BenQ Sh910 Digital Projector User Manual

Operation 51 ii. You can select to stop/start displaying desktop contents to connected network 
display.
iii. 4-1 Display (up to 4 computers can shoot to 1 projector at the same time). Click 
the location you want to display. 4locations can be chosen (1-4) or 2 places (L and 
R) if it’s 2 computers. Once you click the place you want to display, the image 
appers on th eprojector. You can change th elocation anytime you want, even back 
to full screen or blank out.
The Basic and Advanced Settings pages...

Operation 52vii. You can select Video or Graphic display mode. Graphic Mode: worse image 
quality but faster tramsmission speed. Video Mode: better image quality but 
slower transmission speed. However, the actual transmission performance was 
determined by the status of network usage at that time.
viii.You can select whether to automatically open the Q Presenter application when 
the computer is powered on.
ix. Once set, press Apply to save the changes.
x. You can link to the BenQ remote network...

Operation 53
Using the Web Control Lock
This function is designed to prevent unauthorized people from maliciously changing the 
projector settings through the Projector Network Display System.
To enable the function:
1. After your computer is connected to the projector, enter the address of the projector in 
the address bar of your browser and press Enter.
2. Go to the Admin page of the Projector Network Display System.
3. Enter the current password.
4. Click ON in the Web Control Lock row.
The next time...

Operation 54
Using the Projection Login Code
This function is designed to ensure network display through the correct projector. To toggle 
this function:
1. Go to the SYSTEM SETUP: Advanced > Network Settings menu after opening the 
OSD menu system. Press MODE/ENTER.
2. Press  to highlight Projection Log in Code and press  /  to select On or Off.
When this function is on, the projector generates a random 4-digit code in the upper right 
corner when you switch the source to Network Display. You need to...

Operation 55
Presenting From a USB Reader
This fature displays a slide show of images stored on a USB flash drive connected to the 
projector. It can eliminate the need for a computer source.
Image File Types
USB Reader displays images files in JPEG, GIF, TIFF, PNG and BMP formats.
• A square box will display on the filename for unidentified characters.
• Thai filename is not supported.
• Files in GIF, TIFF, PNG and BMP formats can be displayed for the file size smaller than 
WXGA (1280 x 800) only.
• If...

Operation 56ii. Selected folder
iii. Supported file format
iv. Unsupported file format
v. Current path and page number
During slideshow:To P r e s s
open folder Enter
scroll through thumbnails four arrow keys
return to a previous page Auto
exit USB Reader Exit
change to a different page
/ 
go back to the first page of that folder Back
start slide show Slideshow when an image is highlighted.
adjust USB Reader settings Setting
To P r e s s
go to previous or next image
/  

Operation 57 Settings page:
i. You can adjust order settings.
ii. You can adjust Slideshow settings.
iii. Press OK to save the settings.
iv. Press Cancel to ignore the change. rotate the image by 90 degree clockwise/
counterclockwise/
(Rotation is temporary; the image returns to 
its original orientation when you go back to 
thumbnails)
return to a previous page Auto
start/stop slideshow Enter
ii
iiiiv
i 

Operation 58
Remote Desktop Control through Q Presenter
The Q Presenter can proceed the Remote Desktop Control (RDC) the host PC from 
projector site.
1. Setup the RDC login account (User name and Password ) in Q Presenter.
• Name: must be 8 English capital letters A~Z and number 0 ~9.
• Password: must be 6 digits and limit the range from 1~4.
• If there are lot of audience is watching the display while the user is entering the 
password, the number will be transferred to up, left, down, right in order...

Operation 59 3. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Network Settings 
menu. Press MODE/ENTER.
4. Highlight Remote Desktop and press MODE/
ENTER.
5. Enter the Account and Password the same as step 
1.
6. Highlight Connect and press MODE/ENTER to 
connect the selected PC.
7. Connect USB keyboard or mouse to control the 
host PC’s desktop through the projector.
• Remote Desktop Control does not support PC Standby mode.
• Remote Desktop Control only supports LAN source so the projector...

Operation 60
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
Main menu Sub-menu Options
1. 
DISPLAY
Wall ColorOff/Light Yellow/Pink/Light 
Green/Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9/16:10
Auto Keystone On/Off
Keystone
Position
Phase
H. Size
Digital Zoom
PIPPIP On/Off
Main Source
HDMI/Video/S-Video/
Component/PC
Second Source
Active WindowMain/PIP
PositionTop-Right/Bottom-Left/Bottom-
Right/Top-Left
SizeLarge/Small...