Bisell PowerWash Powerbrush Select 1623E User Manual

							11www.bissell.com 
Hard Floor Cleaning continued
6.  Plug into an outlet and turn the power ON.
7.  Plan your cleaning route to leave an exit path. Be sure to allow adequate time for 
floors to dry. 
8.  While pressing the spray trigger, make one  slow forward wet pass and another back.
Caution:  Do Not Overwet.
9.  Repeat the motion without pressing the  spray trigger, using the hard floor tool to 
squeegee and suction up the dirty water. 
10.  When finished, remove hard floor tool,  rinse and let dry before storing. Refer to 
the Maintenance section on page 12 for 
machine clean up and storage instructions.
Operation
ug120-4039_1623E_508.indd   11 ug120-4039_1623E_508.indd   11 5/19/08   12:30:04 PM
5/19/08   12:30:04 PM 
						

							12www.bissell.com 
Machine care
For best results, a few simple steps can assure 
your machine is well maintained after your 
cleaning is complete.
1.  Turn power switch OFF. Unplug the machine and wrap the power cord. 
2.  After emptying the 2-in-1 water tank, rinse  it with running hand hot tap water, taking 
care to clean underneath and around the 
heavy duty bladder. Clean out red lint screen. 
Removable nozzle may be rinsed if necessary.
3.  Replace the 2-in-1 water tank on the machine.
4.  Any loose hair or debris can be pulled from  the brush roll and thrown away.  
5.  To clean attachments, remove from hose and  rinse in clean, running water. Dry before storing. 
Clean the hose by suctioning clean water from 
the tap. Before wrapping back on machine, lift 
end of hose and stretch out to ensure all water 
is cleared from hose. Refer to page 9, 
illustrations 11 and 12.  
6.  Wipe the machine’s exterior with a soft cloth.
7.  After carpet is dry, vacuum again to remove  hair and fuzz.
Machine storage
Put the unit away in a closet or basement for 
the next use. Store cleaner in a protected, dry 
area. Since this product uses water, it must not 
be stored where there is a danger of freezing. 
Freezing will damage internal components and 
void the warranty.
Maintenance and care
ug120-4039_1623E_508.indd   12 ug120-4039_1623E_508.indd   12 5/19/08   12:30:04 PM
5/19/08   12:30:04 PM 
						

							13www.bissell.com 
WARNING: To reduce the risk of fire, electric 
shock or injury, unplug from the 
outlet before servicing.Troubleshooting
Reduced Spray OR No Spray
Possible cause Remedies
1.  Bladder may be empty  1.  Turn power switch OFF; Refill bladder 
     with  clean  hand hot tap water.
2.  2-in-1 water tank may not be seated properly.  2.  Turn power switch OFF; remove and 
     reseat  tank. 
3.   Pump may have lost prime.  3.  Turn power switch OFF; after 1 minute 
     turn ON and depress spray trigger.
4.  The pump belt may be broken.  4.  Turn power switch OFF and unplug from 
     the outlet. To check if a pump belt has broken, 
     you will need a flat head screwdriver. 
    A. Insert the blade end into the slot of the 
     belt access door to release. Examine the
     belt for breakage. You should be able to see 
     the  pump belt looped around the motor shaft. 
     If it is broken or missing, please refer to 
     Replacement Parts on page 15 before calling 
     BISSELL Consumers Services. Complete  
     installation  instructions will accompany the 
     replacement  belt. 
    B. When replacing belt access door be sure to 
     line  up slots of belt access door with slots in 
     machine, slide door into place and snap shut.
DirtLifter PowerBrush Does Not Turn
Possible cause Remedies1.  The brush belt or pump belt is off or broken.  1.  Refer to Remedy 4 above to check if brush
     belt or pump belt is broken.
Cleaner Not Picking Up Solution
Possible cause  Remedies1.  Removable nozzle may not be properly attached.  1.  Make sure nozzle is on correctly by slightly 
     raising front of machine to line up slots on the 
     base of the machine with the hooks on nozzle. 
     Attach at base first and then click nozzle into place.
2.  2-in-1 water tank lid is not properly installed.  2.  Re-install lid; refer to the image on page 7. 
3.  2-in-1 water tank is not properly seated.  3.  Tank must be firmly seated to function;
      remove and reseat tank. 
4.  2-in-1 water tank has picked up maximum dirty water.  4.  Empty tank and refill, refer to the 
     Operation  section.
5.  The lint screen may be clogged  5.  Clean out lint screen. Refer to page 8.
Slots
A.
B.
Pump Belt
Other maintenance or service not included in the manual should be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please  do  not  return  this  product  to  the  store             
ug120-4039_1623E_508.indd   13 ug120-4039_1623E_508.indd   13 5/19/08   12:30:04 PM
5/19/08   12:30:04 PM 
						

