BenQ Mx766/mw767/mx822st Digital Projector User Manual

							Digital Projector
User Manual
MX766/MW767/MX822ST 
						

							Table of contents 2
Important safety 
instructions ................... 3
Introduction.................. 7
Projector features ..................................... 7
Shipping contents ...................................... 8
Projector exterior view.........................10
Controls and functions ..........................12
Positioning your 
projector ..................... 17
Choosing a location ................................17
Obtaining a preferred projected image 
size ..............................................................18
Connection ................. 21
Connecting a computer or monitor...23
Connecting Video source devices .......25
Connecting with document camera ...28
Operation ................... 29
Starting up the projector ......................29
Adjusting the projected image .............30
Using the menus ......................................33
Securing the projector ...........................34
Switching input signal .............................36
Magnifying and searching for details ...37
Selecting the aspect ratio ......................38
Optimizing the image .............................39
Setting the presentation timer .............43
Remote paging operations ....................44
Hiding the image......................................44
Freezing the image ..................................44
Operating in a high altitude 
environment .............................................45
Adjusting the sound ................................45Personalizing the projector menu 
display ........................................................ 46
Select the lamp saver mode ................. 47
Use Teaching Template......................... 48
Controlling the projector through a LAN 
environment............................................. 49
Displaying image through Q Presenter ..
.................................................................... 59
Using the Web Control Lock .............. 63
Using the Projection Login Code ....... 63
Using the broadcassting function ........ 64
Presenting From a USB Reader........... 64
Remote Desktop Control through Q 
Presenter .................................................. 68
PointDraw™ Pen ................................... 70
Shutting down the projector ............... 70
Menu operation ...................................... 71
Maintenance ............... 86
Care of the projector ............................ 86
Lamp information ................................... 87
Troubleshooting......... 95
Specifications.............. 96
Dimensions .............................................. 97
Ceiling mount installation ..................... 98
Wall mount installation ......................... 99
Timing chart ........................................... 101
Warranty and Copyright 
information ............... 107
Ta b l e  o f  c o n t e n t s 
						

							Important safety instructions 3
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information 
technology equipment. However, to ensure safe use of this product, it is important that 
you follow the instructions mentioned in this manual and marked on the product. 
Safety Instructions
1.Please read this manual before 
you operate your projector. Save 
it for future reference. 
2.Do not look straight at the 
projector lens during operation.
The intense light beam may damage 
your eyes. 
3.Refer servicing to qualified 
service personnel.4.Always open the lens shutter or 
remove the lens cap when the 
projector lamp is on.
5. In some countries, the line voltage is 
NOT stable. This projector is 
designed to operate safely within a 
mains voltage between 100 to 240 
volts AC, but could fail if power cuts 
or surges of r10 volts occur. In 
areas where the mains voltage 
may fluctuate or cut out, it is 
recommended that you connect 
your projector through a power 
stabilizer, surge protector or 
uninterruptible power supply 
(UPS). 
6. Do not block the projection lens with 
any objects when the projector is 
under operation as this could cause 
the objects to become heated and 
deformed or even cause a fire. 
						

							Important safety instructions 4
Safety Instructions (Continued)
7. The lamp becomes extremely hot 
during operation. Allow the 
projector to cool for approximately 
45 minutes prior to removing the 
lamp assembly for replacement. 
8. Do not operate lamps beyond the 
rated lamp life. Excessive operation 
of lamps beyond the rated life could 
cause them to break on rare 
occasions. 
9. Never replace the lamp assembly or 
any electronic components unless 
the projector is unplugged. 10. Do not place this product on an 
unstable cart, stand, or table. The 
product may fall, sustaining serious 
damage. 
11. Do not attempt to disassemble this 
projector. There are dangerous high 
voltages inside which may cause 
death if you should come into 
contact with live parts. The only 
user serviceable part is the lamp 
which has its own removable cover.
Under no circumstances should you 
ever undo or remove any other 
covers. Refer servicing only to 
suitably qualified professional 
service personnel.
12. When the projector is under 
operation, you may sense some 
heated air and odor from its 
ventilation grill. It is a normal 
phenomenon and not a product 
defect. 
						

