Bisell PowerWash Powerbrush Select 1623E User Manual

							USER’S GUIDE
1623 SERIES 220-240V
3Safety Instructions
Product View
Special Features Assembly
Operation
Maintenance and Care
Troubleshooting
Consumer Services
Warranty Replacement Parts
4
6 5
7-11
12
13
14
16 15
PowerWash
™ 
Powerbrush Select
ug120-4039_1623E_508.indd   1 ug120-4039_1623E_508.indd   1 5/19/08   12:28:42 PM
5/19/08   12:28:42 PM 
						

							2
Thank you for buying a BISSELL deep cleaner 
 2www.bissell.com
We’re glad you purchased a BISSELL deep cleaner. Everything we know about 
floor care went into the design and construction of this complete, high-tech 
home cleaning system.  By purchasing this product you are helping BISSELL with 
our commitment to reducing our impact on the environment through an 
expanding range of sustainable design efforts.
Your deep cleaner is w ell made, and we back it with a limited one-year warranty. 
We also stand behind it with a knowledgeable, dedicated Consumer Services 
department, so, should you ever have a problem, you’ll receive fast, considerate 
assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a 
global leader in the design, manufacture, and service of high quality homecare 
products like your deep cleaner.
Thanks again, from all of us at BISSELL. 
Mark J. Bissell
President and Chief Executive Officer
ug120-4039_1623E_508.indd   2 ug120-4039_1623E_508.indd   2 5/19/08   12:28:47 PM
5/19/08   12:28:47 PM 
						

							 3www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic 
precautions should be observed, including 
the following: 
READ ALL INSTRUCTIONS 
BEFORE USING YOUR 
UPRIGHT DEEP CLEANER. 
Always connect to a properly Earthed 
outlet. Unplug from outlet when not in 
use and before conducting 
maintenance or troubleshooting. 
     WARNING: To reduce the 
risk of fire, electric shock, or injury:
■    Use indoors only
■    Do not immerse
■    Use only on surfaces moistened by 
cleaning process
■    Do not leave machine when it is plugged in
■    Do not service machine when it is plugged in
■   If the supply cord is damaged, it must be replaced 
by the manufacturer or its service agent in order 
to avoid a hazard
■    Do not use machine if it has been dropped, 
damaged, left outdoors or dropped into water
■    Do not expose to rain, store indoors 
■    Do not pull or carry by cord, use cord as a 
handle,  close door on cord, pull cord around sharp 
corners or edges, run appliance over cord, or 
expose cord to heated surfaces
■    Do not carry the appliance while in use
■    Do not unplug by pulling on cord; unplug by 
grasping plug not the cord
■    Do not handle plug or appliance with wet hands
■    Do not put any object into appliance openings, use 
with blocked opening or restrict air flow
■    Do not expose hair, loose clothing, fingers or body 
parts to openings or moving parts
■    Do not pick up hot or burning objects
■    Do not pick up flammable or combustible 
materials (lighter fluid, petrol, kerosene, etc.) or use 
in the presence of explosive liquids or vapours
■    Do not use appliance in an enclosed space filled with 
vapours given off by oil base paint, paint 
thinner, some moth proofing substances, 
flammable dust, or other explosive or toxic vapours ■
   Remove plug from electrical outlet before cleaning 
or maintaining the appliance
■    Not intended for use by young children or infirm 
persons without supervision
■    Young children should be supervised to ensure 
that they do not play with the appliance
■    Do not pick up toxic material (chlorine bleach, 
ammonia, drain cleaner, petrol, etc.)
■    Do not modify the Earthed plug
■    Do not allow to be used as a toy
■    Do not use for any purpose other than described 
in this User’s Guide
■    Use only manufacturer’s recommended 
 attachments
■    Use only cleaning products formulated by 
BISSELL for use in this appliance to prevent 
internal component damage
■    Keep openings free of dust, lint, hair, etc.
■    Keep appliance on a level surface
■    Turn off all controls before unplugging
■    Be extra careful when cleaning stairs
■    Pay close attention when working 
around children
SAVE THESE 
INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD USE ONLY. 
   WARNING: This appliance must 
be Earthed.
IMPORTANT FOR OPERATION ON 
A 220-240 VOLT A.C. 50/60 Hz POWER 
SUPPLY ONLY. 
If your appliance is fitted with a nonrewireable 
BS 1363 plug it must not be used unless a 13 
amp (ASTA approved to BS 1362) fuse is fitted in 
the carrier contained in the plug. Spares may be 
obtained from your BISSELL supplier. If for any 
reason the plug is cut off, it must be disposed 
of, as it is an electric shock hazard should it be 
inserted into a 13 amp socket.
ug120-4039_1623E_508.indd   3 ug120-4039_1623E_508.indd   3 5/19/08   12:28:47 PM
5/19/08   12:28:47 PM 
						

