
1.Make sure that the POWER indicator 
    turns in steady green and the lens 
    cover is removed.
2.Press the STANDBY/ON button on 
    the projector or the remote control.
3.The projection lamp will light up, 
     the LAMP indicator will not light in 
     red and the POWER indicator will 
     begin light in green.
To display the picture, select an input 
signal according to the section 
“Selecting an input signal” (SEE 15). 
WARNING►A...

15
1.Press the VOLUME button on the remote control.
    A dialog will appear on the screen to aid you in 
    adjusting the volume.
2.Use the +/- cursor buttons to adjust the volume.
    To close the dialog and complete the operation, 
    press the MENU button and the menu will 
   disappear after a few seconds.
1.Press the MUTE button on the remote control. 
    A dialog will appear on the screen indicating 
    that you have muted the sound.
2.If you do not do anything, the dialog will...

VideoPC
16
Operating
YPbPr  
COMPOSITE VIDEO
MENU
MENU  BUTTON 
Searching an input signal
1.Please Press the MENU button on the 
     projector or remote control.
2.After you can use the     cursor button
    to chiose [ ON ]  in the AUTO SEARCH 
    item of the SETTING menu. 
The projector will start to check its input 
ports in order to find any input signals.
When an input is found, the projector 
will stop searching and display the 
image. If no signal is found, the projector will 
return to the...

17
Operating
Adjusting the zoom and focus
Adjusting the image position
When the place to put the projector is slightly uneven to the left or ri\
ght, use the 
feet to place the projector horizontally. Using the feet can also tilt t\
he projector in 
order to project at a suitable angle to the screen.
This projector has 2 feet and 2 knobs. 
A foot is adjustable while pulling up the knob on the same side as it.
1.Holding the projector, pull the knobs up to loose the feet.
2.Position the front side of the...

VideoPC
18
Operating
Correcting the keystone distortions
1.Please Press the MENU button on the projector or remote control.
2.After you can use the    /► cursor button to select  the KEYSTONE  V item of 
     the SETTING menu and press the    /► button for keystone adjustment.
(1)The KEYSTONE  V item will displays a dialog for keystone correction.
(2)To close the dialog and complete this operation, press the MENU button ag\
ain. 
     The dialog will automatically disappear after a few seconds if you do...

VideoPC
VideoPC
19
Operating
1.Press the Still button on the remote control. 
    The [ Still ] indication will appear on the screen and the 
     projector will go into the Still mode.
 To exit the still mode and restore the screen to normal, press 
the still button again.
If the projector continues projecting a still image for a long time, 
the LCD panel might possibly be burned in. Do not leave the 
projector in the Still mode for too long.  
1.Press the Blank button on the projector or remote...

VideoPC
20
Operating
Using the menu function
This projector has the following categories: 
ADVANCED, AUDIO, INPUT, PICTURE, PRESENTATION,SETTING and 
SECURITY. ADVANCED MENU consists of functions often used, and the 
other menus are classified into each purpose. Each of these menus is operated 
using the same methods. The basic operations of these menus are as follo\
ws.
1.Press the MENU button on the remote control 
     or the projector.The MENU button on the 
     projector works as the cursor...