Boxlight Boston Series User Manual

79 
Network Control Software Application  
 
  ITEM SETTING DESCRIPTION Basic Projector Name Show projector name on the current projector. 
Power Power On or Power Off the projector via network. Input Source Select input source. Picture Brightness Adjust the image brightness level. Contrast Adjust the image contrast level. Sharpness Adjust the image sharpness. Color Adjust the strength of whole color. This function can only be used under Video signal, S-Video signal, or component video signal input. Tint...

80 
Network Control Software Application  
 
 
Network : Set up network configuration and password from this page.   
  
 
 
ITEM SETTING DESCRIPTION 
Network 
DHCP Assign an IP address to the projector from the DHCP server automatically. 
IP Address Set up IP Address when DHCP is disabled. 
Subnet Mask Set up Subnet Mask when DHCP is disabled. 
Gateway Set up Gateway when DHCP is disabled. 
DNS Server Set up DNS Server address when DHCP is disabled. 
Group Name Create projector group (Max length: 14...

81 
Network Control Software Application  
 
 
Alert: Show and setup Alert configurations. 
  When problem occurs to the projector, it will automatically send e-mail to remind user. 
How to operate: 
1. Enter Email Setting columns. 
2. Enter SMTP Setting columns. 
3. Select Alert Condition. Multiple choices are fine. 
4. Press Submit to confirm. 
5. After completing Alert Setting for the first time, it is recommended that you press Issue Test Mail to 
see if the attendees can receive the e-mail.  If the...

82 
Network Control Software Application  
 
 
 
 
Schedule : Show and set up Schedule, including Weekly Schedule and Specific Day. 
 Weekly Schedule    
   
   
   
   To power on and power off projector based on Weekly Schedule. 
How to set up: 
1. Choose week days. 2. Set up power-on or power-off time. (Be sure that the interval between power-on and off setting is more than 5 minutes.) 3. Enter Input Source and select input source. 4. After completing setting, press ADD to confirm. 5. To cancel items,...

83 
 
 
 
 
BNeeftowreorUkseControl Software Application 
 
Time :   
   
   
   
   
 
1. Current System Time Setting: Refresh the date/time on the webpage if you click  
“Refresh” button.  
2. System Time Setting : To set the date/time manually  
Enter the Date in Month/Day/Year format. 
Enter the Time in Hour/Minute/Second format. 
3. Click the “Submit” button to save your setting.  
Creston: Projectors detailed setting from Creston.   
 
  

84 
 
 
NB etowroe rUkseControl Software Application   ITEM SETTING DESCRIPTION 
Power Power On or Power Off the projector via network. 
Vol + (Volume +) Adjust the volume up. 
Vol + (Volume -) Adjust the volume down. 
Mute Mute the volume OFF / ON. 
Source List Select input source. RGB1 RGB2 HDMI/DVI VIDEO S-VIDEO USB 
Brightness Adjust the image brightness level. 
Contrast Adjust the image contrast level. 
Color Adjust the strength of whole color. This function can only be used under Video signal,...

85 
 
 
BNeeftowreorUkseControl Software Application 
  1. Click  button to leave this page. 2. Creston Control 
Projector Name: 
Displays the projector name used to identify the projector when connected to a network. 
When editing, you can enter up to 14 single-byte alphanumeric characters. 
Location: 
Show the location where the projector is. When editing, you can enter up to 14 single- 
byte alphanumeric characters. 
Assigned To: 
Displays the name used to identify who the projector is assigned to b y...

86 
 
 
 
  
 
NB etowroe rUkseControl Software Application 
  
About the “Info” button: Show current projector status from this page. Press exit button to leave this page.  
  Click  button to leave this page. 
 
About the “Contact IT Help”:  
  Click to close Contact IT Help window dialog. 
Click to send the message to Creston‟s device and projector. 
 
Logout: logging out of the projector network control.  
  

87 
Maintenance of Projector  
Air Filter 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
When a warning message appears to remind you to clean the air filter, replace a new 
one as soon as possible. Check and clean the air filter periodically. 
 
Replacing the Air Filter 
When the use time reaches the filter counter time, the projector will display a message 
that indicates to replace a new filter. If there is no spare air filter available, contact your 
dealer. 
 
   
   
 
Up    
   
   
   
   New one    
 
Turn off...

88
Lamp
1.  If you want to replace new lamp, but the projector was just turned off, please let the 
projector cool down and unplug power cord at least 60 minutes.
2.  If the projector is mounted in the ceiling, contact your dealer to repla\
ce the lamp.
Replacing New Lamp
1. Remove the lamp door.
2.  Loosen 2 screws of the lamp holder. Take the handle on the top of the lamp, pull out 
the lamp straight off the projector.
3. Insert new lamp, lock the lamp door firmly with 2 screws.
4. Put the lamp door...