							 4www.bissell.com 
Product view
48 oz. BISSELL 
Fiber Cleansing Formula™ with 
Scotchgard™ 
Protector
item # 710E
48 oz. BISSELL 
Multi-  Allergen 
Removal
™ Formula™ with 
Scotchgard™ 
Protector
item # 720E
48 oz. BISSELL 
Pet Odor and 
Soil Removal
™ 
Formula with 
Scotchgard™ 
Protector
item # 730E
48 oz. BISSELL 
Natural Orange 
Extract Formula  
with Scotchgard
™ 
Protector
item # 740E
32 oz. 
BISSELL 
Hard Floor 
Solutions
™
Formula
item # 
0482
48 oz. BISSELL
Lavender Essence 
Formula
 
with 
Scotchgard
™ 
Protector
item # 750E
DirtLifter™ 
PowerBrush
Belt Access Door
Ready Tools
™ Dial
Removable 
Nozzle
Ergonomically 
Designed Handle™
Handle Assembly
Lower Body
Assembly Upper Body
Assembly
Edge 
Sweep
™ 
Brushes Easy Carry 
Handle
Quick Release™ 
Cord Wrap
Power Cord
Spray Trigger
Cleaning fluid 
Keep plenty of genuine BISSELL Fiber Cleansing Formula™ on hand so you can clean and protect 
whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas.  Non-BISSELL 
cleaning solutions may harm the machine and will void the warranty.
WARNING: To reduce the risk of fire and electric 
shock due to internal component damage,
use only BISSELL cleaning  fluids 
intended for use with the deep cleaner. 
Non-BISSELL cleaning solutions may 
harm the machine and void the warranty.
Large, Easy-To-Maneuver 
Wheels Ready To Use Hose
Hose Secure Latch
2-in-1 Crevice Tool
Handle Release Power Switch
2-in-1 Water Tank
™ 
(with built in 
measuring cup)
Cord Clip
Tough Stain Tool
ug120-4039_1623E_508.indd   4 ug120-4039_1623E_508.indd   4 5/19/08   12:28:47 PM
5/19/08   12:28:47 PM 
						

