BenQ Mx766/mw767/mx822st Digital Projector User Manual

Operation61 ii. You can select to Play/Pause displaying desktop contents to connected network 
display.
iii. 4-1 Display (up to 4 computers can shoot to 1 projector at the same time). Click 
the location you want to display. 4locations can be chosen (1-4) or 2 places (L 
and R) if it’s 2 computers. Once you click the place you want to display, the image 
appers on th eprojector. You can change th elocation anytime you want, even 
back to full screen or blank out.
The Basic and Advanced Settings pages...

Operation 62vii. You can select Video or Graphic display mode. Graphic Mode: worse image 
quality but faster tramsmission speed. Video Mode: better image quality but 
slower transmission speed. However, the actual transmission performance was 
determined by the status of network usage at that time.
viii. You can select whether to automatically open the Q Presenter application when 
the computer is powered on.
ix. Once set, press Apply to save the changes.
x. You can link to the BenQ remote network...

Operation63
Using the Web Control Lock
This function is designed to prevent unauthorized people from maliciously changing the 
projector settings through the Projector Network Display System. 
To enable the function:
1. After your computer is connected to the projector, enter the address of the 
projector in the address bar of your browser and press Enter.
2. Go to the Admin page of the Projector Network Display System.
3. Enter the current password.
4. Click ON in the Web Control Lock row.
The next time...

Operation 64
Using the broadcassting function
When it comes to 1:N LAN Dispaly,there are two ways to do this function:
1. By TCP/IP (support up to 8 porjectors, original design)
2. By Multicast(support up to 255 projectors, this new design)
You can select channel 1, 2, 3, 4, 5,6...25 with showing the corrspondent IP(gray out).
There are 1~25 channels (25IPs) for you to select freely:
239.192.19.21~239.192.19.45
If the channel is fixed at emergency channel, when projector detects image coming in from...

Operation65 2. Turn on your projector if needed.
3. Remove the USB flash drive from your computer and plug it into the USB TYPE-A 
jack of the projector.
4. The thumbnails display.
Controlling USB Reader
While viewing thumbnails:
i. Thumbnails
ii. Selected folder
iii. Supported file format
ToPress
open folder Enter
scroll through thumbnails four arrow keys
return to a previous page Auto
exit USB Reader Exit
change to a different page
/
go back to the first page of that folder Back
start slide show...

Operation 66During slideshow:
ToPress
go to previous or next image
/
rotate the image by 90 degree clockwise/
counterclockwise/
(Rotation is temporary; the image returns to 
its original orientation when you go back to 
thumbnails)
start/stop slideshow Enter
return to a previous page Auto 

Operation67 Settings page:
i. You can adjust order settings.
ii. You can adjust Slideshow settings.
iii. Press OK to save the settings.
iv. Press Cancel to ignore the change.
ii
iiiiv
i 

Operation 68
Remote Desktop Control through Q 
Presenter
The Q Presenter can proceed the Remote Desktop Control (RDC) the host PC from 
projector site.
1. Setup the RDC login account (User name and Password ) in Q Presenter.
• Name: must be 8 English capital letters A~Z and number 0 ~9.
• Password: must be 6 digits and limit the range from 1~4.
• If there are lot of audience is watching the display while the user is entering the 
password, the number will be transferred to up, left, down, right in order...

Operation69 3. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Network 
Settings menu. Press MODE/ENTER.
4. Highlight Remote Desktop and press MODE/
ENTER.
5. Enter the Account and Password the same as 
step 1.
6. Highlight Connect and press MODE/ENTER 
to connect the selected PC.
7. Connect USB keyboard or mouse to control the 
host PC’s desktop through the projector.
• Remote Desktop Control does not support PC Standby mode.
• Remote Desktop Control only supports LAN source so the projector...

Operation 70
Po i n t D r aw ™ Pe n
The PointDraw™ pen works like a wireless mouse - but one that works in midair, not on 
your desktop. Just hold the pen in your hand, and point it at the projected image to point, 
click and drag. Please find latest compatible PointDraw™ pen user guide for more detail.
Shutting down the projector
1. Press Power on the projector. A 
confirmation message displays prompting you. 
If you don't respond in a few seconds, the 
message will disappear. If you use the remote...