BenQ Sp920 Digital Projector User Manual

SP920 Digital Projector
User Manual
Welcome 

2  Table of contents  
EnglishTa b l e  o f  c o n t e n t s
Important safety instructions ..... 3
Introduction ................................ 6
Projector features ............................ 6
Shipping contents ........................... 7
Projector exterior view ................... 8
Controls and functions................... 9
Projector ..................................................9
Remote control ......................................10
Positioning your projector ........ 12
Choosing a...

  3
  Important safety instructions
EnglishThank you for your purchase of this quality BenQ projector! It has been designed to provide you with an 
enjoyable viewing experience in various situations. For the best results, please read this manual through carefully 
as it is your guide through the control menus and operation.
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information technology 
equipment. However, to ensure safe use of this...

4 Important safety instructions  
English  
       
5. In areas where the mains voltage may 
fluctuate or cut out, it is recommended that 
you connect your projector through a power 
stabilizer, surge protector or uninterruptible 
power supply (UPS). 
6. The lamp becomes extremely hot during 
operation. Allow the projector to cool for 
approximately 45 minutes prior to removing 
the lamp assembly for replacement. 
7. Do not operate lamps beyond the rated lamp 
life. Excessive operation of lamps beyond...

  5
  Important safety instructions
English12.  Always place the projector on a level, 
horizontal surface during operation.
- Do not use if tilted at an angle of more than 
10 degrees left to right, nor at angle of more 
than 15 degrees front to back. Using the 
projector when it is not fully horizontal may 
cause a malfunction of, or damage to, the 
lamp. 
13. Do not stand the projector on end vertically. 
Doing so may cause the projector to fall over, 
causing injury or resulting in damage to the...

6 Introduction  
EnglishIntroduction
Projector features
The projector integrates high-performance optical engine projection and a user-friendly design to deliver high 
reliability and ease of use.
The projector offers the following features.
• Selectable dual-lamp projection capable of displaying super-bright images
• Wall color correction allowing projection on surfaces of several predefined colors
• Quick auto search speeding up the signal detecting process
• Selectable password protected function
• Up...

  7
  Introduction
EnglishShipping contents
Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please 
contact your place of purchase.
Standard accessories
The supplied accessories will be suitable for your region, and may differ from those illustrated.
*The warranty card is only supplied in some specific regions. Please consult your dealer for detailed 
information.
Optional accessories
If you need to purchase the accessories listed below, please...

8 Introduction  
EnglishProjector exterior view
1. Lamp cover
2. Vent (heated air exhaust)
3. Projection lens
4. External control panel
(See page 9 for details.)
5. Focus ring and Zoom ring
(See page 9 for details.)
6. Vent (cool air intake)
7. Front IR remote sensor
8. AC power cord inlet
9. Adjuster feet
10. Kensington anti-theft lock slot
11. Speaker grill
12. Ceiling mount holes
13. Rear IR remote sensor
14. Wired remote control port
15. Audio signal input socket
16. RS232 control port
17. USB...

  9
  Introduction
EnglishControls and functions
Projector
1. Focus ring
Adjusts the focus of the projected picture. See 
Fine-tuning the image size and clarity on page 28 
for details.
2. Zoom ring
Adjusts the size of the projected picture. See Fine-
tuning the image size and clarity on page 28 for 
details.
3. POWER indicator light
Lights up or flashes when the projector is under 
operation. See Indicators on page 50 for details.
4. Power
Toggles the projector between standby mode and 
on. See Starting...

10 Introduction  
EnglishRemote control
1. Power
Toggles the projector between standby mode and 
on. See Starting up the projector on page 23 and 
Shutting down the projector on page 40 for 
details.
2.ASPECT
Selects the display aspect ratio. See Selecting the 
aspect ratio on page 30 for details.
3.CAPTURE
Captures the projected picture and save it as your 
startup screen. See Creating your own startup 
screen on page 38 for details.
4. Keystone/Arrow keys ( / Up,  / Down)
Manually corrects distorted...