BenQ Projector I500 User Manual

  21
• Operating the projector from the front 
• Operating the projector from the rear 

22
InstallationChoosing a locationBefore choosing an installation location for your projector, take the following factors into consideration:
• Size and position of your screen
• Electrical outlet location
• Location and distance between the projector and the rest of your equipment
• Location and distance between the projector and the wireless access point, or if using a LAN cable, the internet hub. 
You can install your projector in the following ways.
1.  Front:
Select this location with the projector...

  23
3.  Front Ceiling:
Select this location with the projector elevated near the ceiling in front of the screen.
Turn on the projector and make the following settings:
MENU > Settings > Projector Position > Front Ceiling
The projector does not feature ceiling mount components/equipment so when choosing to use a front ceiling location you must place 
it on an elevated location of your choice.
4.  Rear Ceiling:
Select this location with the projector elevated from the ceiling behind the screen.
Turn on...

24
Obtaining a preferred projected image sizeThe projected image size is determined by the distance from the projector lens to the screen, and the video format.Projection dimensionsUse the illustration and tables below to help you determine the projection distance.
Screen size
Projector distance (mm)
Diagonal
H (mm)
W (mm)
Average
Max. distance
Inch
mm
60 1524 808 1292 388 775
70 1778 942 1508 452 905
80 2032 1077 1723 517 1034
90 2286 1212 1939 582 1163
100 2540 1346 2154 646 1292
120 3048 1615 2585 775...

  25
140 3556 1885 3015 905 1809
160 4064 2154 3446 1034 2068
180 4572 2423 3877 1163 2326
200 5080 2692 4308 1292 2585
All measurements are approximate and may vary from the actual sizes. If you want a permanent installation of the projector, we recommend that you 
use the actual projector to physically test the projection size, distance, and the projectors optical characteristics prior to the installation. This helps 
you determine the exact mounting position which best suits your installation.
Screen...

26
ConnectionWhen connecting a signal source to the projector, be sure to:
1.  Turn all equipment off before making any connections.
2.  Use the correct signal cables for each source.
3.  Make sure the cables are firmly inserted.
4.  Place the projector within range of the wireless AP you plan to connect it to.
1
1
2
4
5
3
44
Notebook or 
Desktop ComputerA/V Device
Internet Hub
Wireless AP
Smartphone or 
Ta b l e t  P C Microphone
Speakers 

  27
1.  HDMI cable
2.  VGA cable
3.  HDMI to Micro USB cable
4.  Audio 3.5” cable
5.  LAN RJ-45 cableConnecting with video equipmentYou only need to connect the projector to a video source device using just one of the following connecting methods. Each video source provides 
different picture quality. The method you choose most likely depends upon the availability of matching terminals on both the projector and the video 
source device as described below:
•  In the connection illustrations shown above,...

28
Connecting HDMI devicesHDMI (High-Definition Multimedia Interface) supports uncompressed video data transmission between compatible devices like DTV tuners, DVD 
players, Blu-ray players and displays over a single cable. You should use an HDMI cable when making a connection between the projector and HDMI 
devices.
HDMI device: DVD player, digital tuner, etc.
HDMI cable 

  29
Connecting with a computerUsing a VGA cableConnect the projector to a computer with a VGA cable, and a separate audio cable (only if you want to broadcast audio from the computer).Using an HDMI cableConnect the projector to a computer with an HDMI cable.
Notebook or 
Desktop Computer
VGA Cable Audio CableNotebook or 
Desktop Computer
HDMI Cable 

30
Connecting a USB flash drive Connect a USB flash drive to one of the USB ports on the rear of the projector to view media files stored on the flash drive.
•  Some computers feature HDMI ports that do not transmit audio, in such cases a separate audio cable must be connected to the projector.
•  Many laptops do not turn on their external video ports when connected to a projector. Usually a key combination like Fn + F3 or CRT/LCD key turns the external 
display on/off. Locate a function key labeled...