Bisell PowerForce Turbo Bagless 82H5E User Manual

							USER’S GUIDE82H5 SERIES 220-240V
3Safety Instructions
4Product View
5-6 Assembly
6-7
Operation  
8-12 Maintenance and Care
13-14 Troubleshooting
14Consumer Services
15 Replacement Parts
16Warranty
PowerForce™ 
Turbo
BAGLESS
ug110-4049_82H5_1008.indd   1
ug110-4049_82H5_1008.indd   1 10/14/08   2:39:30 PM
10/14/08   2:39:30 PM 
						

							2
Thank you for buying a BISSELL PowerForce™ Turbo Bagless Vacuum 
 2www.bissell.com 
We’re glad you purchased a BISSELL PowerForce Turbo Bagless Vacuum. 
Everything we know about floor care went into the design and constructio\
n of 
this powerful, high-tech home vacuuming system. 
Your BISSELL PowerForce Turbo Bagless is well made, and we back it with a 
limited one year warranty. We also stand behind it with a knowledgeable, 
dedicated Consumer Services Department, so, should you ever have a probl\
em, 
you’ll receive fast, considerate assistance.  
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a 
global leader in the design, manufacture, and service of high quality ho\
mecare 
products like your BISSELL PowerForce Turbo Bagless.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
Chairman, President and CEO
ug110-4049_82H5_1008.indd   2 ug110-4049_82H5_1008.indd   210/14/08   2:39:36 PM
10/14/08   2:39:36 PM 
						

							 3www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, 
basic precautions should be observed, 
including the following:
READ ALL INSTRUCTIONS  BEFORE USING YOUR 
UPRIGHT VACUUM. 
WARNING: To reduce 
the risk of fire, electric shock, 
or injury:
 
■ Use indoors only.
■  Do not leave machine when it is plugged in.
■  Do not use with damaged cord or plug.
■  If appliance is not working as it should, has been 
dropped, damaged, left outdoors, or dropped into water, 
return it to a service agent.
■  Do not handle unit with wet hands.
■  Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run 
appliance over cord, or expose cord to heated surfaces.
■  Do not unplug by pulling on cord. Unplug by grasping plug.
■  Do not run appliance over cord.
■  Do not handle plug or appliance with wet hands.
■  Do not expose hair, loose clothing, fingers or body parts to openings or moving parts.
■  Do not pick up hot or burning objects such as cigarettes, matches, or hot ashes.
■  Do not pick up flammable or combustible ma terials (lighter 
fluid, petrol, kerosene, etc.) or use in the  
presence of explosive liquids or vapour.
■  Do not use appliance in an enclosed space filled with  vapours given off by oil base paint, paint 
thinner, some moth proofing substances, flammable dust, 
or other explosive or toxic vapours.
■  Not intended for use by young children or infirm persons without supervision.
■   Young children should be supervised to ensure that they do 
not play with the appliance.
■  Remove plug from electrical outlet before cleaning or  maintaining the appliance.
■  If the supply cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a 
hazard.
■  Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, petrol, etc.).
■  Do not allow to be used as a toy.
■  Do not use for any purpose other than described in this User’s Guide.
■  Use only manufacturer’s recommended attachments.
■  Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
■  Keep appliance on a level surface.
■  Turn off all controls before unplugging.
■  Be extra careful when cleaning stairs.
■  This appliance is provided with double insulation. Use only identical replacement parts.
■  Do not use without debris tank and/or filters in place.
■  Pay close attention when working around children.
SAVE THESE  INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
IMPORTANT FOR OPERATION ON A 220-240 VOLT A.C. 50/60 Hz 
POWER SUPPLY ONLY. 
FOR RESIDENTS OF THE 
UNITED KINGDOM ONLY
If your appliance is fitted with a nonrewireable BS 1363 
plug it must not be used unless a 13 amp (ASTA approved 
to BS 1362) fuse is fitted in the carrier contained in 
the plug. (Spares may be obtained from your BISSELL 
supplier). If for any reason the plug is cut off, it must be 
disposed of, as it is an electric shock hazard should it be 
inserted into a mains socket. 
ug110-4049_82H5_1008.indd   3 ug110-4049_82H5_1008.indd   3 10/14/08   2:39:36 PM
10/14/08   2:39:36 PM 
						

