Black and Decker Performance Food Processor FP6000 User Manual

TM
 
DICING FOOD PROCESSOR
PROCESADOR DE ALIMENTOS  
PARA CORTAR EN CUBITOS
ROBOT CULINAIRE À   
D\fCOUPAGE EN D\fS
 
FP6000 

2
S\bould you \bave any questions or concerns wit\b your new product, 
please call our Customer Service Line at 1-800-231-9786 (US and 
Canada).  Please do not return to t\be store.
Si usted tiene alguna inquietud o pregunta con su producto, por 
favor llame a nuestra línea de servicio al cliente una atención 
inmediata 1-800-231-9786 (EE.UU/Canadá)  01-800-714-2503 
(México). No devuela a la tienda.
Si vous avez des questions ou des préoccupations à propos de 
votre nouveau produit, veuillez communiquer...

3
CONTENTS
IMPORTANT SAFEGUARDS..................\À..................\À....... 4
GETTING TO KNOW YOUR PERFORMANCE FOOD PROCESSOR .............5
GETTING STARTED ..................\À..................\À............. 6
USING YOUR FOOD PROCESSOR ..................\À..................\À.. 6
USING THE FEED CHUTE AND PUSHERS ..................\À..............7
USING THE SPEED CONTROLS ..................\À..................\À.... 8
ADJUSTABLE SPEED DIAL ..................\À..................\À....... 8
USING THE...

4
• Read all instructions.
•  Unit \bas a motor protection system. If t\be largest food 
pus\ber in t\be feed c\bute comes out of t\be food processor 
lid, t\be mac\bine will s\but off. 
•  To protect against risk of electrical s\bock, do not 
 put food processor base, cord or plug in water or ot\ber 
liquid. 
•  Close supervision is necessary w\ben any appliance is used 
by or near c\bildren. 
•  Unplug from outlet w\ben not in use, before putting on or 
taking off parts, and before cleaning.
•  Avoid...

5
GETTING TO KNOW YOUR 
PERFOR\fANCE   
FOOD PROCESSOR
1. Motor base
2.  Suction Cup Feet
3.  Power Cord (not s\bown)
4.  Adjustable Speed Dial
5.  START|OFF toggle 
6.  Large 11-cup workbowl 
  (Part # FP6010-01)
7.   Center Post
8.  Small 4-cup workbowl 
  (Part # FP6010-02)
9.  Lid wit\b Wide Mout\b Feed C\bute 
  (Part # FP6010-03)
10.  Multifunctional 3 piece food pus\ber 
  (small: part # FP6010-04;  
 medium part # FP6010-05;   large: part # FP6010-06) 
11.  Externally adjustable slicing control...

6
GETTING STARTED
• Remove all packing material, any stickers, and t\be plastic band around 
t\be power plug. 
•  Remove and save literature.
•  Please visit www.prodprotect.com/applica to register your warranty.
•  Was\b all removable parts as instructed in CARE AND CLEA\ÀNING  
section of t\bis manu\Àal. 
•  CAUTION: Handle blades\À and disks very carefully. T\bey are very s\barp. 
•  Select a level dry countertop w\bere t\be appliance is to be used allowing 
air space on all sides to provide proper...

7
4. Attac\b your selected blade or disk to t\be center post 
in t\be bottom of t\be large workbowl (instructions for 
individual disks/b\Àlades follow in t\bis manual). 
5.  Place t\be workbowl lid on top of t\be workbowl, 
aligning t\be tabs an\Àd locking it into place by turning 
counterclockwise. T\be workbowl lid is locked w\ben 
it clicks firmly in\Àto place. T\be lid will always and 
only lock w\ben t\be feed c\bute is aligned wit\b t\be 
workbowl \bandle. (B)
Note:  Be sure to lock t\be workbowl...

8
USING THE SPEED CONTROLS
Note: If t\be food processor does not run, m\Àake sure t\be 
workbowl and lid are properly locked on t\be base and t\be\À 
large food pus\ber is fully \Àin place. T\bere is an automatic 
safety lock t\bat causes t\be food processor to stop working 
if t\be large food pus\ber pops out \Àand/or t\be lid and 
workbowl are not properly locked in place. 
ADJUSTABLE  SPEED DIAL 
T\be controls are located on t\be front of t\be base. T\bis food 
processor uses an adjustable speed dial...

9
USING THE DICING D\ÀISK (ORANGE)
\bmportant: T\be dicing disk can o\Ànly be used wit\b t\be l\Àarge 
workbowl. Only run t\be processor on LOW speed w\ben using 
t\be dicing disk. DO \ÀNOT use dicing disk w\Àit\b small workbowl.1.  Lock workbowl onto base.
2.  Place t\be dicing s\baft in\Àto t\be bottom of t\be dicing 
disk and turn cloc\Àkwise to lock it into place. (H)
3.  Carefully pick up t\be d\Àicing assembly using t\be 
finger \boles in t\be top of t\be disk and p\Àlace in t\be 
workbowl over...

10
of t\be disk. Pus\b cleanout tool down into t\be dicing 
grid. T\bis will pus\b remaining food out of t\be grid,\À 
enabling you to was\b t\be dicing disk \Àmore efficiently. 
Note: Hard foods like carrots may require more force to 
remove wit\b t\be dicing clea\Ànout tool. It is normal \Àfor some 
foods to remain in t\be grid un\Àtil grid is was\bed. 
\bmportant: You must remove dicing blade from t\be dicing 
disk before using t\be dicing c\Àleanout tool. Do not use t\be 
cleanout tool if t\be dicing...