							 5www.bissell.com 
This user’s guide has been designed to help 
you get the maximum satisfaction from your 
BISSELL deep cleaner. You’ll find assembly 
and operating instructions, safety precautions, 
as well as maintenance and troubleshooting 
instructions. Please read this user’s guide 
thoroughly before assembling your deep 
cleaner. 
Your deep cleaner comes in five easy to 
assemble components:
 Upper body assembly
 Upper hose rack
 Lower body assembly
 Lower hose rack
Three Phillips head screws are included and 
can be found taped to the handle assembly.
The only tool you will need to assemble your 
cleaner is a Phillips head screwdriver.
1.  Slide upper body assembly onto lower  body and secure with two screws.
2.  With the “tabs” on upper hose rack  pointing toward top of handle, attach upper 
hose rack to handle assembly by sliding it to 
top of handle until it can go no further. Turn 
hose rack until it snaps into place.
3.  Slide handle assembly down into upper body  until it will go no further and secure with 
screw.
4.  Attach lower hose rack to back of upper  body by pushing into open slots and sliding 
down until it snaps into place.
5.  Wrap flex hose around hose rack and secure  it into notched out holder as shown.  
6.  Keep flex hose locked in place with hose  secure latch.
How to use this guide
Assembly
 WARNING: Do not plug in your cleaner 
until you have completely 
assembled it per the 
following  instructions 
and are familiar with all 
instructions and operating 
procedures.
1.
2. 3. 4.
5. 6.
Tip: Deep cleaning carpeting 
regularly can reduce dust and allergens 
in your home.
Ta b
Upper Hose Rack
Notch Hose  
Secure 
Latch
ug120-4039_1623E_508.indd   5 ug120-4039_1623E_508.indd   5
5/19/08   12:29:17 PM
5/19/08   12:29:17 PM 
						

							Your BISSELL deep cleaner is a home cleaning 
system that uses a combination of hand hot tap 
water, BISSELL advanced cleaning formula, brush 
agitation and suction to safely clean carpets.
DirtLifter™ PowerBrush
The DirtLifter PowerBrush is designed to 
enhance cleaning performance. The bristle 
pattern safely lifts out the deep down dirt while 
gently grooming carpet fibers. The floating 
suspension self-adjusts to all carpet heights. 
When the power is ON and the machine is in 
the upright position, your carpet is protected 
because the brushes are lifted up off the carpet.
Ready Tools™ Dial
The Ready Tools feature allows you to choose 
between FLOOR CLEANING or cleaning with 
TOOLS simply by turning the dial. The TOOLS 
setting allows for above floor cleaning of 
upholstery, stairs, creases along baseboards and 
other hard to reach areas. Simply choose the tool 
that is appropriate for the job, attach to flex hose 
and you are ready to go.
Measuring cup
Your deep cleaner is equipped with a measuring 
cup for adding the proper amount of formula 
to the 2-in-1 water tank. For convenience the 
measuring cup is built into the lid of the 2-in-1 
water tank.
2-in-1 water tank
Our 2-in-1 water tank system is designed with a 
heavy duty bladder inside for clean water. As you 
clean, the clean water in the bladder will empty 
and mix with the cleaning formula. Dirty water 
pulled out of your carpet will collect around the 
outside of the bladder so clean and dirty water 
are always kept separate. This allows the user to 
maximize tank space, yet only carry one tank to 
and from the sink for emptying and filling.
Special features of your BISSELL deep cleaner
 6www.bissell.com 
ATTENTION: Some Berber carpets have a tendency to fuzz with wear. 
Repeated strokes in the same area with an ordinary 
vacuum or deep cleaner may aggravate this condition. 
Measuring Cup
Carry Handle
WARNING:
To reduce the risk of fire, use only  
BISSELL advanced deep cleaning  
formula for full size machines in your  
deep cleaner. Use of cleaning  
formulas that contain lemon or  
pine oil may damage this appliance  
and void the warranty. Chemical  
spot cleaners or solvent-based soil  
removers should not be used. These  
products may react with the plastic  
materials used in your deep cleaner    causing cracking or pitting. 
ReadyTools Dial
ug120-4039_1623E_508.indd   6 ug120-4039_1623E_508.indd   6 5/19/08   12:29:32 PM
5/19/08   12:29:32 PM 
						