							 4www.bissell.com 
CAUTION: Do not plug in your 
vacuum cleaner until 
you are familiar with 
all instructions and 
operating  procedures.
Handle
TurboBrush
™
PowerfootFurniture Protection Guard
Height 
Adjustment 
Knob
Product view
Carrying
Handle
Power Switch Crevice Tool
Quick Reach
™ 
Handle
Handle
Release 
Pedal Deluxe Stretch 
Hose 
Extension Wand
Combination 
Dusting Brush/ 
Upholstery Tool
Hose Wand
Hose 
Wand Base
Foot Hose Hose Clip
Cord Clip
Twist n Snap
™
Hose Connector
HEPA Media
Post-Motor
Filter
Pre-Motor
Filter
Headlight
Lock ’n Seal
™ 
Lever
Inner and Outer 
Circular Filters Upper Tank
Quick Release
™ 
Cord Wrap
Power Cord
Primary 
Separator
Dirt ContainerFilter Cup
ug110-4049_82H5_1008.indd   4 ug110-4049_82H5_1008.indd   4 10/14/08   2:39:39 PM
10/14/08   2:39:39 PM 
						

							 5www.bissell.com 
How to use this guide
Assembly
This User’s Guide has been designed to help 
you get the most satisfaction from your BISSELL 
PowerForce Turbo Bagless. You’ll find assembly and 
operating instructions, safety precautions, as well 
as maintenance and troubleshooting instructions. 
Please read this Users Guide thoroughly before 
assembling your vacuum cleaner. 
Pay particular attention to the product diagram, 
assembly instructions, and part names. Locate 
and organize all parts before assembly. Following 
this User’s Guide will greatly enhance your ability 
to get the most performance from your BISSELL 
PowerForce Turbo Bagless for many years.
The only tool you’ll need to assemble your 
vacuum cleaner is a screwdriver.
Attach handle to vacuum
1.  Locate the vacuum handle and remove the screw packet taped to the base of the handle.
2.  Stand the vacuum upright and place the handle  on the top of the vacuum body.
3.  Insert the screws into the existing holes on  each side. Tighten securely with a screwdriver.
Attach vacuum hose and tools
1.  Attach the Twist ‘n Snap hose by lining up the tabs on the base with the corresponding 
notches on the back of the vacuum.
2.  Turn the Twist ‘n Snap hose to the right to lock  the hose into place.
3.  Grasping the Quick Reach handle, slide the  end of the hose wand into the hose wand 
base. Snap the hose into the hose clip.
NOTE: The powerfoot will not operate 
effectively unless the hose wand is 
firmly attached.  
4.  Slide the extension wand and the crevice tool together into the storage clip on the side of 
the vacuum.
5.  Snap the combination tool into the storage clip  on the back of the vacuum.
6.  The TurboBrush bracket slides into the front of  the handle. Attach the bracket by 
aligning the pegs with the holes on the 
handle and pulling down until it locks 
into place.
WARNING: 
Plastic film can be 
dangerous. To avoid danger 
of suffocation, keep away 
from babies and children.
ug110-4049_82H5_1008.indd   5 ug110-4049_82H5_1008.indd   5 10/14/08   2:39:49 PM
10/14/08   2:39:49 PM 
						

							16www.bissell.com 
Attach vacuum hose and tools continued
7.  Place the TurboBrush in the bracket by aligning the bottom of the bracket with the opening of the 
brush roll and snap the TurboBrush into place.
Handle position
Press the handle release pedal with your foot to 
place your BISSELL PowerForce Turbo Bagless 
into one of three cleaning positions.
1. Upright- For storage and above floor 
cleaning with special tools.
2.  Normal Cleaning- Press handle release 
pedal once. Use for most household floor 
cleaning tasks.
3.  Low Cleaning- With the vacuum in normal 
cleaning position, press handle release pedal 
again. Use for reaching under low furniture 
such as tables, chairs and beds.
Powerfoot height adjustment
The powerfoot/rotating floor brush on your BISSELL 
PowerForce Turbo Bagless can be adjusted to clean 
several floor surfaces. 
NOTE: For optimal cleaning performance, 
adjust to the lowest practical setting. If 
your cleaner is difficult to push, adjust to 
the next higher setting. 
1.  Place handle in upright position. 
2.  Turn height adjustment knob to desired setting.
Lowest Setting -   For bare floors.
Medium Settings - For short and medium 
 pile carpets.
  Highest Setting -   For plush pile carpets.
3.  Place the handle into the normal cleaning  position and the powerfoot will adjust to the 
setting chosen.
NOTE: You may also adjust the setting while 
in the normal cleaning position. 
Transporting cleaner
1.  To move your cleaner from room to room, put the handle in the upright position, tilt the cleaner 
back on its rear wheels and push forward. 
2.  The cleaner can also be moved by using the  carrying handle on the back.
Assembly
Operation
 6
CAUTION: Before using your vacuum, make 
sure that the dirt container is in 
locked position and that all filters 
(inner circular, outer circular, 
pre-motor and post-motor) are 
in place. Do not operate your 
vacuum without these filters.
Tip:
Your vacuum features 
a Quick Release cord 
wrap. To remove the 
power cord quickly 
and easily, rotate 
the upper cord wrap 
towards the floor, and 
slip power cord from 
upper and lower 
cord wraps.
Tip:
Before cleaning under 
low furniture, check 
area first for objects 
that might harm the 
unit or block the 
vacuum hose.
1
2
3
ATTENTION: Some Berber carpets have a tendency to fuzz 
with wear. Repeated strokes in the same 
area may aggravate this condition. Consider 
setting your cleaner on a higher than normal 
setting for this type of carpet.
Carrying 
Handle
ug110-4049_82H5_1008.indd   6 ug110-4049_82H5_1008.indd   6 10/14/08   2:39:57 PM
10/14/08   2:39:57 PM 
						

