BenQ Sp920 Digital Projector User Manual

  31
  Operation
EnglishOptimizing the image
Using Wall Color
In the situation where you are projecting onto a colored surface such as a painted wall which may not be white, 
the Wall Color feature can help correct the projected picture’s color to prevent possible color difference between 
the source and projected pictures.
To use this function, go to the DISPLAY > Wall Color menu and press  /  to select a color which is the closest 
to the color of the projection surface. There are several precalibrated...

32 Operation  
EnglishSetting the User 1/User 2 mode
There are two user-definable modes if the current available picture modes are not suitable for your need. You can 
use one of the picture modes (except the User 1/2) as a starting point and customize the settings.
1. Press MENU/EXIT and then press  /  until the PICTURE menu is highlighted.
2. Press  to highlight Picture Mode and press / to select User 1 or User 2.
3. Press  to highlight Reference Mode.
This function is only available when User 1, or...

  33
  Operation
EnglishAdjusting Brilliant Color
Highlight Brilliant Color in the PICTURE menu and select by pressing  / on the projector or remote 
control.
This feature utilizes a new color-processing algorithm and system level enhancements to enable higher brightness 
while providing truer, more vibrant colors in picture. It enables a greater than 50% brightness increase in mid-
tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and 
true...

34 Operation  
EnglishPlease refer to the illustration to the right for how the colors 
relate to each other.
For example, if you select Red and set its range at 0, only pure 
red in the projected picture will be selected. Increasing its range 
will include red close to yellow and red close to magenta.
5. Press   to highlight Saturation and adjust its values to your 
preference by pressing  / . Every adjustment made will 
reflect to the image immediately.
For example, if you select Red and set its value...

  35
  Operation
English5. Press  to highlight Timer Counting Direction and select your desired counting direction by pressing  /
.
6. Press   to highlight Timer Audible Reminder and decide if you 
want to activate the sound reminder by pressing  / . If you 
select On, a double beep sound will be heard at the last 30 
seconds of counting down/up, and a triple beep sound will be 
generated when the timer is up.
7. To activate the presentation timer, press   and press  /  to 
highlight On and press ENTER....

36 Operation  
EnglishHiding the image
In order to draw the audiences full attention to the presenter, you can 
use BLANK on the projector or remote control to hide the screen image. 
The word BLANK appears in the corner of the screen while the image is 
hidden. When this function is activated with an audio input connected, 
the audio can still be heard. 
You can set the blank time in the SYSTEM SETUP: Basic > Blank Timer 
menu to let the projector return the image automatically after a period 
of time...

  37
  Operation
EnglishLocking control keys
With the control keys on the projector locked, you can prevent your projector settings from being changed 
accidentally (by children, for example). When the Panel Key Lock is on, no control keys on the projector will 
operate except Power.
1. Press  /  or go to the SYSTEM SETUP: Basic > Panel Key Lock 
menu, and select On by pressing  / . A confirmation message 
displays. 
2. Highlight Ye s and press ENTER to confirm.
To release panel key lock, press and hold...

38 Operation  
EnglishCreating your own startup screen
In addition to selecting the projector preset startup screen from among BenQ logo, Black or Blue screen, you can 
make your own startup screen that is a picture projected from your computer or video source.
To create your own startup screen, project the picture you want to use as your startup screen from either a 
computer or video source. The rest steps are as follows.
• Using the remote control
1. Press CAPTURE. 
2. A confirmation message displays....

  39
  Operation
EnglishSetting the lamp mode
This projector is capable of dual-lamp projection and provides three lamp modes for different purposes:
You can perform the following steps to choose a lamp mode according to your preference.
1. Press MENU/EXIT and then press  /  until the SYSTEM SETUP: Advanced menu is highlighted.
2. Press   to highlight Lamp Settings and press ENTER. 
3. Press   to highlight Lamp Mode and press ENTER.
4. Press   to highlight your preferred lamp mode and press ENTER.
5. A...

40 Operation  
EnglishShutting down the projector
1. Press Power and a confirmation message displays 
prompting you.
If you dont respond in a few seconds, the message will 
disappear.
If you want to cancel the message, press any key except 
PAGE / and LASER on the remote control.
Do not look into the laser light window or shine the laser 
light beam on yourself or others. See the warning 
messages on the back of the remote control prior to 
using it.
2. Press Power a second time. The POWER indicator...