BenQ Mx763/mx764 Digital Projector User Manual

							Operation 41
Controlling the projector remotely through a web browser
Once you have the correct IP address for the projector and the projector is on or in standby 
mode, you can use any computer that is on the same local area network to control the 
projector.
•  If you are using Microsoft Internet Explorer, make sure it is version 7.0 or higher.
•  The screenshots in this manual are for reference only, and may differ from the actual 
design.
1. Enter the address of the projector in the address bar of your browser and press Enter.
2. The main page of the Projector Network Display System appears. This web page 
provides access to a variety of functions with a simple click.
3. Click Download to save QPresenter software on your computer. See Displaying 
images through QPresenter on page 49 for details. 
						

							Operation 424. The Virtual Keypad page displays a virtual keypad with which you can control the 
projector as if using the physical keypad on the projector. See Projector on page 10 
for how to operate it.
5. The Display Setting page provides some selective OSD menu items necessary for 
controlling the projector or adjusting the projected pictures. See the chapter Menu 
operation for how to use them. 
						

							Operation 43 6. The Picture Setting page provides all the OSD menu items in the PICTURE menu for 
adjusting the projected pictures. See 2. PICTURE menu on page 60 for how to use 
them.
7. The Information page displays the information about the projector status, network 
status. 
						

							Operation 448. The Conference Control page allows you to control the display location in the same IP 
address when there are multiple users connecting to the projector.
9. The Crestron (eControl) page displays the Crestron eControl user interface. The 
eControl page provides a variety of virtual keys to control the projector or adjust the 
projected pictures. 
i. These buttons function the same as the ones on the OSD menus or remote 
control. See 2. PICTURE menu on page 60 and Remote control on page 11 for 
details.
ii. To switch input source, click your desired signal.
iii. The software is available in multiple languages. 
The Menu button can also be used to go back to previous OSD menu, exit and 
save menu settings.
i
i
ii
i
iii 
						

							Operation 45 The tools page allows you to manage the projector, configure the LAN control settings 
and secure access of remote network operation on this projector.
i. You can name the projector, keep track of its location and the person in charge of 
it.
ii. You can adjust the Network Settings.
iii. Once set, access to the remote network operation on this projector has been 
password-protected.
iv. Once set, access to the tools page has been password-protected.
After making the adjustments, press the Send button and the data will be saved 
in the projector.
v. Press exit to go back to the remote network operation page.
The info page displays the information and status of this projector.
For more information, visit http://www.crestron.com & www.crestron.com/
getroomview.
iv
iii
v
i
ii
Press Exit to 
go back to the 
remote network 
operation page. 
						

							Operation 4610. To have access to the Admin page, you need to enter a password. The page provides 
more network settings. The default password is “0000”. If you want to change the 
password, enter the Basic page.
The Basic page allows you to change the password and set the maximum number of 
connected computers. The number of connected computer may affect the network 
display performance.You can also adjust the Broadcasting, Projection Log In Code, 
AMX Device Discovery and USB Camera settings here. 
						

							Operation 47 The Wired LAN page allows you to adjust the Wired LAN settings.
The Wireless LAN page allows you to adjust the Wireless LAN settings.
The maximum length for SSID is 16 bytes. Please use different SSID when more 
than two projectors are connecting through wireless LAN. 
						

							Operation 48The Mail page allows you to send alert e-mail to your ITS administrator.
You can first try the Mail Test function to check if the Alert Mail works.
11. These quick buttons are always provided on the web page for you to operate the 
projector.
Using the web control lock
This function is designed to prevent unauthorized people from maliciously changing the 
projector settings through the Projector Network Display System.
To enable the function:
1. After your computer is connected to the projector, enter the address of the projector in 
the address bar of your browser and press Enter. 
2. Go to the Admin page of the Projector Network Display System.
3. Enter the current password.
4. Click ON in the Web Control Lock row. 
The next time someone connects to this projector, the Projector Network Display System 
page provides limited functions.
To disable the function:
1. Go to the Admin page of the Projector Network Display System.
2. Enter the current password.
3. Click OFF in the Web Control Lock row.
You can also use the OSD menu to toggle this function:
1. Go to the SYSTEM SETUP: Advanced > Security Settings > Change Security Settings 
menu after opening the OSD menu system. Press MODE/ENTER. The message 
“INPUT PASSWORD” appears. Enter the current password.  
						

							Operation 49 2. If the password is correct, the OSD menu returns to the Security Settings page. Press 
 to highlight Web Control Lock and press  /  to select On or Off.
Displaying images through QPresenter
Downloading and installing QPresenter
QPresenter is an application running on the host PC. It helps connect your computer to an 
available network projector and transfer the desktop contents to the network projector via 
local network connection.
The projector also provides QPresenter for Mac computers. If you are using a Mac computer, 
the projector automatically provides Mac version of the QPresenter for you to download.
1. Enter the main page of the Projector Network Display System. See steps 1-2 on page 41 
for details.
2. Click the Download icon.
3. When the download is complete, install the software to your computer by clicking the 
exe file. Follow the on-screen instructions to complete the installation.
4. Launch QPresenter.
Using QPresenter
1. The Search page allows you to search and connect to a projector.
• To connect to a projector, type the projector IP address and click Connect. 
• To search for projectors, simply click Search to list all the projectors on the same 
local area network. Click the desired projectors in the Search result list, and click 
Connect. You can also type a desired projector name and click Search.
41
25
3
& 
						

							Operation 502. The Special Feature page provides some advanced functions to manage the projected 
images.
• To display a full screen, click Full Screen.
• To display a partial screen, click Selectable. A square appears on your screen. You 
can adjust its size and place it where you want to project.
• To pause projection, click Pause.
• If there are multiple computers connected to the projector, you can decide a 
display location by clicking 1, 2, 3, 4, L, R, or Full Screen.
3. The Basic Settings page allows you to configure QPresenter.
• To activate Remote Desktop function, click Yes. Type the name and password for 
your computer. Go to the projector OSD menu SYSTEM SETUP: Advanced > 
Network Settings > Remote Desktop, and enter Account (the name for your 
computer) and Password, and highlight Connect, press MODE/ENTER.