							Important safety instructions 5
Safety Instructions (Continued)
13. Do not place this projector in any of 
the following environments.
- Space that is poorly ventilated or 
confined. Allow at least 50 cm clearance 
from walls and free flow of air around 
the projector. 
- Locations where temperatures may 
become excessively high, such as the 
inside of a car with all windows rolled up.
- Locations where excessive humidity, 
dust, or cigarette smoke may 
contaminate optical components, 
shortening the projector's life span and 
darkening the image.
- Locations near fire alarms
- Locations with an ambient temperature 
above 40°C / 104°F
- Locations where the altitudes are higher 
than 3000 m (10000 feet).
14. Do not block the ventilation holes. 
- Do not place this projector on a blanket, 
bedding or any other soft surface. 
- Do not cover this projector with a cloth 
or any other item. 
- Do not place inflammables near the 
projector.   
If the ventilation holes are seriously 
obstructed, overheating inside the 
projector may result in a fire.
15. Always place the projector on a level, 
horizontal surface during operation.
- Do not use if tilted at an angle of more 
than 10 degrees left to right, nor at angle 
of more than 15 degrees front to back. 
Using the projector when it is not fully 
horizontal may cause a malfunction of, or 
damage to, the lamp. 
3000 m
(10000 feet)
0 m
(0 feet) 
						

							Important safety instructions 6
Safety Instructions (Continued)
16. Do not stand the projector on end 
vertically. Doing so may cause the 
projector to fall over, causing injury or 
resulting in damage to the projector.
17. Do not step on the projector or place 
any objects upon it. Besides probable 
physical damage to the projector, 
doing so may result in accidents and 
possible injury.18. Do not place liquids near or on the 
projector. Liquids spilled into the 
projector may cause it to fail. If the 
projector does become wet, 
disconnect it from the power supply's 
wall socket and call BenQ to have the 
projector serviced.
19. This product is capable of displaying 
inverted images for ceiling mount 
installation. 
Use only BenQ's Ceiling Mount Kit for 
mounting the projector and ensure it is 
securely installed.  
						

							Introduction 7
Introduction
Projector features
This model is one of the best projectors available in the world. You can enjoy the best 
video quality across various devices such as PC, laptop, DVD and VCR even document 
camera to bring all possibility to life.
The projector offers the following features.
• SmartEco™ starts your dynamic power saving
• LAN display for network control and web server
• LAN display 4-1 (maximum 4PC/ NB display to 1 projector)
• Remote desktop feature for LAN and USB display 1-M (maximum 1PC/ NB can display 
to 8 projectors at the same time)
• USB display supports computer connection via USB mini-B type to A type cable
• USB Reader supports USB flash drive or HDD display
• Variable audio output
• Microphone input with big speaker (20W x 1) can save extra audio systems for schools
• Wall color correction allowing projection on surfaces of several predefined colors
• Quick auto search speeding up the signal detecting process
• Selectable password protected function
• 3D color management allowing color adjusents to your liking
• Selectable quick cooling function makes the projector cool in a shorter time
• Presentation timer for better control of time during presentations
• One-key auto-adjustment to display the best picture quality
• Digital keystone correction to correct distorted images
• Adjustable color balance control for data/video display
• High brightness projection lamp
• Multi-language On-Screen Display (OSD) menus
• Component HDTV compatibility (YP
bPr)
• Less than 0.5 W power consumption in standby mode
• WXGA (MW767), perfect for widescreen NB and PC, and provides 30% more images 
to XGA
• Optional PointDraw™ interactive pen and document camera to better your learning 
experience.
• The apparent brightness of the projected image will vary depending on the ambient lighting 
conditions, selected input signal contrast/brightness settings, and is proportional to 
projection distance.
• The lamp brightness will decline over time and may vary within the lamp manufacturers 
specifications. This is normal and expected behavior. 
						

							Introduction 8
Shipping contents
Carefully unpack and verify that you have all of the items shown below. If any of these items 
are missing, please contact your place of purchase.
Standard accessories
The supplied accessories will be suitable for your region, and may differ from those illustrated.
*The warranty card is only supplied in some specific regions. Please consult your dealer for 
detailed information.
MX766/MW767 projector MX822ST projector
Remote control with batteries Power cord (2.9m for MX822ST)
VGA cable Quick start guide
User manual CD Warranty card* 
						

							Introduction 9
Optional accessories
* The PointDraw pen is not sold worldwide. If you would like to purchase it, please contact 
the regional point of sale.1. Spare lamp kit
2. Ceiling mount kit
3. BenQ wireless dongle4. PointDraw pen
5. Wall mount kit
6. Document camera 
						

							Introduction 10
Projector exterior view
1. External control panel 
(See"Projector" on page 12 for 
details.)
2. Lamp cover
3. Focus ring (MX766/MW767) 
Focus slide lever (MX822ST) 
4. Projection lens
5. Lens cover
6. Vent (heated air exhaust)
7. Speaker
8. Zoom slide lever (MX766/MW767)
9. Front IR remote sensor
10. Quick-release button
Front/upper side
(MX766/MW767)
9
8
1
2
4
6
10
5
3
7
(MX822ST)
9
3
1
2
4
6
5
7
10