							 7www.bissell.com 
Special tools
Your BISSELL PowerForce Turbo Bagless is not 
only a powerful carpet and rug vacuum cleaner, 
it’s also a versatile above floor vacuum cleaner 
when you select one of the special tools.
1.  Raise handle to upright position.
2.  Grasp the Quick Reach handle and lift hose wand to separate from suction intake opening.
3.  Attach tools by firmly pushing onto vacuum  hose or extension wand.
  Combination Dusting Brush/Upholstery Tool: 
Two types of cleaning tools are included in 
one attachment; rotate for desired tool.
■ Use brush side to dust furniture, blinds, books, 
lamps, shelves and baseboards.
■ Use upholstery side for curtains, draperies, cushions and fabrics.
Crevice Tool:
Use in tight, narrow spaces.
Extension Wand:
Use with desired attachment for a longer reach.
TurboBrush:
Use rotating brush action for small areas such 
as stairs and upholstery.
NOTE: Press gently when using the 
TurboBrush to gain maximum cleaning. 
Too much pressure will cause the brush 
to stop rotating. 
Power cord
When you are done using your BISSELL 
PowerForce Turbo Bagless, return it to the 
upright position and store the power cord.
1.  Turn power switch OFF.
2.  Unplug power cord by grasping the plug (NOT  the cord) and disconnect from outlet.
3.  Loop power cord around cord wraps on side  of vacuum cleaner.
4.  Clip molded plug to power cord to secure.
OperationNOTICE: The floor brush will continue to rotate 
while you use your vacuum for above 
floor cleaning. To prevent carpet 
damage, do not lean on the vacuum 
or let the powerfoot tilt forward.
CAUTION: The rotating floor brush 
continues to rotate while tools 
are in use. To reduce the risk 
of injury from moving parts, 
always move the cleaner with 
the carrying handle at the back 
of the cleaner. Always place 
the vacuum cleaner on the 
floor with the handle in upright 
position when using tools. 
Never place your fingers under 
the cleaner when it is running. 
Never place powerfoot on 
furniture or uneven surfaces. 
Do not place vacuum cleaner 
close enough to objects to pull 
them into rotating brush.
Tip:
Hair, string and small 
objects can block the 
vacuum hose or 
tools. Check them 
occasionally  for 
obstructions.
NOTICE: While vacuuming, certain carpets 
and low humidity conditions may 
generate small static discharges. 
The  discharges  are entirely 
harmless and are not associated 
in any way with the main 
power supply.
ug110-4049_82H5_1008.indd   7 ug110-4049_82H5_1008.indd   7 10/14/08   2:40:13 PM
10/14/08   2:40:13 PM 
						

