Bisell PowerForce Turbo Bagless 82H5E User Manual

USER’S GUIDE82H5 SERIES 220-240V
3Safety Instructions
4Product View
5-6 Assembly
6-7
Operation  
8-12 Maintenance and Care
13-14 Troubleshooting
14Consumer Services
15 Replacement Parts
16Warranty
PowerForce™ 
Turbo
BAGLESS
ug110-4049_82H5_1008.indd   1
ug110-4049_82H5_1008.indd   1 10/14/08   2:39:30 PM
10/14/08   2:39:30 PM 

2
Thank you for buying a BISSELL PowerForce™ Turbo Bagless Vacuum 
 2www.bissell.com 
We’re glad you purchased a BISSELL PowerForce Turbo Bagless Vacuum. 
Everything we know about floor care went into the design and constructio\
n of 
this powerful, high-tech home vacuuming system. 
Your BISSELL PowerForce Turbo Bagless is well made, and we back it with a 
limited one year warranty. We also stand behind it with a knowledgeable, 
dedicated Consumer Services Department, so, should you ever have a probl\...

 3www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, 
basic precautions should be observed, 
including the following:
READ ALL INSTRUCTIONS  BEFORE USING YOUR 
UPRIGHT VACUUM. 
WARNING: To reduce 
the risk of fire, electric shock, 
or injury:
 
■ Use indoors only.
■  Do not leave machine when it is plugged in.
■  Do not use with damaged cord or plug.
■  If appliance is not working as it should, has been 
dropped, damaged, left outdoors, or dropped into water, 
return it to...

 4www.bissell.com 
CAUTION: Do not plug in your 
vacuum cleaner until 
you are familiar with 
all instructions and 
operating  procedures.
Handle
TurboBrush
™
PowerfootFurniture Protection Guard
Height 
Adjustment 
Knob
Product view
Carrying
Handle
Power Switch Crevice Tool
Quick Reach
™ 
Handle
Handle
Release 
Pedal Deluxe Stretch 
Hose 
Extension Wand
Combination 
Dusting Brush/ 
Upholstery Tool
Hose Wand
Hose 
Wand Base
Foot Hose Hose Clip
Cord Clip
Twist n Snap
™
Hose Connector
HEPA Media
Post-Motor...

 5www.bissell.com 
How to use this guide
Assembly
This User’s Guide has been designed to help 
you get the most satisfaction from your BISSELL 
PowerForce Turbo Bagless. You’ll find assembly and 
operating instructions, safety precautions, as well 
as maintenance and troubleshooting instructions. 
Please read this Users Guide thoroughly before 
assembling your vacuum cleaner. 
Pay particular attention to the product diagram, 
assembly instructions, and part names. Locate 
and organize all parts before...

16www.bissell.com 
Attach vacuum hose and tools continued
7.  Place the TurboBrush in the bracket by aligning the bottom of the bracket with the opening of the 
brush roll and snap the TurboBrush into place.
Handle position
Press the handle release pedal with your foot to 
place your BISSELL PowerForce Turbo Bagless 
into one of three cleaning positions.
1. Upright- For storage and above floor 
cleaning with special tools.
2.  Normal Cleaning- Press handle release 
pedal once. Use for most household...

 7www.bissell.com 
Special tools
Your BISSELL PowerForce Turbo Bagless is not 
only a powerful carpet and rug vacuum cleaner, 
it’s also a versatile above floor vacuum cleaner 
when you select one of the special tools.
1.  Raise handle to upright position.
2.  Grasp the Quick Reach handle and lift hose wand to separate from suction intake opening.
3.  Attach tools by firmly pushing onto vacuum  hose or extension wand.
  Combination Dusting Brush/Upholstery Tool: 
Two types of cleaning tools are included...

 8www.bissell.com 
Maintenance and care
To maintain maximum cleaning performance 
from your BISSELL PowerForce Turbo Bagless, 
perform these simple maintenance steps.
1.  Empty the dirt container when the dirt reaches the “Full” line on the side. 
2.  Check the inner and outer circular filters,  and the pre-motor filter at least once a 
month and clean or replace as needed.
3.  Replace the HEPA media post-motor filter  every three to six months.
Note: More frequent filter cleaning or 
replacing may be...

16www.bissell.com 
Cleaning the inner & outer circular filters 
Use only BISSELL Style 12 replacement filters in 
your BISSELL PowerForce Turbo Bagless.
1.  Unplug cleaner from electrical outlet.
2.  Remove the dirt container as described in the previous section. Grasp the filter cup 
located at the bottom of the dirt container 
and twist counterclockwise to unlock and 
remove.
3.  Grasp the circular filters and pull straight up  to remove.
4.  Separate the outer foam and inner pleated  circular filters....

10www.bissell.com 
Maintenance and care
Replacing the HEPA media post-motor filter 
Use only BISSELL Style 12 HEPA filter in your 
BISSELL PowerForce Turbo Bagless.
1.  Unplug cleaner from electrical outlet.
2.  The HEPA media post-motor filter assists in the filtration process to return clean air to the 
room. It is located behind the door on the front 
of the cleaner. When the filter becomes dirty, 
open the door, remove the filter and replace.
Note: This filter is not washable and must be 
replaced....