Boxlight Boston Series User Manual

							49 EZ Suite

(Setting&Configuration)  
    
AP  mode (Ad Hoc):  
   
 
Select the   button, then press the ENTER button on the remote control 
to go to set 
some parameters for being enabled under  AP mode.    
 
 
► These settings are only for basic wireless parameters. If you are going  to modify these 
wireless parameters, the visual keyboard will  pop
-up on the screen. Press the , 
,  or  buttons  to select a character on the visual keyboard, and press the ENTER 
button  to key  in the character. Press ESC button  to quit the setting,  it
 can  help you to 
configure your setting.   
						

							50 EZ Suite

(Setting&Configuration)  
     
SSID (Service Set Identification):  The same name of SSID must be assigned  to wireless 
devices  in your network. Considering your wireless 
network security,  the default SSID is  set to be  “rtwap”.  
 
  Security:  you can configure the security settings of your wireless network.  
 
There are three wireless security modes supported by the Router: Open, WPA2 
and WP A. 
Open  – it
 means no security settings of this wireless network.  
 
The default setting  is automatic that based on the wireless stations capability 
and request.  
WPA (default) and WPA2  – It ‟s the WPA/WPA2 authentication type.  
 
 
PSK (Pass-Key):  You can enter a key-code.  
 
 
Channel:  This field determines which operating frequency will be used. It is not 
necessary  to change the wireless channel unless you notice interference 
problems with another nearby access point.  
 
  Auto:  The default setting  is automatic, which  can adjust the channel width for your 
clients automatically.  
 
  V  : press the ENTER button  to enable  AP mode, then press the ESC button on the 
remote control  to quit  AP mode setting page.  
 
  X:  abort the setting, or you can press the ESC button on the remote control  to quit setting.   
						

							51 EZ Suite

(Setting&Configuration)  
    
Client mode:  
 
When wireless clients survey the local area for wireless networks to associate with, they 
will detect the SSID broadcast by the Router. The SSID of the  AP your Router  is going to 
connect  to as a client.  
   
 
Select the   button and press ENTER button on the remote control for starting Client 
mode.  
 
Press the  button on the remote control  to go to the items  in SSID. The visual 
keyboard will  pop up on the screen  if select a SSID name and ask you PSK(pass-key) for 
connecting. Press the  ,  , or  ENTER buttons on the visual keyboard to 
key-in the PSK entry that should be chosen according to the APs security configuration.  
    
						

							52  
 
EZ
 
Suite (Setting&Configuration ) 
 
 
   
   
 
 
Press the  to connect to as a client. 
						

							53 
EZ Suite(Setting&Configuration)  
 
 
 
 
  
Connect successfully. 
 
 
 
 
Select , then press the ENTER button on the remote control to detect the SSID 
broadcast with the router again.  
						

							54 
EZ Suite(Setting&Configuration)  
 
 
EZ Display:  
Main functions:  
- View MS-Office files (Word, Excel, PowerPoint), Adobe PDF,  
Apple iWorks (Pages, Numbers, Keynote). It also supports Sketch function and saves 
to photo roll.  
- View local photo gallery and do sketch  
- Display Web pages and support sketch function as well  
- Link your Dropbox storage and view the documents stored on it. 
 
 
1. Open App store to download the app which is EZ display. 
 
  
2.  Configuring the Projectors Wi-Fi:  
EZ Display can support AP mode and Client mode.  
AP mode:  
Set the AP mode parameters at \..\settings\WiFi\AP mode\.  
See „WiFi settings‟ (Page 50) for more information to set parameters. 
 
 
Connects directly to a projector.  
						

							55 
EZ Suite(Setting&Configuration)  
 
 
 
 
Client mode:  
Set the client mode parameters at \..\settings\WiFi\Client mode\.  
See „WiFi settings‟ (Page 52) for more information to set parameters.     
   
 
Connects through a wireless LAN router..  
►Note:  
Compatible Devices:  
Application Compatible Devices Compatible OS 
version 
EZ display - iPhone 4 and iPhone 4S 
- iPad 2, and New iPad (gen 3 iPad) 
iOS 5.1.1 or later  
						

							56   
 
E=6XLWH6HWWLQJ	
Configuration)
 
 
3.6 Connect PC Setting  
 
Connect PC for accessing internal memory.  
 
1.   Connect the computers USB port  to the projectors USB (mini-USB) port via the  
 
USB cable.  
 
2.   Computer ‟s system will examines newly discovered removable media and devices.  
   
 
 
3.   Projector will display the connecting message on the screen.  
 
4. Click and execute Open folder to view files,  it
 can access the internal memory from  
 
the projector.  
 
●  Remove connecting Internal Memory.  
 
Press the  “ESC” button on the remote control  to exit communication process with 
computer, and then remove mini-USB cable from the projector and computer.   
						

							57 
Menu Operation  
 
 
 
 
How To Operate On-Screen Display  
1. Press Menu button. It will be shown blue main menu. The 
first main menu is  PICTURE menu.  
2. Choose which item you want to enter, you could press up / down /left/ 
right button of control panel or remote control to adjust item or value. 
  
   
  
 007   
   
   
 
 
Up / Down / Right / Left button 
 
 
   
Menu button  
						

							58 
MENU (PC Mode)  
Picture Menu 
 
 
 
 
 
Step: 
   007 
1. Use the ▲ /▼ buttons to 
select an item. 
 
2. Use the ◄ / ► cursor 
buttons to select an item or 
adjust the value. 
   
   
Item Selection Description 
BRIGHTNESS 000/100 Adjusts the image brightness level. 
CONTRAST 000/100 Adjusts the image contrast level. 
SHARPNESS 000/015 Adjusts the image sharpness. 
  
  
 
DISPLAY MODE 
 NATURAL  Natural color. 
CINEMA Enhances contrast ratio when displaying DVD contents. 
DAYLIGHT Suitable when ambient light is strong. 
GREEN  BOARD 
WHITE BOARD 
BLACK BOARD 
 Adjusts the color settings to make the projected image on 
a (green, white, black) board more visible. 
 
USER 
User Red 000/100 
User Green 000/100 
User Blue   000/100 
 
*Only USER mode in Display mode USER RED/GREEN/BLUE can be adjusted. 
*The setting data in this Picture Menu is not shown correctly if no signal is fed and projected.