Bisell PROheat 2x Healthy Home 20N4 User Manual

16w w w . b i s s e l l . c o m 	11
Operation
Carpet c\beaning (continued)
2. Remove form\fl\b t\bnk  from back of machine.  
2\b.  fill the form\fl\b t\bnk  b\f first unscrewing the 
cap and insert. Alwa\fs use genuine BISSELL 
formulas to maximize cleaning and for the 
safet\f of \four machine. Fill water up to " WATER" 
line and then fill up to " Fo Rm ULA " line with 
BISSELL 2X concentrated formula. Replace the 
cap and insert. Place formula tank back into the 
slot in the back of...

Operation 
Carpet c\beaning (continued)
6. after cle\bning, yo\f m\by w\bnt to t\frn the  c\fstom 
c le\bn di\bl to rinse to give yo\fr c\brpeting \b   
fin\bl w\bter only rinse.  this will ens\fre thoro\fgh 
remov\bl of embedded dirt loosened by the   
deep cle\bning form\fl\b.  bISSE ll deep cle\bning 
form\fl\bs cont\bin \bn \bnti-resoiling \bgent th\bt 
helps yo\fr c\brpets repel dirt \bnd keeps them 
looking good longer.
7.  Remove the tank from the base of the machine 
b\f lifting up on the tank...

Operation 
Carpet c\beaning (continued)
9. cle\bnShot.  CleanShot is an optional feature that 
can be used to fight tough stains. It can be used as 
either a tough stain precleaner (see page 10) or can 
be used during the deep cleaning process itself. 
To use CleanShot either as a precleaner or during 
deep cleaning, follow the instructions below.
a. Set Custom Clean for the desired setting.
b.  Press the CleanShot button and aim the 
focused stream onto the stain. Allow the 
formula to soak in for 30...

14
 
WaRNING: to red\fce the risk of fire \bnd 
electric shock d\fe to intern\bl 
component d\bm\bge, \fse only 
b ISSE ll cle\bning form\fl\bs 
intended for \fse with the deep 
cle\bner.  Non-bISSE ll cle\bning 
form\fl\bs m\by h\brm the m\bchine 
\bnd void the w\brr\bnty.
Operation 
C\beaning \fith attachments (continued)
2.  Follow the instructions on pages 10 & 11 for filling the 
2-in-1 water tank and the formula tank.
3.  Set Read\fTools dial to the hose attachments setting. 
This will allow spra\f...

Operation 
Stain remova\b
Do Not Del\by! attending to \bn \bccident soon \bfter 
it occ\frs ens\fres the most optim\bl cle\bn.  le\bving 
it for \bn extended period of time m\by c\b\fse it to 
set \bnd become perm\bnent.
1.  Blot up liquids with an absorbent cloth or paper 
towels. White materials are recommended because 
certain d\fes ma\f bleed and make the stain worse.
2.  Gentl\f scrape up an\f semi-solids with a spoon or 
spatula. Do not use a knife or other utensil with sharp 
edges because it...

16w w w . b i s s e l l . c o m 	
Operation 
Stain remova\b (continued)
7. Clean using either the  flooR clEaNING,  or 
toolS setting on the  Re\bdytools di\bl.
Hard f\boor c\beaning
yo\fr  pro he\bt 2X model m\by h\bve come with \b 
h\brd floor cle\bning \btt\bchment \bnd  h\brd  floor 
Sol\ftions  form\fl\b. If not, these prod\fcts \bre 
\bv\bil\bble for p\frch\bse by cont\bcting the  bISSE ll 
c ons\fmer Services dep\brtment by phone.  the 
h\brd floor cle\bning \btt\bchment provides effective...

Hard f\boor c\beaning (continued)
11. Allow adequate time for floors to dr\f.
12.  Remove hard floor cleaning attachment, 
rinse and dr\f before storing.
13.  If an\f formula remains in the formula tank, 
pour it back into the BISSELL 2X   
concentrated Hard Floor Solutions bottle for 
use the next time.
14
.  Rinse out the formula tank.
Machine storage
once yo\fr cle\bning is complete, m\bke s\fre 
the 2-in-1 w\bter t\bnk is emptied, rinsed o\ft, 
\bnd dried before the next \fse.  the form\fl\b 
t\bnk...

18w w w . b i s s e l l . c o m 	
Maintenance and car\Ve 
Machine care (continued)
5. The inside of the end caps b\f the brush rolls 
can be wiped out with a clean paper towel, 
or, if a more thorough cleaning is desired, the 
end caps can be taken off using a Phillips 
head       screwdriver and rinsed clean. 
Replace after cleaning.
6.  An\f loose hair or debris can be pulled from the 
brush rolls and thrown awa\f. For the most   
thorough clean before storage, follow directions 
on pages 18 & 19 for...

Maintenance and car\Ve 
Brush remova\b and \barge be\bt rep\bacement
br\fshes c\bn be removed for cle\bning or   
repl\bcement \bs needed. 
1.  Follow small belt removal Instructions on 
page 18.
2.  Remove brush rolls b\f pulling them off of 
the metal rods.
3.  Place cleaned or new brush rolls back onto the 
 rods.  make sure one washer is on each end of   
the rollers prior to sliding onto the rod. Be sure   
to let the rod slide through the bushing to   
insure proper fit.
4.  Re-attach the long belt...

20w w w . b i s s e l l . c o m 	
Troub\beshooting 
Red\fce Spr\by or No Spr\by (contin\fed)
possible  c\b\fse   Remedies
4.  Pump ma\f have lost prime.  4. Turn power  off ( O ) and then back 
     oN  (  I ). Wait one minute, then 
     depress spra\f trigger.  
Dirt lifter  power br\fshes do not t\frn
possible  c\b\fse   Remedies
1.  The brush belt is off or broken.   1. Turn power  off ( O  ) and unplug unit
     from outlet. Follow instructions on   
     page 18 & 19. 
2.   The unit is in the...