Boxlight Fp-95t Users Guide

51
SETTING
DISPLAY MAIN MENU DISPLAY 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select SETTING and press the SELECT (REAR CLICK) BUTTON.
Another dialog box SETTING DISPLAY will appear.
3. Press the POINT DOWN BUTTON and a red arrow will appear.
4. Move the arrow to an item you want to set by pressing the POINT UP/DOWN BUTTON(s).
5. If you want to change the setting, press the SELECT (REAR CLICK) BUTTON.
6. To quit the MENU, point...

52
MAIN MENU DISPLAY
SETTING
DISPLAY The Lamp age function is designed to reset the lamp replacement monitor timer. When replacing the lamp, reset the lamp
replacement monitor timer by using this function.
NOTE:Do not reset the LAMP REPLACEMENT MONITOR TIMER, except after the lamp is replaced.
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select SETTING and press the SELECT (REAR CLICK) BUTTON.
Another dialog box SETTING DISPLAY will...

53
The removable air filter prevents dust from accumulating on the surface of the projection lens and projection mirror. Should
the air filter become clogged with dust particles, it will reduce the cooling fans effectiveness and may result in internal heat
build up and reduce the life of the projector.
To clean the air filter, follow the cleaning procedures below:
1. Turn the POWER ON/OFF button OFF.
2. Remove the air filter cover.
3. Remove the air filter and sponge from the filter cover.
4. Clean the...

54
Follow these steps to replace the lamp assembly.
1. Turn off the projector and allow the projector to cool thoroughly.
2. Disconnect the AC cord from the projector.
3. Remove  2 screws with a screwdriver and remove the lamp cover.
4. Remove 2 screws with a screwdriver and pull out the lamp assembly by
grasping the handle.
5. Replace the lamp assembly.
6. Tighten 4 screws to secure the lamp cover to the lamp assembly.
7. Connect the detachable AC cord to the projector.
8. Reset the lamp replacement...

Problem:
No power.
Image is out of focus.
Try these Solutions:
lPlug the projector into an AC outlet.
lTurn the MAIN ON/OFF switch to ON.
lPress the POWER ON/OFF switch to ON.
lBe sure the READY INDICATOR light is ON.
lWait one minute after the projector is turned OFF before turning the projector
back on.
NOTE: After pressing the POWER ON/OFF button to OFF. The projector functions
as indicated.
1. The LAMP POWER indicator will light and the READY indicator will turn off.
2. After one minute, the READY...

No sound.
56
Problem:
Check Reverse L/R feature.
(See OTHER FUNCTION SETTING section on pages 50 ~ 51).Picture is L/R Reversed.
Check Reverse T/B feature.
(See OTHER FUNCTION SETTING section on pages 50 ~ 51).Picture is T/B inverted.
Check Display feature.
(See OTHER FUNCTION SETTING section on pages 50 ~ 51).Some displays are not seen
during the operation.
lCheck audio cable connection from audio input source.
lAdjust audio source.
lPress the VOLUME (+) button.
lPress the MUTE button.
lCheck the...

57
TECHNICAL SPECIFICATIONS
Projector Type
Dimensions (W x H x D)
Net Weight
LCD Panel System
Number of Pixels
Color System
Scanning Frequency
Projection Image Size (Diagonal) 
Horizontal Resolution
Projection Lens
Motorized Lens Shift
Throw Distance
Projection Lamp
AV Input Jacks
Computer Audio Input JackVideo Monitor Output Jack
Audio Monitor Output Jacks
Computer Input 1 Jack
Computer Input 2 Jack
Other Jack
Built-in Speaker
Image Elevation Adjustment
Voltage
Power Consumption
Operating Temperature...

Printed in Japan
Part No. 610 281 4019 (1AA6P1P2024-- M6VE)
LIMITED WARRANTY
BOXLIGHT CORPORATION (BOXLIGHT) warrants that each Boxlight FP-95t (the Product) sold hereunder will
conform to and function in accordance with the written specifications of BOXLIGHT. Said limited warranty shall apply only
to the first person or entity that purchases the Product for personal or business use and not for the purpose of distribution
or resale. Said warranty shall continue for a period of two (2) years from the date...