							Before you clean
1.  Plan activities to give your carpet time to dry.
2. Move furniture to another area if cleaning 
an entire room (optional).
3.  Vacuum area with a dry vacuum cleaner 
before deep cleaning.
4.  Plan your cleaning route to leave an exit path. It  is best to begin cleaning in the corner farthest 
from your exit.  
Fill the 2-in-1 water tank
1.  Remove the tank from the base of the machine by lifting the tank carry handle.
2.  Carry like a bucket to the sink. Rotate the handle  forward to unlatch the lid. Remove lid, turn over 
and locate built in measuring cup.
3.  Fill formula to the indicated fill line on the  built in measuring cup and pour into mouth 
of the bladder.
4.  Fill the bladder with clean hand hot  tap water. 
*Do not boil or microwave water as it can 
destroy the bladder.
5.  Replace the top of the tank by matching the lid and tank edges. Handle must be in 
the forward position in order to replace lid. 
Rotate the handle to the carrying position to 
latch the lid. 
Note: Remember to secure the lid and test 
to make sure it is secure before picking up 
the tank.
6.  Place tank into machine base, seating firmly 
in place. Rotate tank handle back into latched 
position. 
 7www.bissell.com 
2
4313
4
567
9101112EXIT
START HERE
Operation
1.2.
4
3.
6.
5.
ug120-4039_1623E_508.indd   7 ug120-4039_1623E_508.indd   7 5/19/08   12:29:43 PM
5/19/08   12:29:43 PM 
						

							8www.bissell.com 
2.
3.1.
5.
Lint Screen
Empty the 2-in-1 water tank/clean removable nozzle
4.
Operation
Carpet cleaning strokes
1.  Plug the deep cleaner into a proper outlet.   Turn the power ON by pressing the red power 
switch on the back of the unit with your foot.
2.  With your foot, press the gray handle release  lever located on the back of unit below 
water tank.
3.  While pressing the spray trigger, make one  slow forward wet pass and another back. 
Let the BISSELL advanced deep cleaning 
formula and DirtLifter PowerBrush do the 
work for you. Caution: Do not overwet.
4.  Release the spray trigger and make one  slow forward and backward pass over the 
same area to remove any residual dirty 
water and aid in drying.
5.  Repeat cleaning passes until solution being  appears clean. Continue passes without 
pressing the spray trigger until you can’t 
see any more water being suctioned up.
1.  Turn power switch OFF.  Remove the 2-in-1 
water tank from the base using the tank carry 
handle. Carry the tank like a bucket to a utility 
sink or outside where you will dispose of the 
collection water. Remove the top of the tank 
by rotating the handle forward to unlatch lid 
and lifting lid off tank.
2.  Empty collection water from bottom of tank.
3.  After each use, remove and rinse the lint  screen located on the tank lid. 
4.  If nozzle needs to be cleaned, remove by grasping   handle at the top and pulling forward. Clean 
removable nozzle by rinsing under running water.  
5.  When finished, replace nozzle by slightly  raising front of machine to line up slots on 
the base with the hooks on nozzle. Attach at 
base first and then click nozzle into place. 
NOTE: If nozzle is not attached properly, 
loss of suction will occur.
6.  To continue carpet cleaning, refer back to pages 7 through 8, beginning with “Fill the 
2-in-1 water tank” on page 7.
  If cleaning is complete, refer to the  Maintenance and care section.
 WARNING: To reduce the risk of fire and 
electric shock due to internal 
component damage, use only 
BISSELL cleaning fluids intended 
for use with the deep cleaner. 
Non-BISSELL cleaning solutions 
may harm the machine and void 
the warranty.
Power Switch
Handle Release
Tip: Thorough vacuuming 
before deep cleaning will prevent 
early clogging of the lint trap.
ug120-4039_1623E_508.indd   8 ug120-4039_1623E_508.indd   8 5/19/08   12:29:54 PM
5/19/08   12:29:54 PM 
						