							14www.bissell.com 
BISSELL Consumer Services
If your BISSELL product should require service:
  In the UK, Australia or New Zealand, call BISSELL Consumer Services at the numbers below and we will give you 
the location of a BISSELL Authorized Service Center in your area. For all other countries, contact your local in 
country distributor for questions, service, or repair. 
If you have questions about your warranty or need replacement parts plea\
se contact the numbers below.
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
Note: Please keep your original sales receipt. It provides proof of date of purchase in the event of a  warranty claim. See Warranty on page 16 for details.
Please do not return this product to the store.
For UK inquiries:
Monday - Thursday  9 am — 5 pm 
  Friday  9 am — 4 pm 
BISSELL Homecare (Overseas) Inc. The Boat Yard 
105 Straight Road 
Old Windsor 
Berkshire, SL4 2SE
United Kingdom 
Telephone: 0870-225-0109  For Australian inquiries:
Monday - Friday 9 am — 5 pm
BISSELL AUSTRALIA PTY LIMITED Unit 35
15 Ricketts Road
Mount Waverley, Victoria 3149
Australia
Telephone: 1-800-811-183 
For all other inquiries: Monday - Friday    8 am — 4 pm 
BISSELL Homecare, Inc.
PO Box 1888
Grand Rapids, MI 49501 USA
Telephone: 01-616-453-4451 
Fax: 01-616-453-1383
For New Zealand inquiries:
Monday - Friday    9 am — 5 pm 
Parex Industries Ltd. 103 Central Park Drive
Henderson
Auckland
New Zealand
Telephone: 0800-247-735 
ug120-4039_1623E_508.indd   14 ug120-4039_1623E_508.indd   14 5/19/08   12:30:08 PM
5/19/08   12:30:08 PM 
						

							15www.bissell.com 
Below is a list of common replacement parts. While not all of these parts may have come 
with your specific machine, all are available to you for purchase, if desired. 
Item  Part No.  Part Name
 1  203-0104  Tank Assembly Complete
 2  203-0102  Tank Base
 3  203-0124  Removable Nozzle
 4  215-0628  Replacement Pump Belt (with instructions)
 5  015-0621  Replacement Brush Belt (with instructions)
 6  203-0105  Lint Screen
 7  203-0149  Hard Floor Tool
 8  203-6651  3 Tough Stain Tool
 9  203-6653  4 Upholstery Tool
10 203-6654  6 Stair Tool
11  203-6652  Powered TurboBrush Hand Tool
12  203-0116  Spraying, Sliding Crevice tool w/ Brush
13 203-6655  Spraying Crevice Tool
14  210-3040  Mesh Tool Storage Bag
Replacement parts
Cleaning Formula: Refer to bottom of page 4 of this guide for a full selection of cleaning 
formula available for purchase.
1
6
11
2
7
123
8
13 4
9
145
10
ug120-4039_1623E_508.indd   15 ug120-4039_1623E_508.indd   15
5/19/08   12:30:08 PM
5/19/08   12:30:08 PM 
						

							16www.bissell.com 
Warranty - BISSELL PowerWash Powerbrush Select
©2008 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 120-4039 
Rev 5 /08
Visit our website at: www.bissell.com
Scotchgard is a trademark of 3M
 This warranty gives you specific legal rights, and you may also have other rights which may vary from country  to country. If you need additional instruction regarding this warranty or have ques\
tions regarding what it may 
cover, please contact BISSELL Consumer Services by telephone, or regular post as described below, or 
contact your local in country distributor.
 Limited One Year Warranty
 Subject to the *EXCEPTIONS AND EXCLUSIONS identified below,  BISSELL Homecare, Inc., will replace (with 
new or remanufactured components), at BISSELL’s option, free of charge from the date of purchase by the 
original purchaser, for one year any defective or malfunctioning part do to manufacturers d\
efect. 
 This warranty applies to product used for personal, and not commercial or rental service. This warranty does  not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction 
caused by negligence, abuse, or use not in accordance with the User’s Guide is not covered.
BISSELL HOMECARE INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL 
DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. 
BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT. 
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES 
EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE 
BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED 
TO THE ONE YEAR DURATION FROM THE DATE OF PURCHASE AS 
DESCRIBED ABOVE.
For UK inquiries:
Monday - Thursday  9 am — 5 pm 
  Friday  9 am — 4 pm 
BISSELL Homecare (Overseas) Inc. The Boat Yard 
105 Straight Road 
Old Windsor 
Berkshire, SL4 2SE
United Kingdom 
Telephone: 0870-225-0109  For Australian inquiries:
Monday - Friday 9 am — 5 pm
BISSELL AUSTRALIA PTY LIMITED Unit 35
15 Ricketts Road
Mount Waverley, Victoria 3149
Australia
Telephone: 1-800-811-183 
For all other inquiries: Monday - Friday    8 am — 4 pm 
BISSELL Homecare, Inc.
PO Box 1888
Grand Rapids, MI 49501 USA
Telephone: 01-616-453-4451 
Fax: 01-616-453-1383
For New Zealand inquiries:
Monday - Friday    9 am — 5 pm 
Parex Industries Ltd. 103 Central Park Drive
Henderson
Auckland
New Zealand
Telephone: 0800-247-735 
ug120-4039_1623E_508.indd   16 ug120-4039_1623E_508.indd   16 5/19/08   12:30:14 PM
5/19/08   12:30:14 PM