Boxlight Boston Series User Manual

69 
MENU 
 
Presentation Menu 
 
 
 
Reset Lamp Timer  
The lamp timer is the time counted after the last resetting. The usage time of the lamp 
is shown in the PRESENTATION Menu. Pressing the RESET button or the ► button 
displays a dialog.  
To reset the lamp time, select the RESET using the ► button.   
  
 
 
►NOTE 
The replacement warning message is set to appear after about 2000 hours of lamp use in order to 
maintain the initial brightness. When replacement message appears, replace the lamp with a...

70 
MENU  
Security Menu 
 
 
 
 
 
Step: 
 
1. Use the ▲ /▼buttons to 
    select an item. 
 
2. Use the ◄ / ► buttons 
to select an item or adjust 
the value.     
 
Item Selection Description 
    
 PIN LOCK 
PROTECTION 
   
 
OFF 
ON 1 
ON 2 
OFF: Turn off PIN lock protection. 
ON 1: After plugging in AC power, you need to key in PIN 
code at the first time of use. If the AC power stays 
plugged, you do not need to key in PIN code next 
time when you use the projector. 
ON 2: You need to key in PIN...

71 
MENU  
Security Menu 
Step: 
1.Use the ▲ /▼buttons to 
select an item. 
2.Use the ◄ / ► buttons to 
select an item or adjust the 
value. 
 
 
 
 
    
Item Selection Description 
FILTER TIMER  Show the filter use hour. 
RESET FILTER 
TIMER 
 EXECUTE  Reset the filter timer after cleaning / changing filter. 
 
FILTER COUNTER 
500 hours 
800 hours 
1000 hours 
 Select (500 / 800 / 1000 hours) depending on the 
environment (default : 500 hours). Please see as below. 
 
 
MAC ADDR. 
 If purchasing LAN...

72 
MENU  
Security Menu 
Step: 
1.Use the ▲ /▼buttons to 
select an item. 
2.Use the ◄ / ► buttons to 
select an item or adjust the 
value. 
 
 
 
 
 
  
 
Item Selection Description 
PROJECTOR 
NAME 
Default is 
Projector 
Projector network setting display which shows bits that can 
be recognized by ASCII. 
 
DHCP 
 
OFF / ON 
When setting ON,  projectors IP address  will be assigned by 
DHCP server automatically. When setting OFF,  you  can use 
remote control to do setting manually. 
 
IP  Key in IP...

73 
MENU  
 
 
 
 
Auto Filter Alert 
Auto Filter Alert is in the SECURITY category and shows the air filter use time and 
alerts user to change the filter. Pressing ► cursor button will display a dialog. When the 
operating time reaches the set time, a warning message will appear on the screen to 
remind user of filter cleaning / replacing.   
  
Filter Replace... 
 
Filter has been used for more than 500 hours.   
   
  
►NOTE 
Please reset the Filter time only when you replace the filter.  

74
9
1010
11
1312 14
151617
PIN Key In Operation
When the projector is turned on and the 
PIN LOCK PROTECTION is set to [ON], 
the image will show as on the right side.
1.  Press the MENU button on the projector 
or remote control. Enter PIN code by 
keypad or remote control.
2. How to enter a PIN code? 
You can use control panel or remote 
control.
CONTROL PANEL  REMOTE CONTROL The control panel and remote control buttons to enter a sequence 
of PIN code is like the photo below.
(1) Press ◄ button:...

75 
Network Control Software Application  
 
 
to utilize this function  
 
 
LAN   
   
   
  
Procedure  
It can help user to monitor and manage the projector(s) status in the local area network. 
 Register the projector(s) which needs to be controlled. Auto search can help you to seek the projector(s) source easily. After registering in the work group, you can start to control the projector. 
 Group the projector(s) into different sections. You can monitor the status easily by the sort of group name...

76 
Network Control Software Application  
 
 
Browser Control 
Auto IP address setting (while DHCP setting is ON): 
(1) Enable DHCP from the projector on-screen-display menu, under SECURITY \ LAN SETTING. 
(2) Wait for the PC server to release IP address to the projector. 
(3) Enter Given IP address (For example http://192.168.1.176/) into the address bar of the web browser and 
press “Enter” key or click “Go” button. 
   
   
 
  
Item Setting description:  ITEM SETTING DESCRIPTION 
Home (Status) Show...

77 
Network Control Software Application  
 
 
 
 
   
 
 
ADMINISTRATOR   MODE 
User  name:  admin 
Password: (Default password setting is disabled.) 
  
   
 
Home (Status): Show current projector status and network configuration settings.   
  

78 
Network Control Software Application  
 
  ITEM ITEM SETTING DESCRIPTION 
Status Projector Name Show projector name. 
 System Status Show if projector is Power On or Inactive . 
 Input Source Show current input source. 
 Lamp Hours Show lamp used hours on current projector. 
 Filter Hours Show filter used hours on current projector. 
Wired LAN IP Address Show current IP address of wired LAN. 
 Subnet Mask Show current Subnet Mask of wired LAN. 
 Gateway Show current Gateway of wired LAN. 
 MAC...