							9www.bissell.com 
Ready Tools™ cleaning with attachments
Your deep cleaner comes equipped with a hose 
and at least one attachment for cleaning stairs, 
upholstery, and more.
Important! If using the machine to clean 
upholstery, check upholstery tags.
1.  Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use 
your PowerSteamer. If the tag is coded with 
“X” or “S” (with a diagonal strike through), 
or says “Dry Clean Only,” do not proceed. Do 
not use on velvet or silk. If manufacturer’s 
tag is missing or not coded, check with your 
furniture dealer. 
2.  Check for colorfastness in an inconspicuous  place.
3.  If possible, check upholstery stuffing.  Colored stuffing may bleed through fabric 
when wet.
4.  Plan activities to give upholstery time to dry.
5.  Vacuum thoroughly to pick up loose debris and  pet hair. Use a vacuum with a brush attachment 
and a crevice tool to clean in fabric folds and tufts.
6.  To begin cleaning with attachments, follow  the instructions on pages 7 for filling the 
2-in-1 water tank.
7.  Set the ReadyTools dial to the TOOLS setting.  This will allow spray and suction from the hose. 
8.  Attach the desired cleaning tool to the end of  the hose.
9.  Clean by pressing the spray trigger to spray  solution onto the area to be cleaned. Slowly 
move the tool back and forth over the soiled 
surface. Release the spray trigger to suction 
dirty water. Continue to clean in the area, 
working in small sections, until dirt is removed. 
Caution: Do Not Overwet.
10.  When finished cleaning, remove and rinse  tool(s) in clean, running water.  
11.  It is recommended that you suction clean  water from the tap to rinse out the hose. 
12.  Before wrapping hose onto tool rack, lift end  of hose and stretch out to ensure all water is 
cleared from hose.
Operation
Adsdfdd ghg bvh
cvbbj jkn hnbj jkvh
gcghhjj   jhffhl kllgh
Manufacturer’s tag
7.
11. 12.
Tip: To clean with sliding 
crevice tool, slide brushes forward 
to clean stain, slide back to suction
ug120-4039_1623E_508.indd   9 ug120-4039_1623E_508.indd   9 5/19/08   12:30:00 PM
5/19/08   12:30:00 PM 
						

							10www.bissell.com 
13.  Wrap flex hose around tool rack.
14.  Empty 2-in-1 water tank and rinse out, following instructions on page 8.
15.  If the ReadyTools dial becomes difficult to  turn, the diverter assembly that holds the 
dial may need to be cleaned. To clean, first 
remove nozzle and locate screw that holds 
the diverter assembly in place. With a Phillips 
screwdriver, remove the screw and set aside.
16.  Remove diverter assembly; hold under  running water making sure water flows 
through and around the dial. Turn the dial about 
10 times clockwise and 10 more times counter 
clockwise. This should free up any debris.
17.  Wipe diverter assembly with a soft cloth and  replace back on machine by screwing back 
into place. Replace nozzle.
18.  Return ReadyTools dial to FLOOR CLEANING  setting.
Hard Floor Cleaning
Your deep cleaner may have come with a hard 
floor tool and Hard Floor Solutions Formula.  The 
hard floor tool provides effective cleaning for 
linoleum, vinyl, and tile floors.  
Caution: Do not use on unsealed hardwood floors.
1.  Thoroughly vacuum or sweep floor to pick up any debris.
NOTE: Prior to filling 2-in-1 water tank, be 
sure all carpet cleaning formula is 
thoroughly rinsed from tank.
2.  Fill BISSELL Hard Floor Solutions Formula to the indicated fill line in the built in measuring 
cup and pour into mouth of bladder.
3.  Fill the bladder with clean hand hot tap  water and set aside.
4.  Attach the hard floor tool to the bottom of  the machine by hooking it into the nozzle 
and swinging it down until it clicks into 
place. 
5.  Be sure the ReadyTools dial is set to  FLOOR CLEANING.
Operation
15.
4. 16.
Screw
Run water through here
Ready Tools™ cleaning with attachments continued
ug120-4039_1623E_508.indd   10 ug120-4039_1623E_508.indd   10
5/19/08   12:30:02 PM
5/19/08   12:30:02 PM