BenQ Mx766/mw767/mx822st Digital Projector User Manual

							Operation51
• The illustrations in web page control, Q Presenter and USB Reader sections are for the 
purpose of explanation and may differ from the actual design of your projector.
3. Click Download to save Q Presenter software on your computer.
You can also link to the web page control from Q Presenter > Settings > Advanced Setting > 
Control projector via web page on page 62.
4. Execute the program installation.
5. Open Q Presenter, search and connect a network display. See "Displaying image 
through Q Presenter" on page 59 for details.
The Virtual Keypad page allows you to operate the projector as if you were using the 
remote control or control panel on the projector. 
i
i 
						

							Operation 52i. These buttons function the same as the ones on the remote control. See 
"Remote control" on page 14 for details.
The Display Setting page allows you to operate the projector as if  you were using the 
OSD menus. These functions are some useful  menu settings.
The Picture Setting page allows you to manage the projector as if  you were using the 
PICTURE menu.
The Information page displays the information and status of this projector. 
						

							Operation53 The Conference Control page allows you to control computer’s display status of all the 
computers linked to this projector.
The Crestron page is only available when you are  on a Wired LAN network. It also allows 
you to control the projector remotely. The Crestron supports RoomView version 6.2.2.9. 
						

							Operation 54i. These buttons function the same as the ones on the OSD menus or remote 
control. See "2. PICTURE" on page 71 and "Remote control" on page 14 for 
details.
The Menu button can also be used to go back to previous OSD menu, exit and save menu 
settings.
ii. To switch input source, click on your desired signal.
iii. You can select a preferred OSD language.
The tools page allows you to manage the projector, configure the LAN control settings and 
secure access of remote network operation on this projector.
i
i
i
ii
iii
iii
iiiv
v
i 
						

							Operation55 i. You can name the projector, keep track of its location and the person in charge 
of it.
ii. You can adjust the Wired LAN settings.
iii. Once set, access to the remote network operation on this projector has been 
password-protected.
iv. Once set, access to the tools page has been password-protected.
After making the adjusents, press the Send button and the data will be saved in the projector.
v. P re s s  exit to go back to the Crestron remote network operation page.
The info page displays the information and status of this projector.
i. Press exit to go back to the Crestron remote network operation page.
The Admin page allows you to enter Basic, Wired LAN, Wireless LAN and Mail pages 
once the password is entered. The default password is “0000”. If you want to change the 
password, please enter Basic page.
i 
						

							Operation 56The Basic page allows you to change the password and select connected persons. The 
number of connected persons may affect the network display performance. 
						

							Operation57 The Wired LAN page allows you to adjust the Wired LAN settings.
The Wireless LAN page allows you to adjust the Wirless LAN settings.
Max. length for SSID string is 16 bytes. Please use a different SSID when more than two 
projectors are connecting through wireless LAN. 
						

							Operation 58The Mail page allows you to send alert e-mail to your ITS administrator.
You can first try the Mail Test function to check if the Alert Mail works. 
						

							Operation59
Displaying image through Q Presenter
The Q Presenter is an application running on the host PC. It connects to an available 
network display and transfers the desktop contents to the network display via local 
network connection.
Be sure to turn off other virtual network control programs before using Q Presenter.
1. Connect the projector with the RJ45 cable, and make sure your laptop or computer 
also link to the LAN. See "Configuring the Wired LAN Settings" on page 49 and 
"Configuring the Wireless LAN Settings" on page 49 for details.
2. Find the IP address and enter the address of the projector in the address bar of your 
browser. See "Controlling the projector remotely through a web browser" on page 
50 for details. 
3. Download the Q Presenter, unzip it and complete program installation.
4. Once installed, double click the Q Presenter icon. The Q Presenter page appears.
5. Click the Search icon.
The Search page allows you to search and connect a network display.
i. You can key in the IP address (see "Controlling the projector remotely through a 
web browser" on page 50 for details.) or just click “Search”.
i
ii
iii
iv 
						

							Operation 60ii. Projectors linked in the LAN will be found. Then select the projector you want 
to link.
iii. Click “Connect”. Then you should be able to see the image on projector.
iv. You can click to disconnect all connected projectors..
The Special Feature page allows you to have some advanced functions to manage the 
display image on your projector.
i. Full Screen: whole image display on the projector. Selectable: a square will pop-
up then you can move and drag the area you want to show the audience.
i
ii
iii