							 8www.bissell.com 
Maintenance and care
To maintain maximum cleaning performance 
from your BISSELL PowerForce Turbo Bagless, 
perform these simple maintenance steps.
1.  Empty the dirt container when the dirt reaches the “Full” line on the side. 
2.  Check the inner and outer circular filters,  and the pre-motor filter at least once a 
month and clean or replace as needed.
3.  Replace the HEPA media post-motor filter  every three to six months.
Note: More frequent filter cleaning or 
replacing may be necessary if you are 
vacuuming new carpet, fine dust, or have 
allergy concerns. Follow the instructions on 
the following pages to perform these simple 
maintenance steps.
Emptying dirt container 
The dirt container needs to be emptied when 
the dirt reaches the “Full” line on the side of the 
container.
1.  Unplug cleaner from electrical outlet.
2.  Slide the Lock ‘n Seal lever to the Unlock position.
3.  Grasp handle and pull dirt container straight  out to remove from vacuum.
4.  Empty dirt into garbage container.
5.  Put dirt container back in the vacuum and  slide the lever to the Lock position.
Note: The dirt container may be washed in 
warm water with a mild detergent. Remove 
the filter cup from the bottom before 
washing. Make sure it is completely dry 
before reassembling with the filter cup.
WARNING: 
To reduce the risk of electric 
shock, turn power switch OFF 
and disconnect plug from 
electrical outlet before 
performing maintenance or 
troubleshooting checks.
Tip:
For maximum cleaning 
performance, check 
and clean or replace all 
filters as suggested.
Lock PositionUnlock 
Position Full Line
ug110-4049_82H5_1008.indd   8 ug110-4049_82H5_1008.indd   8
10/14/08   2:40:21 PM
10/14/08   2:40:21 PM 
						

							16www.bissell.com 
Cleaning the inner & outer circular filters 
Use only BISSELL Style 12 replacement filters in 
your BISSELL PowerForce Turbo Bagless.
1.  Unplug cleaner from electrical outlet.
2.  Remove the dirt container as described in the previous section. Grasp the filter cup 
located at the bottom of the dirt container 
and twist counterclockwise to unlock and 
remove.
3.  Grasp the circular filters and pull straight up  to remove.
4.  Separate the outer foam and inner pleated  circular filters. Wash each individually by 
hand in warm water. Mild detergent may be 
used if desired. Rinse well, then air dry 
thoroughly before putting them back 
together and replacing in filter cup.
5.  The filter cup may be washed in warm water  with a mild detergent. Make sure it is completely 
dry before reassembling with filters.
6.  The upper tank and primary separator may  be wiped clean with a damp cloth. Reach 
underneath the upper tank and turn the 
rim of the primary separator to unlock. Pull 
straight down to remove.
Cleaning the pre-motor filter 
1.  Unplug the cleaner from electrical outlet.
2.  The pre-motor filter protects the motor from debris. It is located underneath the dirt 
container and filter cup in the center of the 
round part of the Lock ‘n Seal lever.
3.  Remove the small, round, pre-motor filter and  any debris on top of it. Rinse well under warm 
water, then air dry thoroughly before replacing.
Maintenance and care
 9
WARNING: Do not operate cleaner 
with damp or wet 
filters or without all 
filters in place.
Pre-Motor 
Filter
NOTICE: This product is intended for household 
use only and not for commercial or 
industrial use.  Vacuuming of dust 
from products like plaster, concrete or 
ashes will damage the motor and void 
the warranty.
ug110-4049_82H5_1008.indd   9 ug110-4049_82H5_1008.indd   9 10/14/08   2:40:31 PM
10/14/08   2:40:31 PM 
						

							10www.bissell.com 
Maintenance and care
Replacing the HEPA media post-motor filter 
Use only BISSELL Style 12 HEPA filter in your 
BISSELL PowerForce Turbo Bagless.
1.  Unplug cleaner from electrical outlet.
2.  The HEPA media post-motor filter assists in the filtration process to return clean air to the 
room. It is located behind the door on the front 
of the cleaner. When the filter becomes dirty, 
open the door, remove the filter and replace.
Note: This filter is not washable and must be 
replaced.
3.  Replace the door by inserting the tabs on the left side and snapping the right side into place.
Maintaining the TurboBrush
The TurboBrush should be checked regularly for clogs 
or debris wrapping around the brush roll.
1.  Remove TurboBrush tool from hose or front of vacuum.
2.  Twist collar so opening is at the top and lift top  cover to remove.
3.  Remove brush from belt and clean debris.
4.  Replace brush inside belt and place ends into  slots on sides.
5.  Reposition top cover, making sure to line up  the inside tab at the front with the opening on 
the cover. Twist collar until opening is at the 
bottom to lock into place.
WARNING: To reduce the risk of 
injury from moving parts, 
turn the power switch OFF 
and disconnect plug from 
electrical outlet.
HEPA 
Media 
Post-Motor 
Filter
ug110-4049_82H5_1008.indd   10 ug110-4049_82H5_1008.indd   10 10/14/08   2:40:38 PM
10/14/08   2:40:38 PM