Boxlight Fp-95t Users Guide

41
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.
(kHz)V-Freq.
(Hz)
Specifications are subject to change without notice.
NOTE:Basically this projector can accept the signal from all computers with the above mentioned V, H-Frequency and
less than 200 MHz of Dot Clock.
COMPUTER MODE
COMPATIBLE COMPUTER SPECIFICATIONS
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 960
1152 x 900
1152 x 900
1280 x 1024
1280 x 1024
1280 x...

42
AUTO IMAGE SETTING
DISPLAYMAIN MENU DISPLAY The Auto image function is provided to automatically adjust Fine sync., Total dots and Screen position for most computers.
NOTE: This auto image function will be skipped when the incoming signal is digital.
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select AUTO IMAGE and press the SELECT (REAR CLICK) BUTTON.
Another dialog  box AUTO IMAGE SETTING DISPLAY will appear.
3. Press the...

43
IMAGE ADJUST 
DISPLAY
TABLE OF PICTURE IMAGE ADJUSTMENT
WHITE BALANCE (R/G/B)
CONTRAST
BRIGHTNESS
0127
63
63 0
63
0
0 TOTAL DOTS FINE SYNC
The number of the total dots in one horizontal period. Adjust the
number to match your PC image. Adjust the picture as necessary to eliminate
flicker from the display.
LIGHTERDEEPER DECREASE INCREASE
DARKER BRIGHTERMAIN MENU DISPLAY
NOTE:
The projector may not reproduce a proper
image for some UXGA signals.
Since UXGA (1600 x 1200) image is
converted to SXGA (1280...

44
POSITION SETTING
DISPLAYMAIN MENU DISPLAY 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select POSITION and press the SELECT (REAR CLICK) BUTTON.
Another dialog box POSITION SETTING DISPLAY will appear.
3. Press the POINT DOWN BUTTON and a red arrow will appear.
4. Move the arrow to a desirable direction ( ,  ,  or  ) by pressing the POINT LEFT/RIGHT/UP/DOWN
BUTTON(s) and press the SELECT (REAR CLICK) BUTTON to a desirable picture...

45
MAIN MENU DISPLAY This projector can automatically detect most display signals from most personal computers currently distributed. However,
some computers adopt a special signal format which is different from the standard one and the projector cannot detect it. If
this happens, the projector cannot reproduce a proper image. And a flickering picture, a non-synchronized picture, a non-
centered picture or a skewed picture may be projected instead.
For those non-standard formats, this projector is...

OK ?
Ye s
No630
1056
47
4
1
46
ITEM
TOTAL LINES
TOTAL DOTS
HORIZONTAL
VERTICALFUNCTION
The number of the total vertical lines. Adjust the number to match your PC image.
The number of the total dots in one horizontal period. Adjust the number to match your PC image.
Adjustment of the horizontal picture position. When the image is not centered on the screen, adjust this.
Adjustment of the vertical picture position. When the image is not centered on the screen, adjust this.
PC ADJUSTMENT
DISPLAY 1MAIN MENU...

XGA 1
47
ITEM
CLAMP
DISPLAY AREA
HORIZ. SCALEFUNCTION
Adjustment of the clamp level. When the image has a dark bar, try this adjustment.
Expanding or compressing level for the vertical direction. Expanding or compressing level for the horizontal direction.PC ADJUSTMENT
DISPLAY 2MAIN MENU DISPLAY 17. Another dialog box PC ADJUSTMENT DISPLAY 2 will appear and the parameter data for the Mode you have selected
is shown in this dialog box.
18. Move the arrow to an item that you want to adjust by pressing the...

OK ?
Ye s
No630
1056
47
4
Stored1
Stored
48
MAIN MENU DISPLAY
PC ADJUSTMENT
DISPLAY
MODE FREE
The Mode free function is provided to confirm or clear the parameter data produced by PC ADJUST.
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select PC ADJUST and press the SELECT (REAR CLICK) BUTTON.
Another dialog box Where to reserve will appear.
3. Press the POINT DOWN BUTTON and a red arrow will appear.
4. Move the arrow to one of the...

49
This projector can adjust the image size and pan the image with PICTURE SCREEN ADJUSTMENT.
1. Press MENU BUTTON and MAIN MENU DISPLAY dialog box will appear.
2. Press POINT LEFT/RIGHT BUTTON(s) to select SCREEN and press the SELECT (REAR CLICK) BUTTON.  Another
dialog box SCREEN ADJUST DISPLAY will appear.
3. Press POINT DOWN BUTTON and a red arrow will appear.
SCREEN ADJUST
DISPLAYMAIN MENU DISPLAY
4. To adjust the image size or pan the image, move the arrow to Digital zoom by
pressing POINT UP/DOWN...

This Projector is designed for connecting with USB Port of the computer or peripheral equipment that is to be standard.
When this function is in the   (Mouse) position, you control the pointer of the computer used the projectors
wireless remote control unit.
When this function is in the   (Control) position, you control the projector by computer.
NOTE:Before you control the projector by computer, install USB driver (optionally soled parts) and set up the computer
following instruction in the USB driver...