Boxlight Boston Series User Manual

							79 
Network Control Software Application  
 
  ITEM SETTING DESCRIPTION Basic Projector Name Show projector name on the current projector. 
Power Power On or Power Off the projector via network. Input Source Select input source. Picture Brightness Adjust the image brightness level. Contrast Adjust the image contrast level. Sharpness Adjust the image sharpness. Color Adjust the strength of whole color. This function can only be used under Video signal, S-Video signal, or component video signal input. Tint Adjust the image tint. This function can be used under Video signal, S-Video signal, or component video signal. Display Mode Adjust Natural/Cinema/Daylight/Green Board/White Board/Black/User Mode. Audio Volume Adjust the volume. Mute Mute the volume OFF / ON. Setting Keystone Manually correct vertical keystone distortion in image. Auto Sync Set all of the above setting automatically. (This function can only be used under PC mode) Auto Search Search signal source manually or automatically. Advanced Blank Blank the current image on the screen Blank Power Off No / 15 / 30 / 60 (minutes) Freeze Freeze the current image on the screen. Resize 4:3,16:9, 1:1, 16:10 Reset All Reset all menu function to their factory default values. Presentation Projection Select Front/Ceiling/Rear/Ceiling and Rear Lamp Mode Switch lamp mode between Powerful or Normal mode.  
						

							80 
Network Control Software Application  
 
 
Network : Set up network configuration and password from this page.   
  
 
 
ITEM SETTING DESCRIPTION 
Network 
DHCP Assign an IP address to the projector from the DHCP server automatically. 
IP Address Set up IP Address when DHCP is disabled. 
Subnet Mask Set up Subnet Mask when DHCP is disabled. 
Gateway Set up Gateway when DHCP is disabled. 
DNS Server Set up DNS Server address when DHCP is disabled. 
Group Name Create projector group (Max length: 14 characters). 
Projector Name Create projector naming of the current projector (Max length: 14 characters). 
Password 
Administrator Turn ON/OFF administrative password function. Administrator mode can control the conditions on web. 
New Password Enter administrative password (Max length: 15 characters). 
Confirm Password Re-enter administrative password.  
						

							81 
Network Control Software Application  
 
 
Alert: Show and setup Alert configurations. 
  When problem occurs to the projector, it will automatically send e-mail to remind user. 
How to operate: 
1. Enter Email Setting columns. 
2. Enter SMTP Setting columns. 
3. Select Alert Condition. Multiple choices are fine. 
4. Press Submit to confirm. 
5. After completing Alert Setting for the first time, it is recommended that you press Issue Test Mail to 
see if the attendees can receive the e-mail.  If the attendees cannot receive the e-mail, please check if 
the setting is correct or not.  If you have questions with the Alert Setting, please contact your network 
service provider. 
 ITEM SETTING DESCRIPTION Email Setting  To Set up the mail alert attendee (Max length: 40 characters). Cc Set up the backup mail alert attendee (Max length: 40 characters). Subject Set up the subject of the alert e-mail (Max length: 40 characters). From Set up the sender e-mail address (Max length: 40 characters). SMTP Setting  Server To enter the SMTP server  (Mail  server)  name of the company  or IP Address (Max length: 40 characters). User Name Enter the sender‟s e-mail address (Max length: 40 characters). For example: [email protected] Password Enter password of the sender‟s e-mail account (Max length: 15 characters). Alert Condition  Fan Lock The cooling fan is not operating. Over Temperature The projector internal is over heated. Lamp fail The lamp does not light up. 
Lamp Time Alert Lamp has reached its life time. Suggest changing the lamp. Lamp Cover Opened Lamp Cover does not close well. Filter Time Alert Filter has reached its life time. Suggest cleaning the filter.  
						

							82 
Network Control Software Application  
 
 
 
 
Schedule : Show and set up Schedule, including Weekly Schedule and Specific Day. 
 Weekly Schedule    
   
   
   
   To power on and power off projector based on Weekly Schedule. 
How to set up: 
1. Choose week days. 2. Set up power-on or power-off time. (Be sure that the interval between power-on and off setting is more than 5 minutes.) 3. Enter Input Source and select input source. 4. After completing setting, press ADD to confirm. 5. To cancel items, select the item and press Cancel button. 
 
Specific Day  
Based on Specific Day to set up power-on and power-off time. 
How to set up: 
1. Choose power-on days and time. 2. Choose power-off days and time. (Be sure the setting period between power-on time and off time is greater than 5 minutes.) 3. Enter Input Source and select input source. 4. After completing setting, press ADD to confirm. 5. To cancel items, select the item and press Cancel button.  
						

							83 
 
 
 
 
BNeeftowreorUkseControl Software Application 
 
Time :   
   
   
   
   
 
1. Current System Time Setting: Refresh the date/time on the webpage if you click  
“Refresh” button.  
2. System Time Setting : To set the date/time manually  
Enter the Date in Month/Day/Year format. 
Enter the Time in Hour/Minute/Second format. 
3. Click the “Submit” button to save your setting.  
Creston: Projectors detailed setting from Creston.   
 
