Home > Bissell > Cleaner > Bisell PowerWash Powerbrush Select 1623E User Manual

Bisell PowerWash Powerbrush Select 1623E User Manual

Here you can view all the pages of manual Bisell PowerWash Powerbrush Select 1623E User Manual. The Bissell manuals for Cleaner are available online for free. You can easily download all the documents as PDF.

Page 11

11www.bissell.com 
Hard Floor Cleaning continued
6.  Plug into an outlet and turn the power ON.
7.  Plan your cleaning route to leave an exit path. Be sure to allow adequate time for 
floors to dry. 
8.  While pressing the spray trigger, make one  slow forward wet pass and another back.
Caution:  Do Not Overwet.
9.  Repeat the motion without pressing the  spray trigger, using the hard floor tool to 
squeegee and suction up the dirty water. 
10.  When finished, remove hard floor tool,  rinse and let dry...

Page 12

12www.bissell.com 
Machine care
For best results, a few simple steps can assure 
your machine is well maintained after your 
cleaning is complete.
1.  Turn power switch OFF. Unplug the machine and wrap the power cord. 
2.  After emptying the 2-in-1 water tank, rinse  it with running hand hot tap water, taking 
care to clean underneath and around the 
heavy duty bladder. Clean out red lint screen. 
Removable nozzle may be rinsed if necessary.
3.  Replace the 2-in-1 water tank on the machine.
4.  Any loose...

Page 13

13www.bissell.com 
WARNING: To reduce the risk of fire, electric 
shock or injury, unplug from the 
outlet before servicing.Troubleshooting
Reduced Spray OR No Spray
Possible cause Remedies
1.  Bladder may be empty  1.  Turn power switch OFF; Refill bladder 
     with  clean  hand hot tap water.
2.  2-in-1 water tank may not be seated properly.  2.  Turn power switch OFF; remove and 
     reseat  tank. 
3.   Pump may have lost prime.  3.  Turn power switch OFF; after 1 minute 
     turn ON and depress...

Page 14

14www.bissell.com 
BISSELL Consumer Services
If your BISSELL product should require service:
  In the UK, Australia or New Zealand, call BISSELL Consumer Services at the numbers below and we will give you 
the location of a BISSELL Authorized Service Center in your area. For all other countries, contact your local in 
country distributor for questions, service, or repair. 
If you have questions about your warranty or need replacement parts plea\
se contact the numbers below.
Or visit the BISSELL website...

Page 15

15www.bissell.com 
Below is a list of common replacement parts. While not all of these parts may have come 
with your specific machine, all are available to you for purchase, if desired. 
Item  Part No.  Part Name
 1  203-0104  Tank Assembly Complete
 2  203-0102  Tank Base
 3  203-0124  Removable Nozzle
 4  215-0628  Replacement Pump Belt (with instructions)
 5  015-0621  Replacement Brush Belt (with instructions)
 6  203-0105  Lint Screen
 7  203-0149  Hard Floor Tool
 8  203-6651  3 Tough Stain Tool...

Page 16

16www.bissell.com 
Warranty - BISSELL PowerWash Powerbrush Select
©2008 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 120-4039 
Rev 5 /08
Visit our website at: www.bissell.com
Scotchgard is a trademark of 3M
 This warranty gives you specific legal rights, and you may also have other rights which may vary from country  to country. If you need additional instruction regarding this warranty or have ques\
tions regarding what it may 
cover, please contact...
Start reading Bisell PowerWash Powerbrush Select 1623E User Manual

Related Manuals for Bisell PowerWash Powerbrush Select 1623E User Manual

All Bissell manuals