Boxlight Bl X25nu/x25nu User Manual

39
Network Control Software Application
There are two ways to connect to the network control:
Auto IP address setting (DHCP setting is "ON"): 
(1) Enable DHCP from the projector on-screen-display menu, under "SECURITY  LAN SETTING".
(2) Please wait for the PC server to release IP address to the projector.
(3)            Enter "Given IP address (For example http://192.168.1.176/)" into the address bar of \
the web 
      browser and press “Enter” key or click “Go” button. 

40
Network Control Software Application
Item Setting description:
ITEM SETTING DESCRIPTION
StatusShow	current	projector	status	and	network	configuration	settings.
Control Select projector’s detailed setting from this page.
Network Set	up	network	configuration	and	password	from	this	page.
Alert Show	and	setup	Alert	configurations.
Schedule Show	and	set	up	Schedule,	including	 Weekly	Schedule	and	Specific	Day.
If the Administrative & User password is enabled, select your User Name and ent\
er password to...

41
Network Control Software Application
Status :Show	current	projector	status	and	network	configuration	settings.
ITEM SETTING DESCRIPTION
IP Address Show current IP address.
System Status Show if projector is Power On or Inactive *.
Projector Name Show projector name.
Group Name Show group name.
Lamp Hours Show lamp used hours on current projector.
Filter HoursShow	filter	used	hours	on	current	projector.
Input Source Show current input source.
Date(y/m/d) Show date set on current projector.
Time Show...

42
Network Control Software Application
Control:Select projector’s detailed setting from this page. 
ITEM SETTING DESCRIPTION
Basic
Projector Name Show projector name on the current projector.
System Status  how if projector is Power On or Inactive .
Power Switch Power On or Power Off the projector via network.
Input Source Select input source.
Date Setting Update date setting on the projector. Click "Submit" button to update the settings.
Time Setting Update time setting on the projector. Click...

43
Network Control Software Application
Network :Set	up	network	configuration	and	password	from	this	page.
ITEM SETTING DESCRIPTION
Network
DHCPAssign an IP address to the projector from the DHCP server automatically.
IP Address Set up IP Address when DHCP is disabled.
Subnet Mask Set up Subnet Mask when DHCP is disabled.
Gateway Set up Gateway when DHCP is disabled.
DNS Server Set up DNS Server address when DHCP is disabled.
Group Name Create projector group. (Max length: 14 characters)
Projector Name...

44
Network Control Software Application
Alert:Show	and	setup	Alert	configurations.
When problem occurs to the projector, it will automatically send e-mail to remind user.
How to opearte:
1. Enter Email Setting columns.
2. Enter SMTP Setting columns.
3.	Select	 Alert	Condition.	Multiple	choices	are	fine.
4.	Press	Submit	to	confirm.
5.		 After	 completing	 Alert	Setting	 for	the	 first	 time,	 it	is	 recommended	 that	you	press	 Issue	Test	Mail	 to	
see if the attendees can receive the e-mail.  If the...

45
Network Control Software Application
Schedule :Show	and	set	up	Schedule,	including	Weekly	Schedule	and	Specific	Day.
Weekly Schedule
To power on and power off projector based on Weekly Schedule.
How to set up:
1. Choose week days.
2. Set up power-on or power-off time.
    (  Please be sure that the interval between power-on and off setting is more than 5 minutes.)
3. Enter Input Source and select input source.
4.	 After	completing	setting,	press	 ADD	to	confirm.
5. To cancel items, select the item and...

46
Before Use
Activate Network Control Software
	Execute the Network Control Software.
 
		Monitor window below appears.
 

47
Before Use 
Projector Auto Search.
		Click the  (Projector search), located projector will show on the network 
correctly. 
(Graph2)
		 Click  (search again), the projector which is well connected with a PC will be 
shown. 
(Graph3)
NOTE
When the security warning window appears while Network Control is execut\
ing, 
please select "Unblock" to decontrol area network linking against from S\
ystem 
Administer.


NOTE
If there is no projector found on the display window, the following maybe the...

48
Before Use
		Projector Auto Search can rank group names or display names by clicking the 
monitor window title (Group Name) or (Projector Name). This will help you easily 
to understand projectors status.

 Monitor window
		Click  (register projector), the projector information will show on the monitor 
window. Click 
 button (exit), it will cancel the registered item then return to 
register table.
Projector Auto Search.