BenQ Mx766/mw767/mx822st Digital Projector User Manual

Operation71
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
Main menu Sub-menu Options
1.
DISPLAY
Wall ColorOff/Light Yellow/Pink/Light Green/
Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9/16:10
Keystone
Position
Phase
H. Size
Digital Zoom
3D3D modeAuto/Top Bottom/Frame 
sequential/Frame packing/Side by 
side/Off
3D Sync Invert Disable/Invert
Teaching 
Te m p l a t eBlackboardOff/Letter Formation/Worksheet/
Coordinate Chart...

Operation 72
4.
SYSTEM
SETUP: Basic
Presentation 
TimerTimer Period1~240 minutes
Timer Display Always/3 min/2 min/1 min/Never
Timer PositionTop-Left/Bottom-Left/Top-Right/
Bottom-Right
Timer Counting 
DirectionCount Down/Count Up
Sound ReminderOn/Off
On/Off Yes/No
Language
Projector 
InstallationFront Table/Rear Table/Rear 
Ceiling/Front Ceiling
Menu SettingsMenu display time5 secs/10 secs/20 secs/30 secs/
Always
Menu positionCenter/Top-left/Top-right/Bottom-
right/Bottom-left
Reminder
MessageOn/Off...

Operation73
5.
SYSTEM 
SETUP: 
Advanced
High Altitude 
ModeOn/OffYe s /No
Audio SettingsMuteOn/Off
Volume0~10
Microphone 
Volume0~10
Power on/off Ring 
ToneOn/Off
Lamp SettingsLamp ModeNormal/Economic/SmartEco
Reset lamp timerReset/Cancel
Equivalent lamp
Security 
SettingsChange password
Change SecurityPower on Lock
Web Control Lock
Baud Rate2400/4800/9600/14400/19200/ 
38400/57600/115200
Test PatternOn/Off
Closed CaptionClosed Caption 
EnableOn/Off
Caption Version CC1/CC2/CC3/CC4
Standby...

Operation 74Note that the menu items are available when the projector detects at least one valid signal. 
If there is no equipment connected to the projector or no signal detected, limited menu 
items are accessible.
5.
SYSTEM 
SETUP: 
AdvancedNetwork 
SettingsWired LANStatus
DHCP
IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
Wireless LANStatus
SSID
IP Address
Connection Mode
Apply
Remote DesktopAccount
Password
Connect
Projection Log in 
codeOn/Off
BroadcastingBroadcasting
Channel
IP Address...

Operation75
Description of each menu
• The default values listed in this manual, especially on pages 75-85, are for reference only. 
They may vary between the projectors due to the continuous improvement to the  
products.
FUNCTIONDESCRIPTION
Wall ColorCorrects the projected picture’s color when the projection surface is 
not white. See "Using Wall Color" on page 40 for details.
Aspect Ratio
There are four options to set the image's aspect ratio depending on 
your input signal source. See...

Operation 76
FUNCTIONDESCRIPTION
3D
This projector features a 3D function which enables you to enjoy the 
3D movies, videos, and sporting events in a more realistic way by 
presenting the depth of the images. You need to wear a pair of 3D 
glasses to view the 3D images.
3D Mode
The default setting is Auto and the projector automatically chooses 
an appropriate 3D format when detecting 3D contents. If the 
projector cannot recognize the 3D format, press  /  to choose a 
3D mode.
3D Sync Invert
When you...

Operation77
FUNCTIONDESCRIPTION
Picture Mode
Pre-defined picture modes are provided so you can optimize your 
projector image set-up to suit your program type. See "Selecting a 
picture mode" on page 39 for details.
Reference Mode
Selects a picture mode that best suits your need for the image quality 
and further fine-tune the image based on the selections listed on the 
same page below. See "Setting the User 1/User 2 mode" on page 40
for details.
This function is only available when User...

Operation 78
FUNCTIONDESCRIPTION
Brilliant Color
Adjusts white peaking while maintaining correct color presentation. 
See"Adjusting Brilliant Color" on page 41 for details.
This function is only available when User 1/2 is selected.
Color Temperature
See"Selecting a Color Temperature" on page 41 for details.
This function is only available when User 1/2 is selected.
Color Temperature 
Fine Tuning
See"Setting a preferred color temperature" on page 41 for details.
3D Color...

Operation79
FUNCTIONDESCRIPTION
Presentation Timer
Reminds the presenter to finish the presentation within a certain 
time frame. See "Setting the presentation timer" on page 43 for 
details.
Timer Period
Sets a preferred length of time for presentation.
Timer Display
Sets whether to display the timer on screen.
Timer Position
Sets the position where the timer displays on screen.
Timer Counting Direction
Sets the timer counting direction.
Sound Reminder
Sets a sound reminder if timer is up....

Operation 80
Operation Settings
Direct Power On
Selecting On enables the function. See "Starting up the projector" on 
page 29 for details.
Signal Power On
SelectingOn the projector will turn on automatically when VGA 
signal is detected. 
SelectingOff the projector has to be turnned 
on manually (by keypad or remote).
 See "Starting up the projector" 
on page 29 for details.
Auto Power Off
Allows the projector to turn off automatically if no input signal is 
detected after a set period...