Boxlight Fp-95t Users Guide
Here you can view all the pages of manual Boxlight Fp-95t Users Guide. The Boxlight manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
21 VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO RL(MONO)AUDIO VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO RL(MONO)AUDIO VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO RL(MONO)AUDIO VIDEO IN-1 VIDEO IN-2 MONITOR OUT VIDEO EQUIPMENT Video Cassette RecorderDVD Player Video Disc PlayerSatellite TV Tuner MONITORAUDIO INPUT AUDIO OUTPUT S-VIDEO OUTPUT S-VIDEO INPUT SPEAKERSAUDIO AMP. Video Camera Y OUTPUT (BNC) VIDEO OUTPUT (BNC)C OUTPUT (BNC)Cb (B-Y) OUTPUT (BNC)Cr (R-Y) OUTPUT (BNC) Y INPUT (BNC) VIDEO INPUT (BNC)C INPUT (BNC)Cb (B-Y)...
Page 22
22 MEMU MODE AUTO IMAGE NORMAL SELECTVOLUME ZOOM FOCUS LENS SHIFT ON-OFF 5 697 12 11 10 13 14 8 15 TOP CONTROLS FRONT INDICATORS FRONT INDICATORS TOP CONTROLS READYLAMP LAMP REPLACEWARNING TEMP. 1234 BEFORE OPERATION CONTROLS AND INDICATORS
Page 23
23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 LAMP REPLACEMENT INDICATOR Light is orange when the Lamp life draws to an end. TEMPERATURE WARNING INDICATOR Flashes red when internal projector temperature is too high. READY INDICATOR Light is green when projector lamp is ready to be turned on. LAMP POWER INDICATOR Light is dim when the projector is on. Light is brightened when the projector is in stand-by mode. VOLUME BUTTONS Used to adjust volume. ZOOM BUTTONS Used to operate power zoom lens. FOCUS BUTTONS Used...
Page 24
LASER POINTER button This remote control emits a laser beam light as the Laser Pointer from the Laser Light Window. When the LASER POINTER button is pressed, laser light goes on: when the button is released, light goes off. Laser light is emitted with the RED light which tells the laser beam being emitted. The laser emitted is a class laser; therefore, do not look into the laser light window or shine the laser beam on yourself or other people. The three marks to the right are the caution labels for the...
Page 25
25 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 COMPUTER SELECT BUTTON Used to select computer mode. (Computer 1 or Computer 2 Input) VIDEO SELECT BUTTON Used to select video mode. (Video 1 or Video 2 Input) POWER ON/OFF BUTTON Used to turn the projector on or off. VOLUME BUTTONS Used to adjust volume. ZOOM BUTTON Used to select power zoom lens adjust. P-TIMER BUTTON Used to operate the P-TIMER function. FOCUS BUTTON Used to select focus adjust. FREEZE/NO SHOW BUTTON Used to freeze on-screen image or change the...
Page 26
26 Remote Control Battery Installation Using the Remote Control Unit 16.4 (5 m) 60° 60° 1 Remove the battery compartment lid. 2 Slide the batteries into the compartment. 3 Replace the compartment lid. Note :For correct polarity (+ and - terminal), be sure the battery terminals are in contact with the pins in the compartment. Point the remote control toward the projector (Receiver window) whenever pressing the buttons. Maximum operating range for the remote control is about 16.4 (5m) and 60° front and...
Page 27
WIRED REMOTE JACK When using the wired remote control, connect the remote cable to this jack. COMPUTER SELECT BUTTON Used to select computer mode. (Computer 1 or Computer 2 Input) VIDEO SELECT BUTTON Used to select video mode. (Video 1 or Video 2 Input) POWER ON/OFF BUTTON Used to turn projector on or off. VOLUME BUTTONS Used to adjust volume. ZOOM BUTTONS Used to operate power zoom lens. FOCUS BUTTONS Used to operate power focus system. SOUND MUTE BUTTON Used to mute sound. LENS SHIFT BUTTONS Used to...
Page 28
28 60° R/C JACKSERIAL PORT OPENOPEN Connect a remote control cable to R/C jacks located on the wireless/wired remote control unit and the side of the projector. 60° The remote control unit can be used as wireless or wired remote control. WIRED REMOTE CABLE 1 Remove the battery compartment lid. 2 Slide the batteries into the compartment. 3 Replace the compartment lid. Note :For correct polarity (+ and - terminal), be sure the battery terminals are in contact with the pins in the compartment. Point the...
Page 29
ADJUST ITEM 29 The projector has two types of operation: DIRECT OPERATION and MENU OPERATION. DIRECT OPERATION allows you to operate the projector by using one button without showing the MENU. In MENU OPERATION mode, you display menus where you can adjust the projectors settings. Follow the instruction for each control. DIRECT OPERATION WIRELESS/WIRED REMOTE CONTROLWIRELESS REMOTE CONTROL POWER ON/OFFPOWER ON-OFF POWER ON-OFF POWER ON-OFF MODE COMPUTER VIDEOCOMPUTER VIDEO VOLUME (+) and (–) VOLUME (+)...
Page 30
COLOR SYSTEM WIRELESS REMOTE CONTROL WIRELESS REMOTE CONTROL ADJUST ITEM MODE SELECTWIRELESS REMOTE CONTROL SOUND SOUND VOLUME TREBLE BASS BUILT-IN SP. SOUND MUTE WIRELESS/WIRED REMOTE CONTROL MENU POINT LEFT/RIGHT SELECT POINT UP/DOWN SELECTMENU POINT LEFT/RIGHT SELECT POINT UP/DOWN SELECTMENU POINT (LEFT/RIGHT) SELECT (REAR CLICK) POINT (UP/DOWN) SELECT (REAR CLICK) TOP CONTROL OF THE PROJECTOR 30 1. COMPUTER/VIDEO MODE 2. VIDEO MODE MENU OPERATION ADJUST ITEMWIRELESS/WIRED REMOTE CONTROL LANGUAGE...