  
						

							84 
 
 
NB etowroe rUkseControl Software Application   ITEM SETTING DESCRIPTION 
Power Power On or Power Off the projector via network. 
Vol + (Volume +) Adjust the volume up. 
Vol + (Volume -) Adjust the volume down. 
Mute Mute the volume OFF / ON. 
Source List Select input source. RGB1 RGB2 HDMI/DVI VIDEO S-VIDEO USB 
Brightness Adjust the image brightness level. 
Contrast Adjust the image contrast level. 
Color Adjust the strength of whole color. This function can only be used under Video signal, S-Video s i g n a l, or component video signal input. 
Sharpness Adjust the image sharpness. 
ZOOM Zoom in/Zoom out and Pan. 
Menu Display or hide the OSD main menu. 
UP/Down buttons Use UP/Down buttons to select an item. 
Left/Right buttons Use left/right buttons to select a n  item or adjust the value. 
Source RGB1->RGB2->HDMI->USB->Video->S-Video->RGB1. 
Enter Use Enter buttons to select an item. 
Auto Automatically adjust the setting to match the current input. 
Blank Blank the projected image. The time of Blank mode can be set in 15 minutes, 30 minutes or 60 minutes. The projector will shut down automatically  after passing each set time. 
 
About the Tools button:   Set up network configuration, projector network web browser login password and set projector name 
from this page.  
  
						

							85 
 
 
BNeeftowreorUkseControl Software Application 
  1. Click  button to leave this page. 2. Creston Control 
Projector Name: 
Displays the projector name used to identify the projector when connected to a network. 
When editing, you can enter up to 14 single-byte alphanumeric characters. 
Location: 
Show the location where the projector is. When editing, you can enter up to 14 single- 
byte alphanumeric characters. 
Assigned To: 
Displays the name used to identify who the projector is assigned to b y  someone 
who can manage a network. 
When editing, you can enter up to 14 single-byte alphanumeric characters. 
Click  button to send and save the setting that you modify. 
 
Projector’s Network Configuration 
DHCP Enabled A s s ign an IP a d d r es s to the p r o j e c t or f r om the D H CP s e r v e r  
automatically. 
IP Address Set up IP Address when DHCP is disabled. 
Subnet Mask Set up Subnet Mask when DHCP is disabled. 
Gateway Set up Gateway when DHCP is disabled. 
DNS Server Set up DNS Server address when DHCP is disabled. 
Click   button to send and save the setting that you modify. 
 
Admin Password 
Enabled Turn ON administrative password function if selected. 
New Password Enter administrative password (Max length: 15 characters). 
Confirm 
Password 
Re-enter administrative password. 
Click   button to send and save the setting that you modify. 
 
User Password 
Enabled Turn ON User password function if selected. 
New Password Enter administrative password (Max length: 15 characters). 
Confirm 
Password 
Re-enter administrative password. 
Click   button to send and save the setting that you modify.  
						

							86 
 
 
 
  
 
NB etowroe rUkseControl Software Application 
  
About the “Info” button: Show current projector status from this page. Press exit button to leave this page.  
  Click  button to leave this page. 
 
About the “Contact IT Help”:  
  Click to close Contact IT Help window dialog. 
Click to send the message to Creston‟s device and projector. 
 
Logout: logging out of the projector network control.  
  
						

							87 
Maintenance of Projector  
Air Filter 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
When a warning message appears to remind you to clean the air filter, replace a new 
one as soon as possible. Check and clean the air filter periodically. 
 
Replacing the Air Filter 
When the use time reaches the filter counter time, the projector will display a message 
that indicates to replace a new filter. If there is no spare air filter available, contact your 
dealer. 
 
   
   
 
Up    
   
   
   
   New one    
 
Turn off the projector, and unplug the power cord. Allow the projector to sufficiently 
cool down.  
 Remove the filter cover from the right side of projector. 
 Pull out the air filter. 
 Install a new air filter. 
 Put the filter cover on. 
 Reset filter timer after cleaning or changing air filter (P. 71).  
						

							88
Lamp
1.  If you want to replace new lamp, but the projector was just turned off, please let the 
projector cool down and unplug power cord at least 60 minutes.
2.  If the projector is mounted in the ceiling, contact your dealer to repla\
ce the lamp.
Replacing New Lamp
1. Remove the lamp door.
2.  Loosen 2 screws of the lamp holder. Take the handle on the top of the lamp, pull out 
the lamp straight off the projector.
3. Insert new lamp, lock the lamp door firmly with 2 screws.
4. Put the lamp door on.
5. Please reset the lamp timer after replacing lamp. (P.69)
Maintenance of Projector